QUICK REFERENCE GUIDE - UPGNET

← Back to document page

To the condensate management and drain hoseplumbing for different configurations in this document. Nohose clamps are needed for the condensate pan hook leg in the gas line must be furnace controls require correct polarity on the powersupply and a proper & G must be connected to the control board for measure total static pressure add supply duct pressureto the return duct pressure, add pressure drop across the A coil, and add pressure drop across the filter. Ignore negativesigns on the gas pressure for natural gas should be 7 and that forpropane should be 11 Nominal manifold gas pressureis for natural gas and 10 for propane at high fireand for natural gas and for Propane on low thermoplastic evaporator A coil drain pans are to beinstalled in the up-flow/horizontal configuration, then extra 2 minimum spacing may be needed to ensure agai

Inlet gas pressure for natural gas should be 7” and that for ... † Other airflows are available. see Tech Guide for all CFM options. ... QUICK REFERENCE GUIDE

  Guide, Reference, Quick, Natural, Natural gas, Quick reference guide