Search results with tag "In place concrete"
SPECIFICATIONS FOR REINFORCED CAST-IN-PLACE CONCRETE
www.gov.mb.caREINFORCED CAST-IN-PLACE CONCRETE 1.0 DESCRIPTION The Work shall consist of: .1 Supplying of materials and the mixing and placing of reinforced cast-in-place concrete as shown and described on the Drawings and in this Specification, including placing, vibrating, finishing and …
PRECAST CONCRETE CONSTRUCTION - World Housing
www.world-housing.netWet joints are constructed with cast-in-place concrete poured between the precast panels. To ensure structural continuity, protruding reinforcing bars from the panels (dowels) are welded, looped, or otherwise connected in the joint region before the concrete is placed. Dry joints are constructed by bolting or welding together steel plates
308R-16: Guide to External Curing of Concrete
www.concrete.orgproperties of the in-place concrete equal or exceed the design properties of the concrete. The curing period begins at placing and continues until the desired concrete proper-ties have developed. The objectives of curing are to prevent the loss of moisture from concrete and maintain a favorable concrete temperature for a sufficient period of time.
Hollow-core slabs with cast-in-place concrete toppings: A ...
www.pci.orgStrength of Cylindrical Concrete Specimens.11 These cylinders were subjected to the same curing conditions as their companion top block. Each hollow-core slab manufacturer provided a total of twelve 4 × 8 in. (100 × 200 mm) concrete cylinders that were fabricated using the same batch of concrete as the bottom blocks. Com-
COLD WEATHER CONCRETE GUIDE FOR STRUCTURAL …
cemstone.comtemperature of fresh concrete in place. ... (11°C). Note 2: For Lines 2-4, maximum temperature is minimum temperature in the table plus 15°F (9°C). Note 3: For larger section sizes, consult Table 5.1 of ACI 306R-16. ... If water curing is used, the concrete is likely to be exposed to freezing and thawing while in a nearly saturated
Stay-Form The Cast in Place Forming System Project ...
www.amico-stayform.comSTAY-FORM® the stay-in-place concrete forming system Alabama Metal Industries Corporation ® January 2012 AMICO Stay-Form® The stay-in-place concrete form
GENERAL STRUCTURAL NOTES Affiliated Engineers
www.mallenconstruction.com10. retaining walls have been designed for an assumed lateral earth pressure of 110 psf per foot of depth and an assumed surcharge of 200 psf. design assumes well graded and drained backfill. cast-in-place concrete: 1. the latest edition of the following aci standards apply: aci 318 (code) aci 304 (placing)