M4-CG Series General Purpose Application Controller …

M4-CG Series General Purpose ApplicationController Installation GuideApplicationThe CG Series General Purpose Application controllersare well-suited for controlling a wide variety of facilityand HVAC equipment, including fan coils, air handlingunits, packaged HVAC equipment, and central plantequipment. CG Series controllers run pre-engineered anduser-programmed Series controllers include an integral real-time clock,which enables the controllers to monitor and controlschedules, calendars, and trends, and operate forextended periods of time as standalone controllers whenoffline from the Metasys system ProtocolsCG Series controllers can communicate using multiplecommunication protocols depending on model andconfiguration. CGE controllers communicate using theBACnet /IP communication protocol. CGM controllerscommunicate using the BACnet MS/TP, N2 or wirelessZigbee communications protocols, with the addition ofZFR183x Pro Wireless Field Bus controllers in BACnet/IP or BACnet MS/TPcommunication mode are BACnet network-compliantdevices.

desired space so that the controller mounts in the horizontal position. 2. Pull the two bottom mounting clips outward from the controller to the extended position (Figure 4 or Figure 5). 3. Hang the controller on the DIN rail by the hooks at the top of the (DIN rail) channel on the back of the controller (Figure 4 or Figure 5), and position the

Loading..

Tags:

  General, Applications, Controller, Purpose, General purpose application controller

Information

Related search queries