Transcription of MODEL 2900 Downflow - FleckValves
{{id}} {{{paragraph}}}
IMPORTANT: Fill in pertinent information on page 2 for future 2900 DownflowService ManualMODEL 2900 Job Specification SheetPrinted in JOB NO. _____ MODEL NO. _____ WATER TEST _____ CAPACITY PER UNIT_____MAX. _____PER REGENERATION MINERAL TANK SIZE _____ BRINE TANK SIZE & SALT SETTING PER REGENERATION:_____Page 2 2900 CONTROL VALVE SPECIFICATIONS1) Type of Timer (see pages 18-21)A) 7 day or 12 dayB) * 1,250 to 21,250 gallon meter or* 6,250 to 106,250 gallon meter* Other_____ C) Meter Wiring Package1) System #4 - 1 tank; 1 meter; immediate or delayed regeneration2) System #5 - 2 tanks; 2 meters; interlock3) System #6 - 2 tanks; 1 meter; series regeneration4) System #7 - 2 tanks; 1 meter; alternator2) Timer Program Settings (see pages 18 and 19)A) Backwash _____ ) Brine & Slow Rinse _____ ) Rapid Rinse _____ ) Brine Tank Refill _____ ) Drain Line Flow Controllergpm4) Brine Line Flow Controller -_____5) Injector Size # _____6) A) Hard Water By-PassB) No Hard Water By-PassPrinted in 3 MODEL 2900 General Commercial Pre-Installation Check ListWATER PRESSURE: A minimum of 25 pounds of water pressure is required for regeneration valve to FACILITIES: A continuous 110 volt.
IMPORTANT: Fill in pertinent information on page 2 for future reference. MODEL 2900 Downflow Service Manual
Domain:
Source:
Link to this page:
Please notify us if you found a problem with this document:
{{id}} {{{paragraph}}}