TECHNICAL DATA SHEET

513 X 419 Page 1 DeSoto® 513X419 Military Epoxy Polyamide Primer TECHNICAL DATA SHEET Product Description DeSoto® 513X419 military epoxy primer is a high solids, chemical and solvent resistant coating. It is used over aluminum and composite surfaces prior to top coating. Compatible with Desothane® HS topcoats Excellent adhesion and corrosion resistance

Desothane® HS CA8800 Polyurethane Topcoats

50 - 100 minutes 90 hours 7 -10 hours 25 40 40 60 65 hours CA8800CT2 4 - 5 hours 15 - 30 minutes 35 - 45 minutes 40 hours CA8800CT3 3 - 4 hours 10 - 15 minutes 30 - 40 minutes 24 hours 2 -3 hours 5 10 15 20 12 hours CA8800CT5 1 – 2 hours 3 – 5 minutes 10 – 15 minutes 8 hours 25°C (77°F)

Global Military Coatings Guide - PPG AEROSPACE

supply of coatings products for the military aerospace segment of the industry. PPG has a full line of topcoats and primers needed for the industry supporting fighters, trainers, transport aircraft, and helicopters. Our Advanced Performance Coatings have become the industry standard supporting nearly all platforms in the industry.

  Advanced, Coating

Commercial and General Aviation Coatings Guide

PPG Aerospace, PRC-DeSoto is qualified to more Commercial and General Aviation specifications than any other supplier. With more than a thousand types of coatings, we offer the industry’s

  Commercial

Technical Data Sheet - Aerospace

Technical Data Sheet Aerospace Sealants PR-1440 Class B fuel tank sealant Description PR-1440 Class B is an aircraft integral fuel tank sealant. It

  Sheet, Data, Technical, Technical data sheet

Technical Data Sheet - PPG AEROSPACE

thixotropic paste suitable for application by extrusion gun or spatula. It cures at room temperature to form a resilient sealant having excellent adhesion to common aircraft substrates. The following tests are in accordance with AMS-S-8802 Class B specification test methods. Application properties (typical) Color part A black part B off white

  Extrusion, Adhesion

TECHNICAL DATA - PPG AEROSPACE

extrusion gun or spatula. Unlike standard polysulfide fuel tank sealants, it can cure at low temperatures and is unaffected by changes in relative humidity. This sealant has excellent adhesion to common aircraft substrates when correctly primed with PR-1826AP Adhesion Promoter. The following tests are in accordance with AMS 3277

  Extrusion, Adhesion

TECHNICAL DATA SHEET - PPG AEROSPACE

Stir the topcoat slowly during the application. The suggested film thickness is 50 to 100 microns (2.0 to 4.0 mils). For gloss and semi-gloss topcoats this can be accomplished by two or three medium coats with a 50% overlap. With the flat and gunship/matte coatings it may be

  Sheet, Data, Technical, Technical data sheet, Topcoat

Commercial and General Aviation Coatings Guide

Dassault/Falcon France 5 DHMS C4.01 Canada 2 DHMS C4.04 Canada 7, 8, 18 DHMS C4.06 Canada 15 DHMS C4.18 Canada 2 DMS 1786 USA 1 DMS 1850 USA 15 DMS 2104 USA 2 DMS 2143 USA 7 DMS 2144 USA 2 DMS 2433 USA 12 DPM 4838 USA 1 DPM 5391 USA 11 DPM 5893 USA 14 DPM 6456 USA 7, 18 DPM 6546 USA 7, 18 DPM 6568 USA 4 DPM 8226 USA 19

  Falcon, Dassault, Dassault falcon

MIL-PRF-85285 TYPE I CLASS H - ppgaerospace.com

PRODUCT INFORMATION DATA SHEET 17451 Von Karman Avenue, Irvine, CA 92614 Tel (949) 474-0400 (800) 544-3338 . Fax (949) 474-7269 . www.deftfinishes.com

Technical Data Sheet - Jotun

inorganic zinc silicate shop primer, epoxy, epoxy mastic, zinc epoxy, zinc silicate, organic shop primer acrylic, epoxy, polyurethane, polysiloxane Packaging (typical) The volume stated is for factory made colours. Note that local variants in pack size and filled volumes can vary due to local regulations. Size of containers (litres)

  Primer, Polyurethane

PRODUCT DATA SHEET Sikaflex®-11 FC

ONE-COMPONENT ADVANCED POLYURETHANE, ELASTIC JOINT SEALANT AND ADHESIVE DESCRIPTION Sikaflex®-11 FC is a one-component, gun-grade, adhes-ive and sealing compound of permanent elasticity. This dual-purpose material is based on a special moisture-cured polyurethane with an accelerated curing time that meets ASTM C920 Type S, …

  Sikaflex, Polyurethane

PRODUCT DATA SHEET Sikaflex®-1A

materials without a primer. Excellent resistance to aging, weathering. Proven in tough climates around the world. Can be applied to green concrete 24 hours after pour Can be applied to damp concrete 1 hour after getting wet Odorless, non-staining. Jet fuel resistant. Certified to the NSF/ANSI Standard 61 for potable water.

  Sikaflex, Primer

Technical Data Sheet

acrylic, epoxy, polyurethane, polysiloxane Packaging (typical) The volume stated is for factory made colours. Note that local variants in pack size and filled volumes can vary due to local regulations. Size of containers (litres) Penguard Comp B …

  Polyurethane