SUBMITTAL FOR CHARLOTTE PIPE PVC SCHEDULE 40 SOLID …

Injection molded PVC DWV fittings shall conform to ASTM D 2665. Fabricated PVC DWV fittings shall conform to ASTM F 1866. All pipe and fittings shall be manufactured in the United States. All systems shall utilize a separate waste and vent system. Pipe and fittings shall conform to NSF International Standard 14.

  Pvc dwv

Chemical Resistance Guide - Gilson Eng

PVC - (Polyvinyl Chloride) is the most frequently specified of all thermoplastic-piping materials. It has been used success-fully for over 60 years. PVC is characterized by distinctive physical properties, and is resistant to corrosion and chemical attack by acids, alkalis, salt solutions and many other chemicals.

  Guide, Resistance, Chemical, Chloride, Polyvinyl, Chemical resistance guide, Polyvinyl chloride

CHEMICAL COMPATIBILITY GUIDE - Global Supply Line

ABS-DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fi ttings. CPVC — Chlorinated Polyvinyl Chloride Class 23447 conform-ing to ASTM D1784, has physical properties at 73°F similar to those of PVC, and its chemical resistance is similar to or gener-

  Guide, Compatibility, Chemical, Chloride, Polyvinyl, Chemical compatibility guide, Polyvinyl chloride

Concentric Vent Installation Guide - DiversiTech

PVC-DWV, or ABS-DWV pipe and pipe cement. d) Failure to use pipe, fittings or solvents as outlined above can result in unsafe conditions. i. For assembly of PVC piping, DiversiTech Pro-Weld PVC Cement (clear) is recommended. ii. Where primer is required (see Section 4: Solvent Cementing), DiversiTech Pro-Prime PVC Primer (purple) is recommended.

  Vents, Concentric, Pvc dwv, Concentric vent

plumbing for greywater

DWV (“drain waste & vent”) copper drain lines have yellow stripes copper water tubing has red, green, or blue stripes and thicker walls careful not to cut a water line! DWV WATER copper pipe. toilet drains ... ~thread in a PVC cap, or use a cork 2”

  Waste, Nidra, Vents, Greywater, Drain waste amp vent

CATALOG - PVC Electrical Conduit, Plumbing Pipe

PVC Conduit Utility Duct DB-60, DB-100 & DB-120 7 PVC Conduit Utility Duct EB-20 & EB-35 8 elephone Duct - Type CT 8 PVC Pipe Chart Loading Chart 9 Standard Radius PVC Elbows 10 - 13 Special Radius PVC Elbows 14 - 21 Spacers 22 ...

Dimensions & Pressure Ratings - Spears Manufacturing, PVC ...

40 DWV IPS — 80 DWV IPS — SCH 40 ... • AWWA C900/905 – PVC with Cast Iron O.D. for municipal water systems The following Pipe Dimension Reference chart is for quick reference to some of the commonly used sizing classifications and nominal sizes. The following pages give additional detail for widely used PVC & CPVC pipe in IPS and CTS sizes.

2015 Plumbing Rough In Checklist - MyBuildingPermit

Drains, waste and vents (DWV) water tested with a 10’ head for 15 minutes or air tested at 5psi for 15 minutes. Plastic pipe not allowed to be tested with air. (UPC 712.1, 2 & 3) Water lines tested to working pressure or 50 psi for 15 minutes. Plastic water piping not …