Capacitor ordering information guide

CP2102/9 - Silicon Labs

2. Ordering Information Table1.Product Selection Guide Ordering Part Number Internal Programmable ROM (Byte) EEPROM EPROM Calibrated Internal 48MHz Oscillator Supply Voltage Regulator Lead-free (RoHS-Compliant) Package CP2102-GM* 1024 Y N Y Y Y QFN28 CP2109-A01-GM* 1024 N Y Y Y Y QFN28 *Note: Pin compatible with the CP2101-GM.

  Guide, Information, Ordering, Ordering information, Ordering guide

40 V, 200 mA, Low Noise, CMOS LDO Linear Regulator Data ...

Stable with a small 2.2 μF ceramic output capacitor Fixed output voltage options: 1.8 V, 2.5 V, 3.3 V, 3.8 V, and 5.0 V 15 standard voltages between 1.2 V and 5.0 V are available Adjustable output from 1.2 V to V IN – V DO, output can be ... Ordering Guide ...

  Guide, Ordering, Capacitors, Ordering guide

Bootloader Generator User's Guide

Nov 07, 2016 · USER’S GUIDE 2015-2016 Microchip Technology Inc. DS40001779B-page 5 Preface INTRODUCTION This chapter contains general information that will be useful to know before using the Bootloader Generator. Items discussed in this chapter include: • Document Layout • Conventions Used in this Guide • Warranty Registration • Recommended Reading

  Guide, Information

Pad-Mounted, Load-Break Switches and Fuses

2. This document shows ordering information, dimensions, and arrangements of S&C pad-mounted switchgear for three-phase, 12 kV, 17 kV, and 21 kV installations. Pad-mounted switchgear have a maximum voltage rating of either 14.4 kV or 25 kV. The switchgear include externally operable, three-phase, gang-operated switches and/or Type E power fuses.

  Information, Ordering, Ordering information

6.5 V, 500 mA, Ultralow Noise, High PSRR, Fast Transient ...

6.5 V, 500 mA, Ultralow Noise, High PSRR, Fast Transient Response CMOS LDO Data Sheet ADM7170 Rev. D Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable.

  Information, Devices, Analog devices, Analog

–28 V, −200 mA, Low Noise, Linear Regulator Data Sheet …

ADP7182 Data Sheet Rev. M | Page 4 of 32 SPECIFICATIONS V IN = (V OUT − 0.5 V) or −2.7 V (whichever is more negative), EN = V IN, I OUT = −10 mA, C IN = C OUT = 2.2 μF, T J = −40°C to +125°C for minimum/maximum specifications, T A = 25°C for typical specifications, unless otherwise noted. Table 1. Parameter Symbol Test Conditions/Comments Min Typ Max Unit