7 Sealants - Master Builders Solutions

Concrete hardener and dustproofer - Master Builders Solutions

MasterKure HD 300WB is a magnesium fluorosilicate concrete hardener and dustproofer that ... product data sheet and SDS are being used; call Customer Service (1-800-433-9517) to ... understand and follow all Safety Data Sheets and product label information for this product prior to use. The SDS can be

  Sheet, Data, Safety, Data sheet, Safety data, Magnesium, Masterkure

MasterProtect HB 400 - Master Builders Solutions

MasterProtect HB 400 is meant to be applied as a two-coat system, achieving a total dry-film thickness (DFT) of 12–16 mils (0.3 mm–0.4 mm). For re-coat applications one coat applied at 11–5 mils (0.279–0.127) DFT. 2.Apply MasterProtect HB 400 by brush, spray, roller, or spray-and-backroll. Spray apply

  Applied, Spray, Masterprotect

Traffic Coatings MasterSeal M 200 - Master Builders Solutions

7 Coatings DESCRIPTION MasterSeal M 200 is a one-component, moisture curing polyurethane base coat for use in MasterSeal Traffic 1500 and 2000 deck coating systems. PRODUCT HIGHLIGHTS • MasterSeal M 200 has strong adhesion properties • Easy preparation reduces on-site labor costs • Available in both self-leveling and flash/sloping

  Coating, Sealmaster, Coatings masterseal

MasterProtect H 1000 - Master Builders Solutions

Air, substrate, and material temperatures should be 20 °F (-7 °C) and rising at the time of the application. Substrate must be frost free. Do not apply sealer when temperatures are expected to fall below 20 °F (-7 °C) within 12 hours or when rain is expected within 4 hours following application. Maximum application temperature is 95 °F (35 ...

  Masterprotect

Dampproofing MasterSeal 610, 614, 615

and pinholes. Carry coating over exposed top and outside edge of footing. Spread around all joints, grooves, and slots and into all chases, corners, reveals and soffits. Bring the coating to finished grade. 3.Backfilling: Place backfill at least 24–48 hours after application, but within 7 days. Do not rupture or damage the film or displace the

  Sealmaster, Pinholes

Coatings MasterSeal 350 - Master Builders Solutions

EPOXY MORTAR 1.Mix the two components of MasterSeal 350 using the recommended procedures under the Mixing section. 2.Slowly add up to five parts by volume of oven-dried sand to one part of mixed epoxy. 3.For larger applications, a paddle-type (mortar) mixer may be used. However, the A and B components must first be mixed together using

  Types, Epoxy, Mortars, Sealmaster, Epoxy mortar, Masterseal 350

MasterEmaco T 1060 - Master Builders Solutions

for surface prep requirements to permit proper bond. REINFORCING STEEL 1. ... • For professional use only; not for sale to or use ... Master Builders Solutions Construction Systems US, LLC 889 Valley Park Drive, Shakopee, MN 55379 Customer Service +1 (800) 433-9517

  Professional, Master, Prep, Masteremaco

MasterEmaco N 425 - Master Builders Solutions

Technical Data Composition MasterEmaco N 425 is composed of crystalline (quartz) silica and Portland cement. Compressive strength, psi (MPa) ASTM C 109, modified* 1 day 2,150 (14.8) 7 days 5,600 (38.6) 28 days 6,750 (46.5)

  Masteremaco

MasterSeal 550 - Master Builders Solutions

high-pressure water jetting grit blasting and grinding. Spalled concrete should be cut back to ... using a short, stiff bristle brush or roller. Trowel application can be undertaken as necessary. For heavy 6-10 mm depressions, honeycombs etc. use less gauging liquid and …

  Blister, Sealmaster, Blasting

MasterSeal NP 2 - Master Builders Solutions

Precast Gray and Limestone COLORS 40 standard, stocked colors are available. Refer to Master Builders Solutions Color Portfolio for additional colors. YIELD See page 3 for charts STORAGE Store in unopened containers in a cool, clean, dry area. Do not open containers until ready for use. SHELF LIFE PARTS A AND B 1 year when properly stored

  Solutions, Precast, Sealmaster

Louver Finishes &Colors Use the reference chart below to ...

Consult your Greenheck representative for additional cost associated with custom colors. Greenheck offers six standard mica colors available in AAMA 2605 compliant coatings (70% Kynar PVDF/100% Fluoropolymer FEVE). Mica colors are formulated to reproduce the low-gloss metallic luster of anodized aluminum in a wider range of dynamic colors.

  Standards, Color

Acrolon 218 HS Acrylic Polyurethane 5-22

primer and moisture cure urethane zinc primer) • Color and gloss retention for exterior exposure • Fast dry • Outstanding application properties PRODUCT CHARACTERISTICS Finish: Gloss or Semi-Gloss Color: Wide range of colors available Volume Solids: 65% ± 2%, mixed, may vary by color Weight Solids: 78% ± 2%, mixed, may vary by color

  Color, Acrylic, Urethane, Polyurethane, 218 hs acrylic polyurethane

STRUCTURAL PAINTING STANDARD SPECIFICATIONS

EI 05-038 Page 1 of 23 L 05/04/06 Make the following changes to Volume 2 of 3 of the Standard Specifications of January 2, 2002. § 565-2.01 Page 5-103 Delete line 3 and Add “Structural Steel Paint Class 1 708-01” § 565-2.04 Page 5-103 Delete lines 35 …

  Standards, Specification, Structural, Painting, Structural painting standard specifications

Desothane® HS CA8800 Polyurethane Topcoats

Desothane® HS CA8800 Polyurethane Topcoats Product Description Desothane® HS Buffable topcoats are polyurethane coatings used to protect the exterior of aircraft. These high solids topcoats are designed to be applied over Desoprime™ epoxy primers and Desofill™ surfacers.