Carbothane 134 - Carboline
CLEANUP & SAFETY Cleanup Use Thinner # 2 Safety Read and follow all caution statements on this product data sheet and on the MSDS for this product and use personal protective equipment as directed. Ventilation When used in enclosed areas, thorough air circulation must be used during and after application until the coating is cured.
Download Carbothane 134 - Carboline
Information
Domain:
Source:
Link to this page:
Documents from same domain
Bitumastic 300M - Carboline
msds.carboline.comBitumastic 300M PRODUCT DATA SHEET November 2021 300M Page 2 of 4 PERFORMANCE DATA (TYPICAL VALUES) ASTM B117 Salt FogTest Method Blasted steel 2 Coats 300MSystem Results No blistering, rusting or delamination. No measurable undercutting at scribe after 2000 hours ASTM D2794 Impact Blasted steel 2 Coats 300M Impact site diameter, 9.5, 9.5, 12.7 ...
Carbomastic 15 - Carboline
msds.carboline.comGeneric Type Epoxy Mastic Description Aluminium-pigmented, low-stress, high solids mastic with a proven field history. Carbomastic 15 was the pioneer mastic coating in a number of industrial markets and today still provides unmatched levels of barrier protection and corrosion resistance over existing finishes and rusted or
Carbozinc 859 - Carboline
msds.carboline.comGeneric Type Organic Zinc Rich Epoxy Description Low VOC organic zinc epoxy steel primer with extremely fast cure-to-topcoat characteristics for in-shop applications and quick turnaround requirements in the field. Carbozinc 859 has less than 360g/litre VOC (thinned) and is used extensively in virtually all industrial markets. Features
Carbozinc 11 HS - Carboline
msds.carboline.comThese are nominal values. When used as a pre-construction primer thin up to 38 oz/gal using exempt Thinner 236 E. Topcoats Acrylics, Epoxies, Polyurethanes, High Heat Silicones, Silicates and others as recommended by your Carboline sales representative. Not required for certain exposures. A mist-coat/full-coat spray technique is often required to
Carboguard 893 - Carboline
msds.carboline.comBrush Use a medium bristle brush. Roller Use a short-nap synthetic roller cover with phenolic core. APPLICATION CONDITIONS Condition Material Surface Ambient Humidity Minimum 4°C (40°F) 4°C (40°F) 4°C (40°F) 0% Maximum 32°C (90°F) 57°C (135°F) 43°C (110°F) 90% This product simply requires the substrate temperature to be above the ...
Carbothane 134 HG - Carboline
msds.carboline.com24°C (75°F) 8 Hours 8 Hours 7 Days 32°C (90°F) 4 Hours 4 Hours 5 Days These times are based on a 50 micron dry film thickness. Higher film thickness, insufficient ventilation or cooler temperatures will require longer cure times and could result in solvent entrapment and premature failure. *Maximum self-recoat times are indefinite.
Thermaline 450 EP - Carboline
msds.carboline.comSurface profile should be a dense angular 1-3 mils and is best achieved through abrasive blasting. Remove all contaminants that would interfere with the performance of stainless steel for the intended service such as, but not limited to, imbedded iron or chlorides.
Carboguard 890 - Carboline
msds.carboline.comJanuary 2019 890 Page 2 of 4 SUBSTRATES & SURFACE PREPARATION General Surface must be clean and dry. Remove all dirt, dust, oil and all other contaminants. Steel Immersion: ISO 8501 Sa2½ Non-immersion: ISO 8501 Sa2½ 40 to 75µm ISO 8501 St2 or St3 are suitable cleaning methods for mild environments. Galvanized Steel
SELECTION & SPECIFICATION DATA - Carboline
msds.carboline.comto these guidelines to achieve the desired results. Spray Application (General) The following spray equipment has been found suitable and is available from equipment manufacturers. Keep material under mild agitation during application. If spraying stops for more than 10 minutes, recirculate the material remaining in the spray line.
Carboguard 635 - Carboline
msds.carboline.comPotable Water Use: (0200) Beige, (0700) Grey and (0800) White Other Colours: Red and Black Gloss Satin Primer Self-priming Recommended Thickness 100 to 150 microns per coat Solid(s) Content By Volume: 65% ± 2% Theoretical Coverage Rates 25.6m²/litre at 25 microns 6.4m²/litre at 100 microns 4.3m²/litre at 150 microns Allow for loss in mixing ...
Related documents
ENTHONE M-Series
www.hittmarking.comENTHONE M-SERIES Technical Data Sheet Page 5 of 7 ACCESSORY PRODUCTS AD2001 Thinner for nominal adjustments in viscosity. Incrementally add 3-6% by weight. AD2002 Thinner for spray applications. Add 25-40% by volume. AD2003 Retarder to extend open time. Incrementally add 3-6% by weight.
SAFETY DATA SHEET Page: 1 of 10 Klean Strip Lacquer ...
content.interlinebrands.comKlean Strip Lacquer Thinner SAFETY DATA SHEET Supersedes Revision: 12/17/2020 Medical Conditions Generally Aggravated By Exposure: Diseases of the skin, eyes, liver, kidneys, central nervous system and respiratory system. Reports have associated repeated and prolonged overexposure to solvents with neurological and other physiological damage.
STIX - Benjamin Moore & Co.
media.benjaminmoore.comSep 09, 2019 · Environmental Health & Safety Information WARNING! Cancer Hazard. Contains Crystalline Silica that can cause cancer when in respirable form (spray mist or sanding dust). Possible birth defect hazard. Contains, 2,2,4-trimethyl-1,3-pentanediol diisobutyrate, which may cause birth defects based on animal data. Use only with adequate ventilation.
SelectSeal 0™ / 1™ / 422-52™ 2K Urethane Sealer
www.axalta.comClean spray equipment as soon as possible with lacquer thinner or low VOC cleaner in VOC regulated markets. IMPORTANT NOTES 422-5X™ can be used under any Nason® topcoat If sealer dries overnight, scuff and recoat Do NOT apply directly over areas of bare metal DRY TIMES Allow at least 15 minutes flash time before applying topcoats.
SHIMRIN2 BASECOAT SYSTEM - House of Kolor
www.houseofkolor.comClean equipment thoroughly with lacquer thinner, acetone, or urethane reducer (check local regulations). ... See Material Safety Data Sheet and Labels for additional safety information and handling instructions. Created Date: 5/24/2011 10:13:12 AM ...
Ful-Thane 2K Urethane Binder (IB Quality)
www.axalta.comTechnical data sheet SAFETY AND HANDLING For industrial use only by professional, trained painters. Not for sale to or use by the general public. Before using, read and follow all label and SDS/MSDS precautions. If mixed with other components, mixture will have hazards of …