Example: biology
Serial Peripheral Interface (SPI) - learn.sparkfun
Programming for SPI Resources and Going Further Introduction Serial Peripheral Interface (SPI) is an interface bus commonly used to send data between microcontrollers and small peripherals such as shift registers, sensors, and SD cards. It uses separate clock and data lines, along with a select line to choose the device you wish to talk to.
Tags:
Information
Domain:
Source:
Link to this page:
Documents from same domain
Series and Parallel Circuits - learn.sparkfun
learn.sparkfun.comSeries and Parallel Circuits a learn.sparkfun.com tutorial Available online at: http://sfe.io/t81 Contents Series and Parallel Circuits Series Circuits Parallel Circuits
Resistors - learn.sparkfun
learn.sparkfun.comSurface mount resistor decoding ... SMD resistors have their own value-marking system. Decoding the Color Bands Through-hole, axial resistors usually use the color-band system to display their value. Most of these resistors will have four bands of color circling the resistor.
How to Use an Oscilloscope - learn.sparkfun
learn.sparkfun.comBasics of O-Scopes The main purpose of an oscilloscope is to graph an electrical signal as it varies over time. Most scopes produce a two-dimensional graph with time on the x-axis and voltage on the y-axis.
How to Use a Multimeter - learn.sparkfun
learn.sparkfun.comThe first digit on many multimeters is only able to display a '1' so the ranges are limited to1 9.99 instead of 99.99. Hence the 20V max range instead of 99V max range. Warning! In general, stick to DC circuits (the settings on the multimeter with straight lines, not curvy lines).
Light-Emitting Diodes (LEDs) - learn.sparkfun
learn.sparkfun.comIf you connect an LED directly to a current source it will try to dissipate as much power as it's allowed to draw, and, like the tragic heroes of olde, it will destroy itself. That's why it's important to limit the amount of current flowing across the LED. For this, we employ resistors.
How to Read a Schematic - learn ... - SparkFun Electronics
learn.sparkfun.comOverview Schematic Symbols (Part 1) Schematic Symbols (Part 2) Name Designators and Values Reading Schematics Resources and Going Further Overview Schematics are our map to designing, building, and troubleshooting circuits. Understanding how to read and follow schematics is an important skill for any electronics engineer.
Related documents
Tsunami Digital Sound Decoder Diesel Sound User’s Guide
soundtraxx.comvarious aspects of programming your Tsunami Decoder, as well as some tips on troubleshooting. For the power user, the Tsunami Technical Reference provides a list of all the CVs available for use with Tsunami decoders and their exact functions and make-up for those who wish to have a complete
Lecture 7 - Memory
userweb.eng.gla.ac.uk– A k-input ROM requires a k-to-2k decoder – Such a decoder requires 2k, k-input NAND gates, k buffers and k inverters, each with fanout of 2k-1. – 1Mbyte memory would obviously require over 1 million 20 input NAND gates, and 40 buffers/inverters with fanout of half a …