Wet Tantalum Capacitors Sintered Anode …

1 Revision: 05-Feb-20201 Document Number: 40023 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT Tantalum Capacitors Sintered Anode TANTALEX Capacitors for Operation to +125 C, Elastomer-SealedFEATURES Axial through-hole terminations: standard tin / lead (SnPb), 100 % tin (RoHS-compliant) available vishay Sprague model 109D tubular elastomer-sealed, Sintered Anode TANTALEX Capacitors fill the basic requirements for applications where a superior quality, reliable design for industrial, automotive and telecommunications application is desired Model 109D Capacitors are the commercial equivalents of Tansitor style WC, UWC, Mallory-NACC style TLS, TLH and the military style CL64 and CL65, designed to meet the performance requirements of military specification MIL-DTL-3965 Material categorization.

2 For definitions of compliance please see *This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for detailsPERFORMANCE CHARACTERISTICSO perating Temperature: -55 C to +85 C (to +125 C with voltage derating)Capacitance Tolerance: at 120 Hz, +25 C. 20 % standard. 10 %, 5 % available as Leakage Current (DCL max.): at +25 C, +85 C, +125 C: leakage current shall not exceed the values listed in the Standard Ratings Test: Capacitors are capable of withstanding a 2000 h life test at a temperature of +85 C or +125 C at the applicable DC working the life test:1. DCL shall not exceed the initial requirements or 1 A, whichever is The ESR shall meet the initial Change in capacitance shall not exceed 10 % from the initial measurement.

3 For Capacitors with voltage ratings of 15 VDC and below, change in capacitance shall not exceed + 10 %, - 25 % from the initial Packaging: the use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not available due to the unit weightAvailableAvailableAvailableORDERIN G INFORMATION109D207X0006C0E3 MODELCAPACITANCECAPACITANCEDC VOLTAGE RATING CASESTYLE NUMBERRoHS-COMPLIANTTOLERANCEAT +85 CCODEThis is expressedin picofarads. Thefirst two digits arethe significantfigures. The third isthe number ofzeros to followX0 = 20 % X9 = 10 %X5 = 5 %special orderThis is expressed in complete thethree-digit block, zerosprecede the voltagerating. A decimal point isindicated by an R (6R3 = V)SeeRatingsand CaseCodestable0 = no outer sleeveStandard2 = outer plastic filminsulationE3 = 100 % tintermination(RoHS-compliant)Blank = SnPbtermination(standard design) Revision: 05-Feb-20202 Document Number: 40023 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

4 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT (1)For reference only(2)Replaces previous W caseDIMENSIONS in inches [millimeters]CASE CODE BARE TUBE WITH PLASTIC-FILM INSULATING SLEEVELEAD LENGTH D L D (1)C [ ] + / - [ + / - ] [ ] [ ] [ ] F [ ] + / - [ + / - ] [ ] [ ] [ ] T [ ] + / - [ + / - ] [ ] [ ] [ ] K (2) [ ] + / - [ + / - ] [ ] [ ] [ ] RATINGS AND CASE CODES (Standard) F6 V8 V10 V15 V20 V25 V30 V35 V50 V60 V75 V100 V125 [ ] dia. (no. 22 AWG)tinned solderable [ ]max.+ Revision: 05-Feb-20203 Document Number: 40023 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

5 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT / TT110K120FT140FK150T160K170T180FT220 FTF250T270 FTK290TT300K330T350K390T430T540K560T750K 850K1200 KRATINGS AND CASE CODES (Extended) F6 V8 V10 V15 V20 V25 V30 V35 V50 V60 V75 V100 V125 AND CASE CODES (Standard) F6 V8 V10 V15 V20 V25 V30 V35 V50 V60 V75 V100 V125 Revision: 05-Feb-20204 Document Number: 40023 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT / K1000TK1200T / K1500TK1800K2200 KSTANDARD RATINGSCAPACITANCE ( F) CASE CODEPART NUMBER (1)MAX. ESRAT +25 C 120 Hz( )MAX. -55 C120 Hz( )MAX. DCL( A) ATMAX. CAPACITANCE CHANGE (%) ATMAX. RMSRIPPLE CURRENT120 Hz (mA)+25 C+85 C+125 C-55 C+85 C+125 C6 VDC AT +85 C; 7 VDC AT +125 C + + +14+ +14+ + + +20+ +14+ + + +25+255308 VDC AT +85 C; 5 VDC AT +125 C + + + + +14+ + + +20+ + + +25+2567010 VDC AT +85 C; 7 VDC AT +125 C + + +14+ +14+ +14+ +14+ + + +25+25670 Note(1)Part numbers shown are for units with 20 % capacitance tolerance and uninsulated Capacitors .

6 For 10 % units, change the digit following the letter X from 0 to 9 . For units with outer plastic-film insulation, substitute 2 for 0 at the end of the part number. For RoHS-compliant add E3 RATINGS AND CASE CODES (Extended) F6 V8 V10 V15 V20 V25 V30 V35 V50 V60 V75 V100 V125 Revision: 05-Feb-20205 Document Number: 40023 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT VDC AT +85 C; 10 VDC AT +125 C + + +14+ +14+ + + + + +25+2561020 VDC AT +85 C; 13 VDC AT +125 C +11+ +13+1541025 VDC AT +85 C; 15 VDC AT +125 C +8+ + + +13+ +13+ +13+ +13+ +13+ +25+2558030 VDC AT +85 C; 20 VDC AT +125 C +8+ +8+ + + + + +13+ + + +13+ +25+2555035 VDC AT +85 C; 22 VDC AT +125 C +12+ +13+ +20+2550050 VDC AT +85 C; 30 VDC AT +125 C +5+ +5+ +8+ + + + + +13+ + + +13+ +25+25460 STANDARD RATINGSCAPACITANCE ( F) CASE CODEPART NUMBER (1)MAX.

7 ESRAT +25 C 120 Hz( )MAX. -55 C120 Hz( )MAX. DCL( A) ATMAX. CAPACITANCE CHANGE (%) ATMAX. RMSRIPPLE CURRENT120 Hz (mA)+25 C+85 C+125 C-55 C+85 C+125 CNote(1)Part numbers shown are for units with 20 % capacitance tolerance and uninsulated Capacitors . For 10 % units, change the digit following the letter X from 0 to 9 . For units with outer plastic-film insulation, substitute 2 for 0 at the end of the part number. For RoHS-compliant add E3 Revision: 05-Feb-20206 Document Number: 40023 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT VDC AT +85 C; 40 VDC AT +125 C +5+ +8+ + + + + + + + + +20+2043075 VDC AT +85 C; 50 VDC AT +125 C +5+ +8+ +8+ +8+ + + + + + + +20+20400100 VDC AT +85 C; 65 VDC AT +125 C +7+ +7+ +7+ +7+ +7+ +7+ +7+ +7+ +15+15400125 VDC AT +85 C; 85 VDC AT +125 C +7+ +7+ +7+ +7+ +7+ +7+ +15+15400 STANDARD RATINGSCAPACITANCE ( F) CASE CODEPART NUMBER (1)MAX.

8 ESRAT +25 C 120 Hz( )MAX. -55 C120 Hz( )MAX. DCL( A) ATMAX. CAPACITANCE CHANGE (%) ATMAX. RMSRIPPLE CURRENT120 Hz (mA)+25 C+85 C+125 C-55 C+85 C+125 CNote(1)Part numbers shown are for units with 20 % capacitance tolerance and uninsulated Capacitors . For 10 % units, change the digit following the letter X from 0 to 9 . For units with outer plastic-film insulation, substitute 2 for 0 at the end of the part number. For RoHS-compliant add E3 Revision: 05-Feb-20207 Document Number: 40023 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT RATINGSCAPACITANCE ( F) CASE CODEPART NUMBER (1)MAX. ESRAT +25 C 120 Hz( )MAX. -55 C120 Hz( )MAX. DCL( A) ATMAX. CAPACITANCE CHANGE (%) ATMAX. RMSRIPPLE CURRENT120 Hz (mA)+25 C+85 C+125 C-55 C+85 C+125 C 6 VDC AT +85 C; 7 VDC AT +125 C +13+ +16+ +20+ +25+30670 8 VDC AT +85 C; 5 VDC AT +125 C +13+ +16+ +16+ +20+30670 10 VDC AT +85 C; 7 VDC AT +125 C +13+ +13+ +13+ +16+ +16+ +16+ +20+ +30+ +20+ +25+30670 15 VDC AT +85 C; 10 VDC AT +125 C +13+ +13+ +13+ +16+ +16+ +16+ +20+ +20+ +20+ +30+ +25+30610 20 VDC AT +85 C; 13 VDC AT +125 C +13+ +13+ +16+ +16+20300 25 VDC AT +85 C; 15 VDC AT +125 C +12+ +12+ +13+ +13+ +20+ +20+ +25+ +25+25610 Note(1)Part numbers shown are for units with 20 % capacitance tolerance and uninsulated Capacitors .

9 For 10 % units, change the digit following the letter X from 0 to 9 . For units with outer plastic-film insulation, substitute 2 for 0 at the end of the part number. For RoHS-compliant add E3 Revision: 05-Feb-20208 Document Number: 40023 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT 30 VDC AT +85 C; 20 VDC AT +125 C +10+ +10+ +12+ +12+ +13+ +13+ +20+ +20+ +20+ +25+30590 35 VDC AT +85 C; 22 VDC AT +125 C +10+ +10+ +13+ +20+ +20+ +25+30590 50 VDC AT +85 C; 30 VDC AT +125 C +10+ +10+ +10+ +12+ +20+25420250T109D257X0050T0 +20+ +20+ +25+3055060 VDC AT +85 C; 40 VDC AT +125 C +10+ +10+ +12+ +12+ +16+ +16+ +20+2555075 VDC AT +85 C; 50 VDC AT +125 C +8+ +10+ +10+ +10+ +12+ +12+ +16+ +16+ +20+ +20+ +20+25450 EXTENDED RATINGSCAPACITANCE ( F) CASE CODEPART NUMBER (1)MAX. ESRAT +25 C 120 Hz( )MAX.

10 -55 C120 Hz( )MAX. DCL( A) ATMAX. CAPACITANCE CHANGE (%) ATMAX. RMSRIPPLE CURRENT120 Hz (mA)+25 C+85 C+125 C-55 C+85 C+125 CNote(1)Part numbers shown are for units with 20 % capacitance tolerance and uninsulated Capacitors . For 10 % units, change the digit following the letter X from 0 to 9 . For units with outer plastic-film insulation, substitute 2 for 0 at the end of the part number. For RoHS-compliant add E3 Revision: 05-Feb-20209 Document Number: 40023 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT VDC AT +85 C; 65 VDC AT +125 C +12+ +12+ +10+ +15+ +12+ +15+ +14+ +15+ +15+17440125 VDC AT +85 C; 85 VDC AT +125 C +10+ +12+ +14+ +14+ +15+ +15+17440 EXTENDED RATINGSCAPACITANCE ( F) CASE CODEPART NUMBER (1)MAX. ESRAT +25 C 120 Hz( )MAX. -55 C120 Hz( )MAX. DCL( A) ATMAX.