frame fi xing data sheet - construction fixings

1 Technical data sheet www: constructionfi information detailed in our data sheets is based on technical approvals, formulas and site and laboratory testing under optimum conditions and include a stated safety factor. As we have no direct or indirect control over where or how our products are applied or installed, we do not accept any liability either directly or indirectly arising from the use of our products, whether or not in accordance with any advice, specifi cation or reccomendation given by us and we reccomend site testing of all products for fi xing h1dotfixdnomhefldf B)A)1C)F90 Wings and block profile avoid rotation and hold plug firmly in position.

2 Knock-in protection prevents premature expansion. The countersunk collar prevents the plug from gliding into the materials Approvals Qualities MBR with normal expansion zone for solid building materials. From the left to the right: -Countersunk T / -Screw Hexagon / -Countersunk PZ Easy fastening through wooden building material in concrete. Easy fastening through metal in other solid building materials. Suitable for all through fixing applications. Outside and inside applications. For roof, wall and ceiling. For wood and metal. For all hand Position the Building materials and drill the hole simultaneously through the Building materials into the building material.

3 Take drill hole- and -depth from the table. Clean the drill hole with a brush, then blow it out with a purging pump. Insert the Nylon frame Plug with a pre-assembled screw. Fasten the Building materials with the screw. Tighten the Name Material 1 Nylon Plug Polyamide PA 6A) Screw T30 / T40 Zinc plated steelB) Screw Hexagon Zinc plated steelNo. Name Material C) Screw PZ2 / PZ3 Zinc plated steelFixingtechnical data sheet www: constructionfi information detailed in our data sheets is based on technical approvals, formulas and site and laboratory testing under optimum conditions and include a stated safety factor.

4 As we have no direct or indirect control over where or how our products are applied or installed, we do not accept any liability either directly or indirectly arising from the use of our products, whether or not in accordance with any advice, specifi cation or reccomendation given by us and we reccomend site testing of all products for fi xingPlug size6810 Approved tension loads:NZul- Concrete C20 Natural stoneApproved bending momentNmMZul,s- Galvanised steelFZ = = = Stainless steelFZ = 0 = = anchorage depthmm505050h1 Drill hole depthmm606060d0 Drill hole- in the building materialmm6810dfDrill hole- in the extension partmm6810lPlug lengthmm55 60 80 100 120 140 60 80 100 120 140 160 200 240dnomPlug- mm6810tfixAssembling length usable mm510 30 50 70 90 10 30 50 70 90 110 150 190 Nylon frame Plug MBR-SMBR-STT40x11220002)x11220012)x11220 022)x11220042)

5 X 1122006x 1122008x 1122010x 1122012x 1122014x 1122016x 1122020x 1122024x = part of the approvalMBR-SSHexagonx 1121506x 1121508x 1121510x 1121512x 1121514x 1121516x 1121520x 1121524 MBR-SPSL /PZ311209061)x 1120907x 1120908x 1120910x 1120912x 1120914112100611210081121010112101211210 14112101611210181) Drive PZ2 / 2) Drive T30FZ = existing centrical tractioRecommended loads MBR-SPlug length6810 Recommended tension loads 1):NEmp- Concrete C20 Natural stone1) Safety factor 3 Safety screws A4 Safety screws stainless A2 available on stainless steel / hot dip galvanisedScrews alloyed stainless or hot dip galvanised have to be ordered as single parts, available as T40 and Hexagon (see accessoires).