Transcription of COUPLINGS IC501 INSULATING COUPLING - romac.net
1 1-800-426-9341 COUPLINGSJULY 01, 2017 COUPLINGS1 Special, not common stock gaskets. Price on application. Note: Romac recommends 7 inch long center ring when booting both pipe ends, contact Romac for price and availability. Contact Romac for other available sizes and : INSULATING boots add .3" to the of the pipe, and must be considered when ordering IC501 ORDER: Specify catalog RINGS: Ductile iron per ASTM A 536, Grade 65-45-12. Yellow shopcoat. Epoxy and special coatings available on request. END RINGS: Ductile iron per ASTM A 536, Grade 65-45-12. Color coded RED for Stl.
2 And Std. Stl., BLACK for cast iron and YELLOW for A/C. GASKETS: SBR per ASTM D 2000 MBA 710, compounded for water and sewer service. Other compounds available on AND NUTS: 5/8 high strength, low alloy steel trackhead bolts. roll thread and heavy hex nuts, corrosion- resistant steel. Steel meets AWWA C-111-80 composition specifications. Other materials or special coatings avail-able on request. INSULATING BOOT: Ethylene Propyl-ene Diene Methylene (EPDM) com-pounded for water and sewer service and INSULATING properties. Length: 5 1/2 .OPTIONS: For 14 and larger, see Page 3-24.
3 For other options and specifica-tions, see Page : Romac INSULATING COUPLINGS effec-tively stop electrolytic action by isolat-ing one pipe from the other by means of an INSULATING : End Rings and Center body are cast from duc-tile (nodular) iron, meeting or exceeding ASTM A : NBR (nitrile butadiene rubber) compounded for water and sewer service, also good for hydrocarbons and other : GalvanizedMATERIAL SPECIFICATIONSMATERIAL SPECIFICATIONSMADE IN INSULATING COUPLINGSTYLE 702 COMPRESSION COUPLINGNOM. PIPE SIZEGASKET TO USE FOR IRON PIPE SIZEGASKET TO USE FOR DUCTILE PIPE (inches)BOOT ONLYCOMPLETE4 6 8 10 12 14 LIST PRICEAPPROX.
4 PRICEAPPROX. WT. - - - - - - Special 1 - Special 1 - - $ .75 # $ # # # # # # # # # # #Flexible COUPLINGS do not provide protection against possible pullout of pipe ends in unrestrained COUPLINGS do not provide protection against possible pullout of pipe ends in unrestrained : For an INSULATING COUPLING to fit 6 , order x , with boot to fit If ordering INSULATING boot only, specify (inches)LIST PRICECARTON (lbs.)
5 CATALOG NUMBEROVERALL DIMENSIONS 1/2 702 - 084 $ 12 .95 # 3/4 702 - 105 12 # 1 702 - 132 12 # 1 1/4 702 - 166 12 # 1 1/2 702 - 190 12 # 2 702 - 238 12 # MEETS AWWA C219
