Transcription of 2X versus conventional air filter 3X versus conventional ...
1 AF25149NF and AF27993 NFNanoForce Radial Seal Air Filters for SSG HousingsPerformance Data SheetDescriptionFleetguard NanoForce air filters deliver the cleanest combustion air for large construction and mining engines and equipment. The well proven, robustfeatures of the AF25149NF and AF27993NF provide a premium level of protection. The nanofiber media applies the enhanced filter media pleating and pleat stabilization to deliver superior engine protection and long filter service life. Features Nanofiber filter media provides the highest possible engine protection efficiency without compromising filter life Pleat geometry, spacing and stabilization yields maximum filter performance and long life for lower equipment operating costs Proven radial air filter seal ensures reliable fit in the SSG air housing and easy service events Complete Fleetguard system solution including secondary filter and housing service cover (SP1307).
2 Longer service life achieved versus conventional air filter2 Xthe engine protection versus conventional filters3 XRobust Endplate and HandleStrong filter construction for long life protectionExpanded Metal Outer Wrap and Inner SupportProtect and support the NanoForce mediaNanoForce MediaThe BEST engine protection in the industry New Pleating and Pleat SpacingYields the optimum performance from every unit area of the filter media Radial SealReliable seal with the SSG housing and easy serviceability Spiral Hot-Melt Pleat StabilizingLock in the new pleat design for optimum filter performance and lifeFor more information, visit 2019 Cummins Filtration in USA on Recycled Paper For more detailed information or to find the nearest retailer of Fleetguard products, visit SpecificationsCapacity8,778 g (with nominal 0-5 micron dust)15,978 g (with ISO fine test dust)Rated Air Flow2,400 ft3/min ( m3/min) (with 0-5 micron dust per ISO 5011)Seal TypeRadial on open end (fits SSG radial seal air housings)Outside " ( mm)Inside " ( mm)Overall ( mm)Secondary Air filter (if required)AF25150 Service Cover (required)SP1307 Installation and Use Tips Fleetguard air filters must be used as sets.
3 The OE air filters and air housing cover are not compatible with the Fleetguard filters and cover. Use an air filter restriction measuring device to determine when to change the used air filter . Do not disturb the air filter until an air filter restriction measurement indicates that the filter should be serviced, typically at 25" H2O restriction ( kPa or bar). Use caution when lifting used air filters. The dust capacity (~7,000 g (~ lb)) for a plugged filter plus the filter weight can make the filter heavy to handle. Ensure that no dust or debris is allowed to enter the clean side of the filter housing. Do not disturb the secondary filter element unless it needs to be changed. The secondary air filter should be changed approximately every third primary element change. Follow OE recommendations for properly cleaning and servicing air housing Radial Seal Air FiltrationNanoForce AF27993NF SpecificationsCapacity6,478 g (with nominal 0-5 micron dust)11,777 g (with ISO fine test dust)Rated Air Flow2,058 ft3/min ( m3/min) (with 0-5 micron dust per ISO 5011)Seal TypeRadial on open end (fits SSG radial seal air housings)Outside " ( mm)Inside " ( mm)Overall " ( mm)Secondary Air filter (if required)AF27994 Service Cover (required)SP1307 Applications Off-Highway Mining and Construction Many major OEMs, including Caterpillar , Komatsu , Terex , Liebherr , and others
