Polyiso Insulation
Found 5 free book(s)LIBERTY SBS Application Instructions - BuildSite
www.buildsite.comPolyiso Insulation or DensDeck® DuraGuard LIBERTY™ CAP SHEET LIBERTY™ BASE/PLY SHEET 4" Min 195/8" 131/8" 2" Min Side Lap 4" Min Side Lap 393/8" 393/8" 393/8" Nailable Deck LIBERTY™ MA LIBERTY™ CAP SHEET LIBERTY™ BASE/PLY SHEET 4" Min 9" Max. 18" Max. 1911/16" 2" Min Side Lap 4" Min Side Lap 393/8" Nailable Deck CAP SHEET LIBERTY ...
JM XSPECT ISOFOAM APF BOARD
www.jm.comThermal Insulation: Polyiso provides one of the highest R-values per inch of any rigid insulation (R-6.0 at 1 inch). R means resistant to heat flow. The higher the R-value, the greater the insulating power. R-values for JM XSPECT ISOfoam APF are shown in Table 1, and physical properties are shown in Table 2 (see reverse). Lightweight:
Insulation Guide: California Title 24, 2020
www.jm.comJM’s broad portfolio of quality insulation products for use in High Performance Attics & Walls includes: www.JM.com Fiberglass Spray Foam Blow-In Polyiso Sheathing Air Handler & Ducts in Attic (vented or unvented) Compliance must be demonstrated via energy modeling with CBECC-RES software. Mandatory minimum R-22 attic insulation
Guide to Insulation Sheathing - Energy
www1.eere.energy.govFor unfaced insulation, the permeability is a function of the material thickness. In general most product manufacturers list the permeance of the material based on a thickness of 1 inch. Increasing or decreasing the thickness of the material will affect the permeance. This can become an issue when using XPS foam insulation.
SCOPE - James Hardie
www.jameshardie.comInsulation and Non-Nailable Substrates SEPTEMBER 2014 #19 The guidance and instructions provided in this technical bulletin are valid for and applicable to James Hardie® products only. James Hardie Building Products Inc. makes no warranty or representation with respect to use of the information contained herein for any use other than with James