Search results with tag "J std 002"
TEST METHOD STANDARD ELECTRONIC AND ELECTRICAL …
nepp.nasa.govANSI/J-STD-002 - Solderability Tests For Component Leads, Terminations, Lugs, Terminals and Wires ANSI/J-STD-004 - Requirements For Soldering Fluxes ANSI/J-STD-005 - Requirements For Soldering Pastes ANSI/J-STD-006 - Requirements For Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid
Surface-Mount Glass Passivated Rectifier
www.vishay.comJ-STD-002 and JESD 22-B102 E3, M3, HE3, and HM3 suffix meets JESD 201 class 2 whisker test Polarity: color band denotes cathode end PRIMARY CHARACTERISTICS IF(AV) 1.0 A VRRM 50 V, 100 V, 200 V, 400 V, 600 V, 800 V, 1000 V IFSM 40 A, 30 A EAS 5 mJ IR 1.0 μA, 5.0 μA VF 1.1 V TJ max. 150 °C Package SMA (DO-214AC) Circuit configuration Single ...
Surface-Mount Schottky Barrier Rectifier
www.vishay.comJ-STD-002 and JESD 22-B102 E3, M3, HE3, and HM3 suffix meets JESD 201 class 2 whisker test Polarity: color band denotes the cathode end PRIMARY CHARACTERISTICS IF(AV) 3.0 A VRRM 20 V, 30 V, 40 V, 50 V, 60 V IFSM 100 A VF 0.5 V, 0.75 V TJ max. 150 °C Package SMC (DO-214AB) Circuit configuration Single SMC (DO-214AB) Cathode Anode Design Tools ...
Surface Mount PAR Transient Voltage Suppressors
www.vishay.comJ-STD-002 and JESD 22-B102 HE3 suffix meets JESD 201 class 2 whisker test Polarity: heatsink is anode Note (1) Non-repetitive current pulse derated above TA = 25 °C PRIMARY CHARACTERISTICS VBR 11.1 V to 52.8 V VWM 10 V to 43 V PPPM (10 x 1000 μs) 6600 W PPPM (10 x 10 000 μs) 5200 W PD 8 W IFSM 700 A TJ max. 175 °C Polarity Unidirectional ...
General Purpose Plastic Rectifier
www.vishay.comJ-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test Polarity: color band denotes cathode end Note (1) For device using on bridge rectifier application PRIMARY CHARACTERISTICS IF(AV) 1.0 A VRRM 50 V, 100 V, 200 V, 400 V, 600 V, 800 V, 1000 V IFSM (8.3 ms sine-wave) 30 A IFSM (square wave tp = 1 ms) 45 A VF 1.1 V IR 5.0 μA ...
Reference Only - Murata Manufacturing
www.murata.comPer AEC-Q200-002 Meet Table C after testing. ESD Rank: Refer to Item 3. Rating. 18 Solderbility Per J-STD-002 Method b : Not Applicable 75% of the terminations is to be soldered. 19 Electrical Characterization Measured :Capacitance No defects 20 Flammability Per UL-94 Not Applicable 21 Board Flex Epoxy-PCB(1.6mm) ...
Chip Ferrite Bead BLM31 Murata Standard Reference ...
www.murata.comPer AEC-Q200-002 Meet Table A after testing. ESD Rank: Refer to Item 3. Rating 18 Solderability Per J-STD-002 Method b : Not Applicable 95% of the terminations is to be soldered. 19 Electrical Characterization Measured : Impedance No defects 20 Flammability Per UL-94 Not Applicable 21 Board Flex Epoxy-PCB(1.6mm) ...
CSR2512 2 200 ± 200 0.01 - 1 CSR / CSRN Series CSR2010 1 ...
seielect.comAEC-Q200-002 -- Pass With the electrometer in direct contact with the discharge tip, verify the voltage setting at levels of ± 500V, ± 1kV, ± 2kV, ± 4kV, ± 8kV. The electrometer reading shall be within ± 10% for voltages from 500V to ≤ 8kV. Solderability J-STD-002 > 95% Coverage Pass Electrical test not required. Magnification 50 times.
PRCP-MSMF - NIDEC COPAL ELECTRONICS
www.nidec-copal-electronics.comANSI/J-STD-002 Category 2に対応 推奨保存条件: 40 ℃ max./70 % RH max. 製品寸法 (寸法は前ページを参照下さい) トリップの標準作動時間 (23˚C における代表値) 仕様書の内容は予告なく変更されることがあります。
Surface Mount PTC - Bel Fuse
belfuse.comSolderability ANSI/J-STD-002 Board flex(SMD) AEC-Q200-005 Terminal strength AEC-Q200-006 Solder Reflow and Rework Recommendations Profile Feature Pb-Free Assembly Average 3Ramp-Up Rate (Tsmax to Tp) °C/second max Preheat : Temperature Min (Tsmin) Temperature Max (Tsmax) 200 Time (tsmin to tsmax) 150°C °C 60-180 seconds