Example: barber
Chip Ferrite Bead BLM31 Murata Standard Reference ...
Per AEC-Q200-002 Meet Table A after testing. ESD Rank: Refer to Item 3. Rating 18 Solderability Per J-STD-002 Method b : Not Applicable 95% of the terminations is to be soldered. 19 Electrical Characterization Measured : Impedance No defects 20 Flammability Per UL-94 Not Applicable 21 Board Flex Epoxy-PCB(1.6mm) ...
Tags:
Information
Domain:
Source:
Link to this page:
Documents from same domain
Reference Only - Murata Manufacturing
www.murata.comChip Ferrite Bead BLM18 ... Current (mA) DC Resistance ( max.) Remark Initial Values Values After Testing ... high speed signal line BLM18BB050SN1B BLM18BA050SN1D 5±25% 5 500 0.2 0.3 BLM18BA050SN1B BLM18BB100SN1D 10±25% 10 700 0.10 0.20 BLM18BB100SN1B BLM18BA100SN1D
Reference Only Spec No. JENF243F-0031G-01 EMIFIL (Three ...
www.murata.com② Structure S : Built-in Ferrite Beads Type ③ Style ④ Features ⑤ Temperature Characteristics B3:±10%（-40～+85℃ at 20℃） ⑥ Rated Voltage 2A :2A→100VDC、1H→50VDC ⑦ Capacitance Marked three digits system.(Ex. 22pF→220、22000pF→223) ⑧ Lead Type Q55 : Bulk Lead Type :Straight Lead
Reference Only - Murata Manufacturing
www.murata.comPer AEC-Q200-002 Meet Table C after testing. ESD Rank: Refer to Item 3. Rating. 18 Solderbility Per J-STD-002 Method b : Not Applicable 75% of the terminations is to be soldered. 19 Electrical Characterization Measured :Capacitance No defects 20 Flammability Per UL-94 Not Applicable 21 Board Flex Epoxy-PCB(1.6mm) ...
Reference Only - Murata Manufacturing
www.murata.comIt shall be soldered on the Glass-epoxy substrate. Substrate : 100mm×40mm×0.8mm Deflection : 1.0mm Speed of Applying Force : 0.5mm/s Keeping Time : 30s 7-2-3 Vibration It shall be soldered on the substrate. Oscillation Frequency : 10Hz to 55Hz to 10Hz for 1 min Total Amplitude : 1.5mm Testing Time : A period of 2 hours in each of 3 mutually
Related documents
Surface-Mount Glass Passivated Rectifier
www.vishay.comJ-STD-002 and JESD 22-B102 E3, M3, HE3, and HM3 suffix meets JESD 201 class 2 whisker test Polarity: color band denotes cathode end PRIMARY CHARACTERISTICS IF(AV) 1.0 A VRRM 50 V, 100 V, 200 V, 400 V, 600 V, 800 V, 1000 V IFSM 40 A, 30 A EAS 5 mJ IR 1.0 μA, 5.0 μA VF 1.1 V TJ max. 150 °C Package SMA (DO-214AC) Circuit configuration Single ...
Surface-Mount Schottky Barrier Rectifier
www.vishay.comJ-STD-002 and JESD 22-B102 E3, M3, HE3, and HM3 suffix meets JESD 201 class 2 whisker test Polarity: color band denotes the cathode end PRIMARY CHARACTERISTICS IF(AV) 3.0 A VRRM 20 V, 30 V, 40 V, 50 V, 60 V IFSM 100 A VF 0.5 V, 0.75 V TJ max. 150 °C Package SMC (DO-214AB) Circuit configuration Single SMC (DO-214AB) Cathode Anode Design Tools ...
ADP1706/ADP1707/ADP1708 Data Sheet (Rev. A) - Analog …
www.analog.comSoldering Conditions JEDEC J-STD-020 Stresses at or above those listed under Absolute Maximum Ratings may cause permanent damage to the product. This is a stress rating only; functional operation of the product at these or any other conditions above those indicated in the operational section of this specification is not implied. Operation beyond
CSR2512 2 200 ± 200 0.01 - 1 CSR / CSRN Series CSR2010 1 ...
seielect.comAEC-Q200-002 -- Pass With the electrometer in direct contact with the discharge tip, verify the voltage setting at levels of ± 500V, ± 1kV, ± 2kV, ± 4kV, ± 8kV. The electrometer reading shall be within ± 10% for voltages from 500V to ≤ 8kV. Solderability J-STD-002 > 95% Coverage Pass Electrical test not required. Magnification 50 times.
Reference Only - Murata Manufacturing
www.murata.comPer AEC-Q200-002 Meet Table C after testing. ESD Rank: Refer to Item 3. Rating. 18 Solderbility Per J-STD-002 Method b : Not Applicable 75% of the terminations is to be soldered. 19 Electrical Characterization Measured :Capacitance No defects 20 Flammability Per UL-94 Not Applicable 21 Board Flex Epoxy-PCB(1.6mm) ...