Search results with tag "Superheated steam"
DESIGNING STEAM JET VACUUM SYSTEMS
www.graham-mfg.comThe steam should be dry and saturated, unless the system specifi-cations call for superheated steam. To maintain the optimum velocity, and avoid excessive heat loss and pressure drop, all insu-lated steam lines should be sized to match the connections on the ejectors. For dry steam, the inlet line should be taken off the top of main steam header.
Leading the way in pressure relief technology.
www.emerson.comSAFETY VALVE (STEAM) High capacity safety valve for saturated and superheated steam service. Two ring control and optional restricted lift feature. ISOFLEX® seat design provides seat tightness up to 95% of set pressure. TECHNICAL DATA Sizes: 1½" x 3" to 6" x 10" Orifices: 0.994 to 19.29 in2 [6.41 to 124.45 cm2 1100°F [593°C] ASME I and VIII
SOLUTIONS: HOMEWORK #6
civil.colorado.eduSubstituting, the mass flow rate of cold water stream is determined to be () ()= 0.864 kg/s − − = 0.5 kg/s 175.92 83.96 kJ/kg 334.91 175.92 kJ/kg m&2 5-106 Feedwater is heated in a chamber by mixing it with superheated steam. If the mixture is saturated liquid, the ratio of the mass flow rates of the feedwater and the superheated vapor is ...
Steam Sterilization Principles - ISPE
www.ispe.gr.jpSuperheated steam, steam containing excessive liquid water, and steam containing excessive boiler additives or contami-nates (such as rust) should be avoided. Superheated steam ... phase or unloading process as seen in Figure 3. Clean, dry compressed air (process air) is …
Superheated Steam Tables - Gilson Eng
www.gilsoneng.comProperties of Superheated Steam = specific volume, cubic feet per pound h g = total heat of steam, BTU per pound Pressure Lbs. per Sq. In. Total Temperature --Degrees Fahrenheit (t) Abs.