Search results with tag "Asme b16"
PIPING MATERIAL SPECIFICATION (PROJECT STANDARDS …
www.klmtechgroup.comASME B16.21 Nonmetallic Flat Gaskets for Pipe Flanges ASME B16.25 Buttwelding Ends ASME B16.34 Valves-Flanged, Threaded, and Welding End ASME B16.47 Large Diameter Steel Flanges, NPS 26 through NPS 60 ASME B16.48 Line Blanks ASME B18.2.1 Square and Hex Bolts and Screws (Inch Series) ASME B18.2.2 Square and Hex Nuts (Inch Series) ASME …
High Pressure Floating Ball Valve ASME Class 600, 900 & 1500
isvalve.comASME B16.34, API 608, API 6D Pressure test API 598 or API 6D Ends Threaded ASME B16.11, B1.20.1 Socket-weld ASME B16.11 Flanged ASME B16.5 Butt-weld ASME B16.25 3 Anti-static device: Spring loaded contacts provide body-ball-stem continuity 6000 5400 4800 4200 3600 3000 2400 1800 1200 600 0 0 100 200 300 400 500 600 PEEK Viton O-Ring HNBR
NORSOK STANDARD L-005
www.standard.noASME B16.5 Pipe Flanges and Flanged Fittings ASME B16.20 Metallic Gaskets For Pipe Flanges: Ring Joint Spiral Wound And Jacketed ASME B16.25 Buttwelding ends ASME B16.34 Valves - Flanged, Threaded and Welding End ASME B18.2.2 Square and Hex Nuts (Inch Series) ASME B31.3 Process Piping ASME B36.10M Welded and Seamless Wrought Steel Pipe …
Gate, Globe & Check Valves
www.lntvalves.comas per ASME B16.47 Series A (MSS SP 44) or Series B (API 605). flanges are offered as optional for Class 600 and aoe. arameer Cmliae API 600 Gate Valve API 600 Globe Valve BS 1873* Check Valve BS 1868* API 603 Gate Valve API 603 ASME B16.34 Gate, Globe, Check Valves ASME B16.34 ASME B16.34 Face-to-face / End-to-end dimension ASME B16.10
API 6D - Delta Pacific Valve Manufacturing Company
www.deltapacificvalve.comCONSTRUCTION API 6D FIRESAFE DESIGN API 6FA and British Standard 6755 Part 2 STYLE 3-Piece Bolted Body, Side Entry, Trunnion Mounted Available in Full Bore and Reduced Bore Patterns FACE-TO-FACE API 6D and ASME B16.10 DIMENSIONS END-TO-END API 6D and ASME B16.10 DIMENSIONS FLANGE END Up to Size 24" ASME B16.5 DIMENSIONS Sizes 26" and ASME B16.47 Series A or B ...
Guide Specification for Copper and Copper Alloy Building ...
www.copper.orgASME B16.21 Nonmetallic Flat Gaskets for Pipe Flanges. 4. ASME B16.22 Wrought Copper and Copper Alloy Solder-Joint Pressure Fittings. 5. ASME B16.23 Cast Copper Alloy Solder-Joint Drainage Fittings - DWV. 6. ASME B16.24 Cast Copper Alloy Pipe Flanges and Flanged Fittings, Class 150, 300, 400, 600, 900, 1500, and 2500. ...
Ring Joint Facings - ASME/ANSI B16.5 & B16.47-2
www.steel-flange.comRing Joint Facings - ASME/ANSI B16.5 & B16.47-2 www.steel-flange.com sales@steel-flange.com Notes - Ring joint gasket dimensions conform to ASME B16.20 (not covered in this summary).
Fisher Large ED/EWD and ET/EWT Valves NPS 12 through 30
www.emerson.comjoint flanges per ASME B16.5. NPS 30 valve size has series A or B flanges, per ASME B16.47 Buttwelding: All ASME B16.25 schedules through schedule 120 that are compatible with the ASME B16.34 valve body rating For other end connections, contact your Emerson sales office for details. Maximum Inlet Pressure(1) Flanged: Consistent with CL150, 300 ...
Sealant Technologies - Gore
www.gore.com• ASME B16.5 Pipe Flanges • ASME B16.47 Series A, Large Diameter Steel Flanges Tolerances: Inside Diameter For NPS 12 and smaller: +/-1.5 mm For NPS 14 and larger: +/-3.0 mm Outside Diameter For NPS 12 and smaller: +0/-1.5 mm For NPS 14 and larger: +0/-3.0 mm A Standard/ID Option ASME B16.21 EN 1514-1 Comments/Use - ID per applicable standard
Standard for the Installation of Sprinkler Systems
www.nfpa.orgButtwelding ends for pipe, valves, flanges, and fittings ASME B16.25 Specification for piping fittings of wrought carbon steel and alloy steel for moderate and elevated temperatures ASTM A 234 Steel pipe flanges and flanged fittings ASME B16.5 Forged steel fittings, socket welded and threaded ASME B16.11 Copper
D101634X012 January 2021 Fisher HP and HPA Control Valves
www.emerson.comper ASME B16.34 Socket Welding: Consistent with CL900, CL1500, and CL2500 per ASME B16.34 Buttwelding: Consistent with CL900, CL1500, CL2500 and intermediate rating CL3200 per ASME B16.34 Also see table 2 Shutoff Classifications See table 3 C‐seal trim: High‐temperature, Class V Bore seal trim: High‐temperature, Class V
Pressure/Temperature Ratings for Fisher Valves (ASME B16 ...
www.emerson.comP/T Ratings for Valves (U.S. Units) D101463X012 Product Bulletin 59.1:021 July 2018 2 Standard Pressure-Temperature Ratings for CL150 and CL300 Valves Fisher valve materials that conform to ASME B16.34-2017 Standard Class pressure-temperature ratings are listed in
Flansche ASME Flanges - rff
www.rff.deFlansche ASME B16.5 Flanges ASME B 16.5 Allgemeine Übersicht General survey 32 Toleranzen Tolerances 33 Nenndrücke, Bemaßung und Dichtflächen Classes, Dimensions and Facings 35 Vorschweißflansche Weld Neck Flanges …
Pipe Flanges and Flanged Fittings
www.abangah-co.comASME B16.5-2009 (Revision of ASME B16.5-2003) Pipe Flanges and Flanged Fittings NPS 1⁄ 2 Through NPS 24 Metric/Inch Standard AN AMERICAN NATIONAL STANDARD
PIPING MATERIAL CLASS DESCRIPTION - Washington
fortress.wa.gov3.5 Flanges . NPS 24 and smaller steel flange dimensions and ratings are to ASME B 16.5. NPS 26 through . NPS . 60 . steel flange dimensions and ratings are to ASME B 16.47 Series A. However, ASME B16.47 Series B may be used when needed to mate with existing equipment.
Robert-James Sales, Inc. ASME B16.47 Ser. A, Ser. B ...
www.rjsales.comASME B16.47 Ser. A, Ser. B INDUSTRY STANDARD and AWWA Flanges Weld Neck, Slip-On, Blind. Class 150 to Class 900 The following section is in order by pressure class due to the
Class 300, Welding Neck, Slip-On and Threaded B16.47, Ser ...
www.rjsales.comClass 150 ASME B16.5 4 Nominal Size Outside Dia. O Thk. C Raised Face Dia. R Fillet Radius r Welding Neck Socket B1 Slip-on B2 Lap Joint B3 Welding Neck Y1 Slip-on Socket Y2 Lap
Pressure/Temperature Ratings for Fisher Valves …
www.emerson.comP/T Ratings for Valves (Metric Units) D103315X012 Product Bulletin 59.1:022 July 2018 2 Standard Pressure-Temperature Ratings for CL150 and CL300 Valves Fisher valve materials that conform to ASME B16.34-2017 Standard Class pressure-temperature ratings are listed in
Fisher Vee-Ball V150, V200, and V300 Rotary Control Valves
www.emerson.comConsistent with pressure-temperature ratings per ASME B16.34 and EN12516-1 for the body materials shown in table 1. Specific to CW2M body material, refer to the pressure-temperature ratings shown in table 7. Do not exceed the material temperature capabilities shown below or the allowable pressure drop as shown in tables 8 and 9.
Stainless Steel Pipe, Fittings & Flanges
atlassteels.com.au(Flanges over NPS24/DN 600 to ASME B16.47, API 60S or BS 3293) Plate stainless steel flanges are forged or cut and machined from plate – Table ‘D’, Table ‘E’, etc. Manufacturing specification: AS2129 Waterworks flanges to AS4087 and PN16 flanges to EN 1092-1 are also available subject to enquiry.
Piping Inspection Code
www.nrc.govASME B16.34 Valves-Flanged, Threaded, and Welding End B31.3 Process Piping B31G Manual for Determining the Remaining Strength of Corroded Pipelines Boiler and Pressure Vessel Code, Section VIII, Divisions 1 and 2; Section IX, ASNT SNT-TC-1A CP-189 Standard for Qualification and Certification of Nondestructive Testing Personnel
PRESSURE & TEMPERATURE RATINGS (ASME B16.34)
www.ilshin.com21 <GENERAL NOTE> 1. Flanged-end valve ratings terminate at 1000˚F. <NOTES> (a) Permissible, but not recommended for prolonged use above 800˚F. (b) Permissible, but not recommended for prolonged use above 1100˚F.
GATE VALVES - Bonney Forge Corporation
www.bonneyforge.com11 800 LB. 1500 LB. GATE VALVES- BOLTED BONNET- FULL & REDUCED PORT Materials and trim specifications Page 91 Design construction: API 602 - ASME B16.34 - BS 5352 Testing according to API 598 Marking MSS SP25
www.buffaloflange.com
www.buffaloflange.comASME B16.5-2003 PIPE FLANGES AND FLANGED FITTINGS REDUCING THREADED AND SLIP-ON PIPE FLANGES Nominal Pipe Size [Note NPS 11/2 21/2 Note Note (2)
INTEGRAL FLANGED VALVES - Bonney Forge®
www.bonneyforge.com45 1500 LB. INTEGRAL FLANGED VALVES- GATE TYPE- BOLTED BONNET- FULL PORT Design construction: ASME B16.34 - BS 5352 Full port type Testing according to API 598 Marking MSS SP25 Outside Screw and …
DPV® API 594 Dual Plate Wafer Check Valves
www.deltapacificvalve.comu Dual Plate Design Minimizes Valve Cracking u Design : API 594 Pressure and Reduces Valve Pressure Drop u Body Wall Thickness : API 594 u Spring Loading on Plates Assists Valve Closing u Face-to-Face : API 594 to Ensure Tight Seal and Minimize Slamming u Testing : API 598 u Pin Retaining Plugs Fitted with Graphite u For Fitting Flanges to : ASME B16.5 ...
PIPING PRODUCTS - Prochem
www.prochem.com.au3. ASME B16.5 - Pipe Flanges and Fittings These are commonly referred to by their pressure rating class, (e.g. ANSI 150 or 150lb). This standard specifies that for the standard 304(L) and 316(L) grades, the flanges must be forged, (except for blind flanges which can be made from plate). The most commonly stocked flanges are slip-on, weld neck
ASME B16.11 Forged Fittings - Steel Marts
www.steelmarts.comASME B16.11 Forged Fittings ASME B16.11 Threaded Fittings Supplier in India, Stockist of ASME B16.11 Forged Steel Fittings in Mumbai. Stockholder of Stainless Steel Fittings ASME B16.11, Check ASME B16.11 Fittings Weight ASTM B16.11 is the standard used for the forged steel fittings which includes socket weld and threaded fittings type.
ASME B16.47 Series A (MSS SP-44) Flanges
skflange.comASME B16.47 Series A (MSS SP-44) Flanges Notes - ASME B16.47 Series A flanges (> NPS 26) are MMS SP-44 flanges. MSS SP-44 also covers NPS 12 to NPS 24 flanges which are equivalent to ASME B16.5. MSS SP-44 is the only source for the NPS 22 flange dimensions above. - Dimension B is to be specified by the purchaser.
ASME B16.47 Series A (MSS SP-44) Flanges - Zmc Metal
www.zmcsteel.comFlanges 8-47 ASME B16.47 Series A (MSS SP-44) Flanges Notes - ASME B16.47 Series A flanges (> NPS 26) are MMS SP-44 flanges. MSS SP-44 also covers NPS 12 to NPS 24 flanges
ASME B16.47 Series B (API 605) Flanges - Zmc Metal
www.zmcsteel.comASME B16.47 Series B (API 605) Flanges Notes - ASME B16.47 Series B flanges are API 605 flanges. API 605 has been cancelled. - Class 400 Series A dimensions at NPS 38 and larger also apply to Class 400 Series B flanges.
B16.9-2001 7/23/01 2:40 PM Page 1 ASME B16.9-2001 …
www.trubotvod.ruasme b16.9-2001 factory-made wrought buttwelding fittings a n a m e r i c a n n a t i o n a l s t a n d a r d b16.9-2001 7/23/01 2:40 pm page 1
B16.9-2001 7/23/01 2:40 PM Page 1 ASME B16.9-2001 …
www.zaporarm.ruasme b16.9-2001 factory-made wrought buttwelding fittings a n a m e r i c a n n a t i o n a l s t a n d a r d b16.9-2001 7/23/01 2:40 pm page 1
ASME B16.20 CLASS 150 LB SPIRAL WOUND …
www.mpac-asia.comTable 6 ASME B16.20 CLASS 1500 LB SPIRAL WOUND GASKET DIMENSIONS OD ID OD ID OD ID mm mm mm mm mm mm d4 d3 d2 d1 ½ 63.5 30.3 31.8 19.1 20.1 14.2 ¾ 69.9 38.1 39.6 25.4 26.4 20.6
ASME B16.5 Flanges - C+N,pipe fitting
cnpipefitting.comClass 150 ASME B16.5 Revised 1-99 4 Nominal Size Outside Dia. O Thk. C Raised Face Dia. R Fillet Radius r Welding Neck Socket B 1 Slip-on B 2 Lap Joint B 3 Welding Neck Y 1 Slip-on
ASME B16.5 Class 150 Flanges Bolting Pattern and ...
www.northwestfastener.com11320 FM 529 RD BLDG F HOUSTON, TEXAS 77041 TEL (713) 896- 1166 FAX (713) 896-7879 Class 150 Flanges Bolting Pattern & Bolt Sizes ASME B16.5 All …
ASME B16.5 Class 600 Flanges Bolting Pattern and ...
www.northwestfastener.com11320 FM 529 RD BLDG F HOUSTON, TEXAS 77041 TEL (713) 896- 1166 FAX (713) 896-7879 Class 600 Flanges Bolting Pattern & Bolt Sizes ASME B16.5 All dimensions listed are given in …
ASME B16.47 Series A (Formerly MSS SP44) CLASS 150 LB ...
www.mpac-asia.comTable 14 ASME B16.47 Series A (Formerly MSS SP44) CLASS 150 LB SPIRAL WOUND GASKET DIMENSIONS OD ID OD ID OD ID mm mm mm mm mm mm …
ASME B16.34 PRESSURE / TEMPERATURE RATINGS VALVE …
globalsupplyline.com.auRefer to actual ASME chart for valve selection, this chart (updated as of 2012) is a general guide only. For PN ratings under ISO 75001-1 (AS4331) the pressure/temperature ratings are proportionately extrapolated, refer to ISO 75001-1.
Similar queries
PIPING MATERIAL SPECIFICATION PROJECT STANDARDS, ASME B16, Flanges ASME B16, Flanges, ASME, Series, ASME B16.5, 47 Series, Series B, API 605, API 6D, FLANGE, ASME B16.47 Series, Ring Joint Facings - ASME/ANSI B16, Gasket dimensions, Flanges • ASME B16, Valves, Temperature, ASME Flanges, Flanges ASME B 16, Pipe Flanges and Flanged Fittings, PIPING MATERIAL CLASS DESCRIPTION, Washington, 5 Flanges, ASME B 16, Robert-James Sales, Inc. ASME B16, INDUSTRY STANDARD and AWWA Flanges, Class 300, Welding Neck, Slip-On, V200, and V300 Rotary Control Valves, Pressure, Temperature ratings, Piping Inspection Code, PRESSURE & TEMPERATURE RATINGS, Ratings, GATE VALVES, INTEGRAL FLANGED VALVES, Dual Plate Wafer Check Valves, PIPING PRODUCTS, ASME B16.47 Series A (MSS SP-44) Flanges, 47 ASME B16.47 Series A (MSS SP-44) Flanges, ASME B16.47 Series B (API 605) Flanges, LB SPIRAL WOUND, LB SPIRAL WOUND GASKET DIMENSIONS, ASME B16.5 Flanges, 5 Class 600 Flanges Bolting Pattern, Class 600 Flanges Bolting Pattern & Bolt Sizes ASME B16, PRESSURE / TEMPERATURE RATINGS VALVE