12 SOURCES OF INFORMATION - World Health …

1 12 SOURCES OF INFORMATIONP rofessor Colin H HansenPauline JonesDepartment of Mechanical EngineeringISO International Organization forUniversity of AdelaideStandardizationSouth Australia 5005 Case postale 56 AUSTRALIACH-1211 Gen INTRODUCTIONThis chapter contains a listing of relevant International (ISO & IEC) standards,. Home pages onthe internet which contain important noise control INFORMATION are also listed. The chapterconcludes with collections of noise control case studies, handbooks and or IEC standards are available in all countries from the national member bodies.

2 Wherethere is an equivalent national standard, the member body concerned will probably say so whenasked to supply the ISO or IEC or EN standards have been adopted generally as national standards of the memberbodies of the European Union and the European Free Trade Association. A great deal of theseEN standards are equivalent to ISO or IEC standards. But a group of EN standards concerningsafety of machinery and containing clauses on noise or EN standards which are noise test codesfor specific machines have an international counterpart only in exceptional cases. From outsideEurope one will get these EN standards from the standards organisations CEN or are other regional standard organisations shown in the ISO internet in { } give the corresponding STANDARDS OF THE INTERNATIONAL ORGANIZATION FORSTANDARDIZATION (partly updated January/February 2001)ISO 31-7:1992 Quantities and units -- Part 7: Acoustics { 1 }(Will be revised as ISO 80000-8)ISO/TR 140-13:1997 Acoustics -- Measurement of sound insulation in buildings and of buildingelements -- Part 13.

3 Guidelines { 10 }This part of ISO 140 may be used as an introduction to definitions and measurement procedureswhich are described in the preceding twelve 226:1987 Acoustics -- Normal equal-loudness level contours { 1 }ISO 266:1997 Acoustics -- Preferred frequencies { 1 }318 SOURCES of informationISO 230-5:2000 Test code for machine tools -- Part 5: Determination of the noise emission { 5, 10 }ISO 389-1:1998 Acoustics % Reference zero for the calibration of audiometric equipment -- Part1: Reference equivalent threshold sound pressure levels for pure tones and supra-auralearphones{ 8 } ISO 389-2:1994 Acoustics -- Reference zero for the calibration of audiometric equipent --Part2: Reference equivalent threshold sound pressure levels for pure tones and insert earphones { 8 } ISO 389-3:1994 Acoustics -- Reference zero for the calibration of audiometric equipment --Part3: Reference equivalent threshold force levels for pure tones and bone vibrators { 8 } ISO 389-4.

4 1994 Acoustics -- Reference zero for the calibration of audiometric equipment --Part4: Reference levels for narrow-band masking noise { 8 } ISO/TR 389-5:1998 Acoustics -- Reference zero for the calibration of audiometric equipment --Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequencyrange 8 kHz to 16 kHz { 8 } ISO 389-7:1996 Acoustics -- Reference zero for the calibration of audiometric equipment --Part7: Reference threshold of hearing under free-field and diffuse-field listening conditions { 8 } ISO 532:1975 Acoustics -- Method for calculating loudness level { 1 }ISO 1680: 1999 Acoustics -- Test code for the measurement of airborne noise emitted byrotating electrical machinery (Revision of ISO 1680-1:1986 and ISO 1680-2:1986) { 5, 10 } ISO 1683:1983 Acoustics -- Preferred reference quantities for acoustic levels { 1 }ISO 1999.

5 1990 Acoustics -- Determination of occupational noise exposure and estimation ofnoise-induced hearing impairment { 4 } ISO 2151:1972 Measurement of airborne noise emitted by compressor/primemover-unitsintended for outdoor use.{ 5, 10 } ISO 2533:1975 Standard Atmosphere{ 1 }ISO 2923:1996 Acoustics -- Measurement of noise on board vessels { 5, 10 }ISO/TR 3352:1974 Acoustics -- Assessment of noise with respect to its effect on theintelligibility of speech { 4 } ISO 3381:1976 Acoustics -- Measurement of noise inside railbound vehicles { 5, 10 }319 SOURCES of informationISO 3382:1997 Acoustics -- Measurement of the reverberation time of rooms with reference toother acoustical parameters { 1 } ISO 3740.

6 2000 Acoustics -- Determination of sound power levels of noise SOURCES --Guidelinesfor the use of basic standards and for the preparation of noise test codes { 5, 10 } ISO 3741:1999 Acoustics -- Determination of sound power levels of noise SOURCES using soundpressure --Precision methods for reverberation rooms { 5, 10 } ISO 3743-1:1994 Acoustics -- Determination of sound power levels of noise SOURCES --Engineering methods for small, movable SOURCES in reverberant fields -- Part 1: Comparisonmethod for hard-walled test rooms { 5, 10 } ISO 3743-2:1994 Acoustics -- Determination of sound power levels of noise SOURCES usingsound pressure -- Engineering methods for small, movable SOURCES in reverberant fields --Part2: Methods for special reverberation test rooms { 5, 10 } ISO 3744.

7 1994 Acoustics -- Determination of sound power levels of noise SOURCES using soundpressure -- Engineering method in an essentially free field over a reflecting plane { 5, 10 } ISO/DIS 3745 Acoustics -- Determination of sound power levels of noise SOURCES using soundpressure --Precision methods for anechoic and hemi-anechoic rooms { 5, 10 }ISO 3746:1995 Acoustics -- Determination of sound power levels of noise SOURCES using soundpressure -- Survey method using an enveloping measurement surface over a reflecting plane { 5, 10 }ISO 3747:2000 Acoustics -- Determination of sound power levels of noise SOURCES using soundpressure %Comparison method in situ { 5, 10 } ISO 4412-1:1991 Hydraulic fluid power -- Test code for determination of airborne noise levels-- Part 1: Pumps { 5, 10 } ISO 4412-2:1991 Hydraulic fluid power -- Test code for determination of airborne noise levels-- Part 2.

8 Motors { 5, 10 } ISO 4412-3:1991 Hydraulic fluid power -- Test code for determination of airborne noise levels-- Part 3: Pumps -- Method using a parallelepiped microphone array { 5, 10 } ISO 4869-1:1990 Acoustics -- Hearing protectors -- Part 1: Subjective method for themeasurement of sound attenuation { 11 } ISO 4869-2:1994 Acoustics -- Hearing protectors -- Part 2: Estimation of effective A-weightedsound pressure levels when hearing protectors are worn { 11 } ISO/TR 4869-3:1989 Acoustics -- Hearing protectors -- Part 3: Simplified method for themeasurement of insertion loss of ear-muff type protectors for quality inspection purposes { 11 }320 SOURCES of informationISO/TR 4869-4:1998 Acoustics -- Hearing protectors -- Part 4: Measurement of effective soundpressure levels for level-dependent sound restoration ear-muffs { 11 }ISO/TR 4870:1991 Acoustics -- The construction and calibration of speech intelligibility tests{ 4 }ISO 4871.

9 1996 Acoustics -- Declaration and verification of noise emission values of machineryand equipment { 5, 10 } ISO 4872:1978 Acoustics -- Measurement of airborne noise emitted by construction equipmentintended for outdoor use -- Method for determining compliance with noise limits { 5, 10 }ISO 5128:1980 Acoustics -- Measurement of noise inside motor vehicles { 5, 10 }ISO /DIS 5129 Acoustics -- Measurement sound pressure levels in the interior of aircraft duringflight { 5, 10 }ISO 5131:1996 Acoustics -- Tractors and machinery for agriculture and forestry --Measurementof noise at the operator's position -- Survey method { 5, 10 } ISO 5135:1997 Acoustics -- Determination of sound power levels of noise from air-terminaldevices, air-terminal units, dampers and valves by measurement in a reverberation room { 5, 10 }ISO /DIS 5136 Acoustics -- Determination of sound power radiated into a duct by fans and otherair-moving devices --In-duct method { 5, 10 }ISO 6189:1983 Acoustics -- Pure tone air conduc