1756 ControlLogix Power Supplies Specifications Technical Data

1 Technical Data1756 ControlLogix Power Supplies SpecificationsStandard Power Supplies Catalog Numbers 1756-PA72, 1756-PA75, 1756-PB72, 1756-PB75, 1756-PC75, 1756-PH75 ControlLogix -XT Power Supplies Catalog Numbers 1756-PAXT, 1756-PBXTR edundant Power Supplies Catalog Numbers 1756-PA75R, 1756-PB75 RChassis Adapter Module Catalog Number 1756-PSCA2 ControlLogix Power Supplies are used with the 1756 chassis to provide , , 5V, and 24V DC Power directly to the chassis backplane. Standard, ControlLogix -XT , and redundant Power Supplies are picPa geStandard AC Power Supplies2 Standard DC Power Supplies41756 ControlLogix -XT Power Supplies7 Redundant Power Supplies92 Rockwell Automation Publication 1756-TD005D-EN-E - March 20131756 ControlLogix Power Supplies SpecificationsStandard AC Power SuppliesAttribute1756-PA72/C 1756-PA75/B Input voltage ACInput voltage, nom120V/240V AC Input frequency Hz Input Power , max100VA/100 W Output Power , max75 W @ C ( F)(2)(2)The combination of all output Power ( backplane, 24V backplane, backplane, and backplane) cannot exceed 75 consumption25 W @ C ( F) Power BTU/hr Hold-up time(1)(1)

2 The hold-up time is the time between input voltage removal and DC Power cycles @ 85V AC, 50/60 Hz6 cycles @ 120V AC, 50/60 Hz6 cycles @ 200V AC, 50/60 Hz6 cycles @ 240V AC, 50/60 Hz Inrush current, max20 A Current capacity at A Current capacity at DC4 A Current capacity at DC10 A13 A Current capacity at 24V A Overcurrent protection, maxUser-supplied 15 A(3)(3)Use time-delay type overcurrent protection in all ungrounded conductors. FusingNon-replaceable fuse is soldered in place(4)(4)This fuse is intended to guard against fire hazard due to short circuit conditions. Tr a n s f o r m e r l o a d, m a x100 VAIsolation voltage 250V (continuous), reinforced insulation typeType tested @ 3500V DC for 60 s, Power input-to-backplaneWeight, approx.

3 Kg ( lb) Dimensions 140 x 112 x 145 mm ( x x in.) Module location Left side of 1756 chassis Chassis 1756-A4, 1756-A7, 1756-A10, 1756-A13, 1756-A17 Chassis compatibility Series ASeries B Series B Wire size mm2 (14 AWG) solid or stranded copper wire rated at90 C (194 F), or greater, mm (3/64 in.) insulation maxWire category 1 - on Power ports(5)(5)Use this conductor category information for planning conductor routing as described in the system level installation manual. See the Industrial Automation Wiring and Grounding Guidelines, publication screw torque N m (7 lb in) North American temperature codeT4 Enclosure type rating None (open-style) Rockwell Automation Publication 1756-TD005D-EN-E - March 201331756 ControlLogix Power Supplies SpecificationsAttribute1756-PA72/C, 1756-PA75/B Temperature, operatingIEC 60068-2-1 (Test Ad, Operating Cold),IEC 60068-2-2 (Test Bd, Operating Dry Heat),IEC 60068-2-14 (Test Nb, Operating Thermal Shock) C ( F)Temperature, surrounding air, max60 C (140 F)Temperature, non-operatingIEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat)

4 ,IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock) C ( F) Relative humidityIEC 60068-2-30 (Test Db, Unpackaged Damp Heat) noncondensing VibrationIEC 60068-2-6 (Test Fc, Operating) 2 g @ Hz Shock, operatingIEC 60068-2-27 (Test Ea, Unpackaged Shock) 30 g Shock, nonoperatingIEC 60068-2-27 (Test Ea, Unpackaged Shock) 50 g EmissionsCISPR 11 (IEC 61000-6-4)Class AESD immunityIEC 61000-4-26 kV contact discharges8 kV air dischargesRadiated RF immunityIEC 61000-4-310V/m with 1 kHz sine-wave 80% AM from 2000 MHz10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz3V/m with 1kHz sine-wave 80% AM from MHzEFT/B immunityIEC 61000-4-4 4 kV at 5 kHz on Power portsSurge transient immunityIEC 61000-4-5 1 kV line-line (DM) and 2 kV line-earth (CM)

5 On Power portsConducted RF immunityIEC 61000-4-610 Vrms with 1 kHz sine-wave 80% AM from 150 MHzOscillatory surge withstandIEEE kVVoltage variationIEC 61000-4-1130% dips for 1 period at 0 and 80 on AC supply ports60% dips for 5 and 50 periods on AC supply ports 10% fluctuations for 15 min on AC supply ports>95% interruptions for 250 periods on AC supply portsCertification(1)(1)When marked. See the Product Certification link at for Declarations of Conformity, Certificates, and other certification , 1756-PA75/B ULUL Listed Industrial Control Equipment. See UL File Certified Process Control Equipment. See CSA File Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations.

6 See CSA File Approved Equipment for use in Class I Division 2 Group A,B,C,D Hazardous LocationsCEEuropean Union 2004/108/EC EMC Directive, compliant with:EN 61326-1; , Industrial RequirementsEN 61000-6-2; Industrial ImmunityEN 61000-6-4; Industrial EmissionsEN 61131-2; Programmable Controllers (Clause 8, Zone A & B)European Union 2006/95/EC LVD, compliant with:EN 61131-2; Programmable Controllers (Clause 11)C-TickAustralian Radiocommunications Act, compliant with:AS/NZS CISPR 11; Industrial EmissionsKCKorean Registration of Broadcasting and Communications Equipment, compliant with:Article 58-2 of Radio Waves Act, Clause 34 Rockwell Automation Publication 1756-TD005D-EN-E - March 20131756 ControlLogix Power Supplies SpecificationsStandard DC Power SuppliesAttribute1756-PB72/C 1756-PB75/B 1756-PC75/B 1756-PH75/B Input voltage range DC DC DC Input voltage, nom 24V DC 48V DC 125V DC Input Power , max 95 W Output Power , max 75 W @ C ( F)(2)(2)The combination of all output Power ( backplane, 24V backplane, backplane, and backplane) cannot exceed 75 consumption 20 W @ C ( F) Power dissipation BTU/hr Hold-up time(1)(1)

7 The hold-up time is the time between input voltage removal and DC Power ms @ 18V DC40 ms @ 24V DC40 ms @ 32V DC 50 ms @ DC nom 50 ms @ DC nom Inrush current, max 30 A 20 A Current capacity at A Current capacity at 4 A Current capacity at 10 A 13 ACurrent capacity at 24V A Overcurrent protection, maxUser-supplied 15 A(3)(3)Use time-delay type overcurrent protection in all ungrounded conductors. FusingNon-replaceable fuse is soldered in place(4)(4)This fuse is intended to guard against fire hazard due to short circuit conditions. Isolation voltage 250V (continuous), reinforced insulation type, Power input-to-backplaneType tested @ 3500V DC for 60 sWeight, approx. kg ( lb) Dimensions 140 x 112 x 145 mm ( x x in.)

8 Module location Left side of 1756 chassis Chassis 1756-A4, 1756-A7, 1756-A10, 1756-A13, 1756-A17 Chassis compatibility Series ASeries BSeries BWire size mm2 (14 AWG) solid or stranded copper wire rated at90 C (194 F), or greater, mm (3/64 in.) insulation maxWire category 1 - on Power ports(5)(5)Use this conductor category information for planning conductor routing as described in the system level installation manual. See the Industrial Automation Wiring and Grounding Guidelines, publication screw torque N m (7 lb in) North American temperature codeT4 IEC temperature codeT4N/AEnclosure type rating None (open-style) Rockwell Automation Publication 1756-TD005D-EN-E - March 201351756 ControlLogix Power Supplies SpecificationsAttribute1756-PB72/C, 1756-PB75/B1756-PC75/B, 1756-PH75/BTemperature, operatingIEC 60068-2-1 (Test Ad, Operating Cold),IEC 60068-2-2 (Test Bd, Operating Dry Heat),IEC 60068-2-14 (Test Nb, Operating Thermal Shock) C ( F) Temperature, surrounding air, max60 C (140 F) Temperature, nonoperatingIEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold)

9 ,IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat),IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock) C ( F) Relative humidityIEC 60068-2-30 (Test Db, Unpackaged Damp Heat) noncondensing VibrationIEC 60068-2-6 (Test Fc, Operating) 2 g @ Hz Shock, operatingIEC 60068-2-27 (Test Ea, Unpackaged Shock) 30 g Shock, nonoperatingIEC 60068-2-27 (Test Ea, Unpackaged Shock) 50 g EmissionsCISPR 11 (IEC 61000-6-4)Class AESD immunityIEC 61000-4-26 kV contact discharges8 kV air dischargesRadiated RF immunityIEC 61000-4-310V/m with 1 kHz sine-wave 80% AM from 2000 MHz10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz3V/m with 1 kHz sine-wave 80% AM from MHzEFT/B immunityIEC 61000-4-4 4 kV at 5 kHz on Power portsSurge transient immunityIEC 61000-4-5 1 kV line-line (DM) and 2 kV line-earth (CM)

10 On Power portsConducted RF immunityIEC 61000-4-610 Vrms with 1 kHz sine-wave 80% AM from 150 MHzOscillatory surge withstandIEEE kVVoltage variationIEC 61000-4-2960% dips for 100 ms on DC supply ports100% dips for 50 ms on DC supply ports 20% fluctuations for 15 min on DC supply ports5 s interruptions on DC supply ports10 ms interruption on DC supply ports6 Rockwell Automation Publication 1756-TD005D-EN-E - March 20131756 ControlLogix Power Supplies SpecificationsCertification(1)(1)When marked. See the Product Certification link at for Declarations of Conformity, Certificates, and other certification , 1756-PB75/B1756-PC75/B, 1756-PH75/BULN/AUL Listed Industrial Control Equipment. See UL File Listed Industrial Control Equipment, certified for US and Canada.