Example: tourism industry

405P 405C 405A - Emerson

TABLE 1: DIMENSIONAL & FLANGE RATINGS REVISION TABLE. (SEE NOTES 9 & 10). REVISION ECO NO. APP'D DATE. FLANGE RATING AQ DSI1051961 JS 2/24/14. FLANGE DESCRIPTION. SIZE B 150# ANSI 300# ANSI 600# ANSI DIN PN16 DIN PN40 DIN PN100 JIS 10K JIS 20K JIS 40K REMOVE BETA CALLOUT FROM NOTE 6. ANSI/DN. THREAD SIZE / (QTY) / STUD LENGTH (NOTE: DIN & JIS LENGTHS GIVEN IN mm). 1/2" 1/2-13 (4) 1/2-13 (4) 1/2-13 (4) M12 (4) 118 M12 (4) 130 M12 (4) 145 M12 (4) 120 M12 (4) 120 M16 (4) 140. DN15 [35]. 1" 1/2-13 (4) 5/8-11 (4) 5/8-11 (4) M12 (4) 120 M12 (4) 135 M16 (4) 165 M16 (4) 130 M16 (4) 140 M16 (4) 140. DN25 [51]. 1-1/2" 1/2-13 (4) 3/4-10 (4) 3/4-10 (4) M16 (4) 120 M16 (4) 135 M20 (4) 175 M16 (4) 130 M16 (4) 150 M20 (4) 150.

dr. size c title boulder, colorado drawing no. approval specials tagging drawing *all dimensions are nominal and are for reference only *unless otherwise specified

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of 405P 405C 405A - Emerson

1 TABLE 1: DIMENSIONAL & FLANGE RATINGS REVISION TABLE. (SEE NOTES 9 & 10). REVISION ECO NO. APP'D DATE. FLANGE RATING AQ DSI1051961 JS 2/24/14. FLANGE DESCRIPTION. SIZE B 150# ANSI 300# ANSI 600# ANSI DIN PN16 DIN PN40 DIN PN100 JIS 10K JIS 20K JIS 40K REMOVE BETA CALLOUT FROM NOTE 6. ANSI/DN. THREAD SIZE / (QTY) / STUD LENGTH (NOTE: DIN & JIS LENGTHS GIVEN IN mm). 1/2" 1/2-13 (4) 1/2-13 (4) 1/2-13 (4) M12 (4) 118 M12 (4) 130 M12 (4) 145 M12 (4) 120 M12 (4) 120 M16 (4) 140. DN15 [35]. 1" 1/2-13 (4) 5/8-11 (4) 5/8-11 (4) M12 (4) 120 M12 (4) 135 M16 (4) 165 M16 (4) 130 M16 (4) 140 M16 (4) 140. DN25 [51]. 1-1/2" 1/2-13 (4) 3/4-10 (4) 3/4-10 (4) M16 (4) 120 M16 (4) 135 M20 (4) 175 M16 (4) 130 M16 (4) 150 M20 (4) 150.

2 DN40 [73]. 2" 5/8-11 (4) 5/8-11 (8) 5/8-11 (8) M16 (4) 140 M16 (4) 145 M24 (4) 180 M16 (4) 130 M16 (8) 150 M16 (8) 150. DN50 [92]. 3" 5/8-11 (4) 3/4-10 (8) 3/4-10 (8) M16 (8) 150 M16 (8) 165 M24 (8) 185 M16 (8) 140 M20 (8) 170 M20 (8) 170. DN80 [127]. 4" 5/8-11 (8) 3/4-10 (8) 7/8-9 (8) M16 (8) 150 M20 (8) 165 M27 (8) 200 M16 (8) 150 M20 (8) 170 M22 (8) 180. DN100 [157]. 5" 3/4-10 (8) 3/4-10 (8) 1-8 (8) M20 (8) 155 M24 (8) 185 M30 (12) 240 M20 (8) 170 M22 (8) 180 M24 (8) 190. DN125 [186]. 6" 3/4-10 (8) 3/4-10 (12) 1-8 (12) M20 (8) 155 M24 (8) 185 M30 (12) 240 M20 (8) 170 M22 (12) 180 M30 (12) 210. DN150 [216]. 8" 3/4-10 (8) 7/8-9 (12) 1-1/8-7 (12) M12 (12) 160 M27 (12) 305 M33 (12) 265 M20 (12) 170 M22 (12) 180 M30 (12) 230.

3 DN200 [270]. 10" 7/8-9 (12) 1-8 (16) 1-1/4-8 (16) M24 (12) 170 M30 (12) 210 M36 (12) 270 M22 (12) 180 M24 (12) 200 M30 (12) 240. DN250 [324]. 12" 7/8-9 (12) 1-1/8-8 (16) 1-1/4/8 (20) M24 (12) 180 M30 (16) 240 M39 (16) 280 M22 (16) 180 M24 (16) 200 M36 (16) 260. DN300 [381]. NOTES: 1. ROSEMOUNT INC. CERTIFIES THIS DRAWING IS IN ACCORDANCE WITH ENGINEERING. SPECIFICATIONS AND ACCURATELY REPRESENTS THE EQUIPMENT FURNISHED. 2. SENSOR ORIENTATION SHOWN FOR DETAIL ONLY. FOR ACTUAL RECOMMENDED LOCATION AND. ORIENTATION REFER TO INSTALLATION MANUAL 00809-0100-4810. 3. FOR MODEL SELECTIONS, REFER TO ROSEMOUNT PRODUCT DATA SHEET 00813-0100-4810. 4. 405 TEMPERATURE LIMITS ARE -40 F TO 450 F FOR DIRECT MOUNT 3 VALVE MANIFOLD, -148 F TO 850 F.

4 FOR REMOTE MOUNT WITH GRAPHOIL VALVE PACKING. 5. MATERIALS: 316/316L STAINLESS STEEL. 6. ORIFICE BORE HAS SQUARE EDGE. 405C/P ONLY. 7. 405 RATED TO 600# ANSI/PN100 316 SST. 8. REMOTE MOUNT 3-VALVE MANIFOLD WITH ADAPTER PLATE AND 1/2" NPT FLANGE ADAPTERS: ADAPTERS CAN BE ROTATED TO GIVE CONNECTIONS CENTERS OF (51), (54) OR (57). 9. ASSEMBLY OF 405 TO FLANGE PIPE SECTION: ALIGNMENT RING WILL HAVE ETCHED FLANGE SIZE TO. BE INDEXED WITH STUDS TO INSURE PROPER ALIGNMENT OF 405 TO PIPE ID. 10. STUDS, NUTS AND GASKETS NOT INCLUDED WITH 405. CORRECT STUD SIZE PER TABLE 1 IS. CRITICAL FOR PROPER ALIGNMENT. RECOMMENDED GASKET: 1/8" MAX THICKNESS WITH APPROPRIATE 405P 405C 405A. MATERAIL FOR APPLICATION CONDITIONS.

5 11. FOR OPTIMUM PERFORMANCE, ORIENTATION AND FLOW DIRECTION IS AS FOLLOWS: GAS: DIRECT MOUNT OR REMOTE MOUNT OPTIONS ARE ACCEPTABLE IN HORIZONTAL OR. DOWNWARD FLOW IN A VERTICAL LINE.. LIQUID: DIRECT MOUNT OR REMOTE MOUNT OPTIONS ARE ACCEPTABLE IN A HORIZONTAL OR. UPWARD FLOWING VERTICAL LINE. IT IS NOT RECOMMENDED FOR USE IN A DOWNWARD FLOWING. *UNLESS OTHERWISE SPECIFIED. DIMENSIONS IN INCHES (MM). TYPE I BOULDER, COLORADO. VERTICAL LINE. DR. P DEEGAN 12/13/11 TITLE. *ALL DIMENSIONS ARE NOMINAL. STEAM: REMOTE MOUNTING OPTION IS ACCEPTABLE IN A HORIZONTAL OR UPWARD FLOWING VERTICAL AND ARE FOR REFERENCE ONLY APPROVAL DIMENSIONAL DRAWING MODEL 405. LINE. DIRECT MOUNTING OPTION IS RECOMMENDED ONLY IN A HORIZONTAL LINE.

6 IT IS NOT. RECOMMENDED FOR USE IN A DOWNWARD FLOWING LINE. DRAWING S IFFT 12/27/11 COMPACT FLOWMETER. TAGGING. SIZE DRAWING NO. 12. SPECIAL CLEANING IS NOT AVAILABLE WITH HIGH TEMPERATURE OPTION ON 405C/P OR ANY 405A. C 00405-1001. SPECIALS. SCALE : NONE SHEET: 1 of 7. REVISION TABLE. DP PRIMARY REVISION ECO NO. APP'D DATE. TEMPERATURE. PORT PLUG. COMPONENTS AQ DSI1051961. DESCRIPTION. JS 2/24/14. (405A ONLY) REMOVE BETA CALLOUT FROM NOTE 6. ISOLATION. VALVE. 1/4" NPT PLUG. FOR RTD CONNECTION. (405A ONLY). EQUALIZER. VALVE. ISOLATION. VALVE [159] OPEN MAX. [152] CLOSED MIN. [210] BOTH OPEN MAX. [197] BOTH CLOSED MIN. OW. FL. [142,7]. FOR ALL. LINE SIZES. ISOLATION. VALVE. B. SEE TABLE 1.

7 2X 1/4" NPT. VENTS. (405C & P ONLY). EQUALIZER. VALVE. ISOLATION. VALVE. NOTE: DIMENSIONS ARE TYPICAL TO. ALL TYPES OF 405 MODELS. [28,58] WITH STANDARD VALVES. TEMPERATURE PORT. (405C & P ONLY). TEMPERATURE PORT. 1/4" NPT PLUG. (405C & P ONLY) . OW *UNLESS OTHERWISE SPECIFIED. TYPE I. FL DIMENSIONS IN INCHES (MM) BOULDER, COLORADO. DR. P DEEGAN 12/13/11 TITLE. *ALL DIMENSIONS ARE NOMINAL. AND ARE FOR REFERENCE ONLY APPROVAL DIMENSIONAL DRAWING MODEL 405. NOTE: ALL INFORMATION TYPICAL TO DRAWING S IFFT 12/27/11 COMPACT FLOWMETER. ALL TYPES OF 405 MODELS UNLESS SIZE DRAWING NO. OTHERWISE NOTED TAGGING. C 00405-1001. SPECIALS. SCALE : NONE SHEET: 2 of 7. REVISION TABLE. DIRECT MOUNT TYPE.

8 CONNECTION OPTIONS. REVISION ECO NO. APP'D DATE. [264] MAX OPEN AQ DSI1051961 JS 2/24/14. [258] MIN CLOSED DESCRIPTION. 3051S ONLY. REMOVE BETA CALLOUT FROM NOTE 6. [261] MAX OPEN. [254] MIN CLOSED. 3051S ONLY. [157] FOR 2051 CFCDC/P. [166] FOR 3051 CFCDC/P. [196] FOR 3051 SFC_C/P. [179] FOR 2051 CFCDA. [188] FOR 3051 CFCDA. [217] FOR 3051 SFC_A. F. 3051 SFC. LINE SIZE F IN(mm). 1/2" (134). 1" (127). 1-1/2" (115). 2" (150). 3" (132). 4" (116). 5" (184). 6" (171). 8" (148). 10" (170) . 12" (144). *UNLESS OTHERWISE SPECIFIED. DIMENSIONS IN INCHES (MM). TYPE I BOULDER, COLORADO. DR. P DEEGAN 12/13/11 TITLE. *ALL DIMENSIONS ARE NOMINAL. AND ARE FOR REFERENCE ONLY APPROVAL DIMENSIONAL DRAWING MODEL 405.

9 DRAWING S IFFT 12/27/11 COMPACT FLOWMETER. TAGGING. SIZE DRAWING NO. C 00405-1001. SPECIALS. SCALE : NONE SHEET: 3 of 7. REVISION TABLE. DIRECT MOUNT TYPE (224) BOTH OPEN MAX REVISION ECO NO. APP'D DATE. CONNECTION OPTIONS (205) BOTH CLOSED MIN AQ DSI1051961 JS 2/24/14. CONT'D DESCRIPTION. REMOVE BETA CALLOUT FROM NOTE 6. 3X VALVE 3051 SMV. LOCK MECHANISM TRANSMITTER. (161) OPEN MAX SHOWN. (154 CLOSED MIN. 3X GRAFOIL. PACKING VALVE. 3051 SMV. TRANSMITTER. & (2010ed.). SHOWN CODE CONFORMANCE TEMPERATURE. VALVE OPTION (ALL) PROBE (RTD). 2X. 2X GASKETS. GASKETS. RTD. CLAMP. COPLANAR/TRADITIONAL. MOUNT ADAPTER PLATE..70. [17,8] 4X. 2X STUDS. TEMPERATURE GASKETS. HOUSING 4X. NUTS. 2X. GASKETS TEMPERATURE.)

10 PROBE (RTD). 4X ALIGNMENT. STUDS RING. 4X. NUTS A3 OPTION COPLANAR/TRADITIONAL. D3 DIRECT MOUNT OPTION. MOUNT ADAPTER (405C/P). 9. W/ TEMP (405C/P).. *UNLESS OTHERWISE SPECIFIED. DIMENSIONS IN INCHES (MM). TYPE I BOULDER, COLORADO. DR. P DEEGAN 12/13/11 TITLE. *ALL DIMENSIONS ARE NOMINAL. ALIGNMENT AND ARE FOR REFERENCE ONLY APPROVAL DIMENSIONAL DRAWING MODEL 405. RING DRAWING S IFFT 12/27/11 COMPACT FLOWMETER. SIZE DRAWING NO. D3 DIRECT MOUNT OPTION TAGGING. C 00405-1001. W/ TEMP (405A) SPECIALS. SCALE : NONE SHEET: 4 of 7. REVISION TABLE. 8. REMOTE MOUNT TYPE REVISION ECO NO. APP'D DATE. MULTIPLE. MOUNTING CONNECTION OPTIONS AQ DSI1051961 JS 2/24/14. ORIENTATIONS DESCRIPTION. 8. REMOVE BETA CALLOUT FROM NOTE 6.


Related search queries