Example: barber
659 PACKAGING AND STORAGE REQUIREMENTS
Ancillary component:A component or entity that may come into contact with a Tertiary packaging component during the distribution, storage, and/or transportation of the packaged article (e.g., pallets, skids, and shrink wrap).
Tags:
Information
Domain:
Source:
Link to this page:
Documents from same domain
1664 〉〉〉〉 ASSESSMENT OF DRUG PRODUCT …
latam-edu.usp.orgadministration ports, overwraps, adminstration accessories, labels, cardboard boxes, and shrink wrap. A Primary Packaging Component is in direct contact or may come into direct contact with the product (e.g., IV bag). A Secondary Packaging Component is in direct contact with a primary packaging component and may provide additional protection
USP <51> Antimicrobial Effectiveness Testing
latam-edu.usp.orgIf the diluted product exhibits antimicrobial properties, specific neutralizers may need to be incorporated into the diluents or the recovery media. The ability of the procedure to measure preservative efficacy may be compromised if the method suitability requires significant dilution (10 −2 or 10 −3) as this will affect the measured recovery
1151 PHARMACEUTICAL DOSAGE FORMS
latam-edu.usp.orgBioavailability (See also In Vitro and In Vivo Evaluation of Dosage Forms á1088ñ and Assessment of Solid Oral Drug Product Performance and Interchangeability, Bioavailability, Bioequivalence, and Dissolution á1090ñ.)Bioavailability is influenced by factors such as the
Module 08 USP 1115 Bioburden Control of Non-Sterile …
latam-edu.usp.orgUnlike aseptic processing for which facility requirements are generally uniform in specification and performance, nonsterile product manufacturing environments typically involve diverse products and microbial contamination control requirements. In general, liquid, cream, or ointment products require a greater level of
USP <71> Sterility Tests - United States Pharmacopeia
latam-edu.usp.orgThe view from USP <1211> Sterilization and Sterility Assurance of Compendial Articles : 6 ... For products containing a mercurial preservative that cannot be tested by the ... Used for sterility testing of viscous products and for devices having tubes with small lumen.
1117 MICROBIOLOGICAL BEST LABORATORY PRACTICES
latam-edu.usp.orgWhenever possible, sampling equipment should be loaded with its microbiological recovery media in the environment that is to be sampled. All testing in laboratories used for critical testing procedures, such as sterility testing of final dosage forms, bulk product, seed
71 〉〉〉〉 STERILITY TESTS
latam-edu.usp.orgof the test. Modify the conditions in order to eliminate the antimicrobial activity, and repeat the Method Suitability Test. This method suitability is performed (a) when the test for sterility has to be carried out on a new product; and (b) whenever there is a change in the experimental conditions of the test.
1092 THE DISSOLUTION PROCEDURE: DEVELOPMENT AND …
latam-edu.usp.org5.4 Precision 5.4.1 Repeatability of Analysis 5.4.2 Intermediate Precision/Ruggedness 5.4.3 Reproducibility 5.5 Robustness 5.6 Stability of Standard and Sample Solutions ... (such as dynamic solubility, potentiometric titration, or turbidity measurement methods). (USP …
STERILIZATION OF COMPENDIAL ARTICLES
latam-edu.usp.orgFor steam and dry heat, the D-value is a function of temperature. In gas sterilization (ethylene oxide, ClO , or O ), D-values are a function of the chemical concentration, relative humidity, and temperature. Similarly, for liquid chemical sterilization the D-value is a function of the temperature and sterilant concentration.
660 〉〉 CONTAINERS—GLASS
latam-edu.usp.orgglass containers will raise the hydrolytic resistance from a moderate to a high level, changing the classification of the glass to Type II. The following recommendations can be made as to the suitability of the glass type for containers for pharmaceutical products, based on the tests for hydrolytic resistance.
Related documents
1664 〉〉〉〉 ASSESSMENT OF DRUG PRODUCT …
latam-edu.usp.orgadministration ports, overwraps, adminstration accessories, labels, cardboard boxes, and shrink wrap. A Primary Packaging Component is in direct contact or may come into direct contact with the product (e.g., IV bag). A Secondary Packaging Component is in direct contact with a primary packaging component and may provide additional protection
HAND BOOK OF MILK PROCESSING, DAIRY PRODUCTS AND …
3.imimg.comPackaging Techniques Reduction of Sugar, Fat and Calories Replacement of Sugar High Intensity Sweeteners Fat Replacers/Mimetics GLOBAL EXPORT POTENTIAL US Food and Drug Administration Regulations Standard of Identify ... Shrink Wrapping Machine Procurement of Packaging Machine
How Peanut Butter is made T - Pennsylvania State University
sites.psu.eduFigure 1 – The yellow flowers bloom, then shrink and the peanuts begin to grow at the roots in the soil. Figure 2- Peanuts in their shells and after the shelling process. screens, blowers, magnets, and destoners. There, they are shaken, ... and ready for packaging.
PACKAGING PHARMACEUTICAL PACKAGING
www.jiwaji.eduShrink wrapper The shrink wrap concept involves the packaging of the product in a thermoplastic film that has been stretched and oriented during its manufacture. An L shaped sealer seals the over wrap The major advantage of this type of wrapper are the flexibility
PHARMACEUTICAL PACKAGING, COMPONENT AND …
pharmaquest.weebly.comPharmaceutical Packaging: Pharmaceutical packaging means the combination of components necessary to contain, preserve, protect & deliver a safe, efficacious drug product, such that at any time point before expiration date of the drug product, a safe & efficacious dosage form is available. Types of Packaging Systems:
Packaging Validation Protocol Template sample
www.gmpsop.compackaging line details] in the packaging area at site [insert site name] . Successful completion of the qualification study will provide a high degree of assurance and documented evidence that the packaged product meets its predetermined specifications and ... PLC controlled labelling machine, stacked and shrink-wrapped, and placed in a shipper,
<659> Packaging and Storage Requirements Type of Posting
www.uspnf.comá659ñ PACKAGING AND STORAGE REQUIREMENTS Change to read: (A portion of the Associated Components section of this chapter will become official on May 1, 2019, and a portion of the Packaging section of this chapter will become official on May 1, 2020, as indicated. Early adoption of the require-ments in this chapter and Plastic Materials of Construction á661.1ñ and …
659 Packaging and Storage Requirements,
www.uspnf.com1 〈659〉 PACKAGING AND STORAGE REQUIREMENTS 2 Change to read: 3 (A portion of the Associated Components section of this chapter will 4 become official on May 1, 2019, and a portion of the Packaging 5 section of this chapter will become official on May 1, 2020, December 1, 2025 6 (USP 1-Aug-2020) as indicated. Early adoption of 7 the requirements in this chapter …
Other transportation-related fees and shipping information 1
www.fedex.com7) is encased in an outer shipping container covered in shrink wrap or stretch wrap; 8) is encased in a soft-sided pack (e.g., courier packs, poly bags and bubble mailers) that exceeds 18 inches along its longest side or 13 inches along its second-longest side or 5 inches in height;