Accessory Fitting Instructions

1 Accessory Fitting Instructions1 of 15 Publication part number 9900776 issue 3 Triumph Designs Ltd. 2017 EnglishThank you for choosing this Triumph genuine Accessory kit. This Accessory kit is the product of Triumph's use ofproven engineering, exhaustive testing, and continuous striving for superior reliability, safety and read all of these Instructions before commencing the installation of the Accessory kit in order tobecome thoroughly familiar with the kit s features and the installation Instructions should be considered a permanent part of your Accessory kit, and should remain with it evenif your Accessory -equipped motorcycle is subsequently Mounting KitKit NumberModels AffectedA9508185 Tiger Explorer, Tiger Explorer XCA9508194 Explorer XR, Explorer XRx, Explorer XRT, Explorer XC, Explorer XCx.

2 Explorer XCAT iger 1200 XR, Tiger 1200 XRX, Tiger 1200 XRX LRH, Tiger 1200 XCX, Tiger 1200 XRT, Tiger 1200 XCAP annier KitKit NumberModels AffectedA9508184 Tiger Explorer, Tiger Explorer XC, Explorer XR, Explorer XRx, Explorer XRT, Explorer XC, Explorer XCx, Explorer XCA,Tiger 1200 XRA9500747 Tiger Explorer, Tiger Explorer XC, Explorer XR, Explorer XRx, Explorer XRT, Explorer XC, Explorer XCx, Explorer XCA,Tiger 1200 XRA9501270 Tiger 1200 XRX, Tiger 1200 XRX LRH, Tiger 1200 XCX, Tiger 1200 XRT, Tiger 1200 XCA2 of 15 Parts Supplied: A9508185, footrest hanger, right hand (A9508194 only)1 off10. End cap2 footrest hanger, left hand (A9508194 only)1 (A9508194 only)2 off12.

3 Nut, M122 third mount, left hand1 off13. Circlip1 third mount, right hand1 off14. Adapter moulding1 boot2 off15. Screw, self-tapping, M4 x 18 mm3 bar1 off16. Screw, M6 x 20 mm4 , link bar1 , M6 x 16 mm2 bush, 12 x 2 mm2 off213546879121013141115161761012163 of 15 Parts Supplied: A9508184, A9500747, assembly, right hand1 , red2 assembly, left hand1 swab1 off213434 of 15 Note: Triumph offers a broad range of approvedgenuine accessories for your motorcycle. We cannot therefore cover all possible equipmentvariations in these Instructions . For removal andinstallation of Triumph Genuine Accessoriesalways refer to the Instructions supplied with therespective Accessory kit.

4 To obtain additional copies of any Triumphaccessory Instructions , visit or contact yourauthorised Triumph the motorcycle on its centre and Tiger 1200 Models OnlyRear Footrest Hanger the left hand and right hand rearfootrests, as described in the Service the footrests and all fixings for the left hand rear footrest hanger, asdescribed in the Service Manual. Retain thefootrest hanger for reuse if the motorcycle is tobe returned to its original condition. Retain thefixings for the left hand rear footrest hanger from thekit with the original fixings. Tighten the fixingsto27 Rear footrest hanger2.

5 The right hand rear footrest hanger, asdescribed in the Service Manual. Retain thefootrest hanger for reuse if the motorcycle is tobe returned to its original condition. Retain thefixings for Accessory kits covered in this instruction aredesigned for use on specific models of Triumphmotorcycle. The Accessory kits and the modelsapplicable are listed at the start of the should not be fitted to any other Triumphmodel or to any other manufacturer s an Accessory kit to a Triumph model notlisted, or to any other manufacturer s motorcyclewill affect the performance, stability and handling ofthe motorcycle.

6 This may affect the rider s ability tocontrol the motorcycle and could cause an have Triumph approved parts, accessoriesand conversions fitted by a trained technician of anauthorised Triumph dealer. The fitment of parts,accessories and conversions by a technician who isnot of an authorised Triumph dealer may affect thehandling, stability or other aspects of themotorcycle s operation which may result in loss ofmotorcycle control and an this operation, ensure that themotorcycle is stabilised and adequately supportedto prevent risk of injury from the motorcycle torque wrench of known accurate calibrationmust be used when Fitting this Accessory kit.

7 Failureto tighten any of the fasteners to the correcttorque specification may affect motorcycleperformance, handling and stability. This may resultin loss of motorcycle control and an of the right hand rear footrest hanger from thekit with the original fixings and spacers the spacers between the footresthanger and motorcycle frame, as shown. Tightenthe fixings to 27 Footrest hanger2. Spacer3. the footrests to the left and right handfootrest hangers, as described in the ModelsInstallation of the Mounting the two split bushes to the link barbracket as shown Bracket2. Split the two screws and washers from theunderside of the mudguard.

8 Retain the washersfor reuse if the motorcycle is to be returned toits original condition. Discard the Screw2. WasherNote: The bracket is fastened to the rear bodyworkwith the screws only. The washers removedpreviously must not be used with the of the bracket, with the brace bar facing towardthe front of the motorcycle and secure using theM6 x 16 mm screws from the kit. Tighten thescrews to Screws, M6 x 16 mm2. a gaiter from the kit to the long side of thelink bar and position as shown Link bar2. the circlip from the kit and place on thelink bar as shown Link bar 2. Gaiter3. CirclipNote: When Fitting the link bar, the circlip must belocated to the right hand side of the the link bar from the right hand the gaiter to the recess in the Link bar2.

9 Gaiter3. Bracket4. Circlip1212121313427 of the remaining gaiter from the kit, slide itover the link bar. Attach to the recess in thebracket as shown Link bar2. Gaiter3. a M12 nut and end cap from the kit to eachend of the link bar. Do not fully tighten the locknut at this : If panniers are to be fitted, do not fully tightenthe link bar end caps and lock nuts at this stage. If panniers are not being fitted, hold the link barend caps and tighten the lock nuts to 8 Nm. 1. Link bar end cap2. NutInstallation of the Pannier Third Mount the left and right third mounts and therubber boots from the : The tapered edge of the rubber boot must face tothe front of the Fit the rubber boots to the Third mount (left hand side)2.

10 Third mount (right hand side)3. Rubber the screws and infill panels from therear footrest brackets and retain them for reuseif the motorcycle is to be returned to its Locate the M6 x 20 mm third mount fixingscrews from the Fit the right hand third mount to the footrestbracket as shown below. 1321212331218 of 15 Note: If panniers are to be fitted, do not fully tightenthe screws at this stage. If panniers are not being fitted, tighten thescrews to 8 Screw, M6 x 20 mm2. Adjuster slot14. Fit the left hand third mount to the footrestbracket as shown below. Note: If panniers are to be fitted, do not fully tightenthe screws at this stage.