Aluminum Electrolytic Capacitors, Power Eurodin, …

1 106 BCcomponents Revision: 14-Dec-20181 Document Number: 28384 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT Electrolytic Capacitors, Power eurodin , Screw TerminalsFig. 1 FEATURES Very long useful life: 20 000 h at 85 C Extremely low ESR and ESL allowing very high ripple current load High resistance to shock and vibration Polarized Aluminum Electrolytic capacitors , non-solid electrolyte Large types, cylindrical Aluminum case, insulated with a blue sleeve Also available in bolt version (106 PED-STB) Pressure relief in the sealing Charge and discharge proof High reliability Material categorization: for definitions of compliance please see Computer, telecommunications, and industrial systems Smoothing and filtering Standard and switched mode Power supplies Energy storage in pulse systemsMARKINGThe capacitors are marked with the following information.

2 Rated capacitance (in F) Tolerance on rated capacitance, code letter in accordance with IEC 60062 (Q for -10 % / +30 %) Rated voltage (in V) Date code (YYMM) Name of manufacturer Code for factory of origin - sign to identify the negative terminal, visible from the top and side of the capacitor Code number Climatic category in accordance with IEC 60068 LL for long life gradeQUICK REFERENCE DATADESCRIPTIONVALUEN ominal case size ( D x L in mm)35 x 60 to 90 x 220 Rated capacitance range (E6 series), CR1000 F to 330 000 FTolerance on CR-10 % to +30 %Rated voltage range, UR25 V to 100 VCategory temperature range-40 C to +85 CEndurance test at 85 C8000 hUseful life at 85 C20 000 hShelf life at 0 V, 85 C500 hBased on sectional specificationIEC 60384-4 / EN 130300 Climatic category IEC 6006840 / 085 / 56101/102 PHR-ST106 PED-SThigherCV/volumeSELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES ( D x L in mm)CR( F)UR (V)

3 2540631001000---35 x 601500---35 x 602200--35 x 6035 x 803300-35 x 6035 x 6035 x 105470035 x 6035 x 6035 x 8050 x 80680035 x 6035 x 8035 x 10550 x 10510 00035 x 8035 x 10550 x 8065 x 10515 00035 x 10550 x 8050 x 10565 x 10522 00050 x 8050 x 10565 x 10576 x 10533 00050 x 10565 x 10565 x 10576 x 14647 00065 x 10565 x 10576 x 10576 x 22068 00065 x 10576 x 10576 x 14690 x 220100 00076 x 10576 x 14676 x 220-150 00076 x 14676 x 220---90 x 14690 x 220-220 00076 x 220---90 x 14690 x 220--330 00090 x 220---106 BCcomponents Revision: 14-Dec-20182 Document Number: 28384 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT in millimeters AND AVAILABLE FORMS Fig. 2A - Mechanical drawings for standard M5 disc details refer to Table 1 Fig.

4 2B - Mechanical drawings for high current M6 disc details refer to Table 1 Note Maximum permissible torque which may be applied to the termination screws: 2 Nm for M5; Nm for M6 For accessories refer to document Mounting Accessories , see The capacitors are delivered with screws and washersTable 1 DIMENSIONS in millimeters AND MASSDESIGNDRAWINGL 1 Lt 1 D 1 P T H B d1 - 0 MbIb (g)35 x x x x x 105 x x 105 x x 105 x x 146 x 220 x 220 x 146 x 220 M x SDLLtHTBd1 LLtHTBd1 MbDlbClamp mounting (ST)Standard M5 discThreaded stud mounting (STB)PSafetyventThread M x SMbDDHTBd1lbLLtHTBd1 LLtClamp mounting (ST)High current M6 discThreaded stud mounting (STB)106 BCcomponents Revision: 14-Dec-20183 Document Number: 28384 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

5 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT For STB version holds: H cardbox box: + 10 mmNote Unless otherwise specified, all electrical values in Tables 2 and 3 apply at Tamb = 20 C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %ORDERING EXAMPLEE lectrolytic capacitor 106 PED-ST series10 000 F / 25 V; -10 % / +30 %Nominal case size: 35 mm x 80 mm, ST versionOrdering code: MAL2 10616103E3 Former 12NC: 2222 10616103 Table 2 PACKAGING QUANTITIES AND DIMENSIONS in millimetersDESIGNPACKAGING QUANTITIES(units per box)CARDBOX DIMENSIONS L x W x H35 x 6050377 x 375 x 8835 x 8050377 x 375 x 12335 x 10550377 x 375 x 12950 x 8025377 x 375 x 12350 x 105 25377 x 375 x 12965 x 10516377 x 375 x 12965 x 105 HC16377 x 375 x 12976 x 10512377 x 375 x 12976 x 105 HC12377 x 375 x 12976 x 14612377 x 375 x 16876 x 146 HC12377 x 375 x 16876 x 220 18520 x 270 x 28076 x 220 HC18520 x 270 x 28090 x 146 HC8377 x 375 x 16890 x 220 HC10520 x 270 x 280 ELECTRICAL DATASYMBOLDESCRIPTIONCRR ated capacitance at 100 Hz, tolerance -10 % to +30 %IRRated RMS ripple current at 100 Hz, 85 CIL5 Max.

6 Leakage current after 5 min at URESRMax. equivalent series resistance at 100 Hz ZMax. impedance at 20 kHzELECTRICAL DATA AND ORDERING INFORMATIONUR (V)CR 100 Hz( F)NOMINALCASE SIZE D x L(mm)IR 100 Hz 85 C (A)IL5 5 MIN. (mA) Hz (m )Z kHz(m )STANDARD M5 DISCHIGH CURRENT M6 DISCST x x 00035 x 00035 x 00050 x 00050 x 00065 x 00065 x 00076 x 00076 x 00076 x 00090 x 00090 x BCcomponents Revision: 14-Dec-20184 Document Number: 28384 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT x x x 00035 x 00050 x 00050 x 00065 x 00065 x 00076 x 00076 x 00076 x 00090 x 00090 x x x x x 00050 x 00050 x 00065 x 00065 x 00076 x 00076 x 00076 x 00090 x x x x x x x 00065 x 00065 x 00076 x 00076 x 00076 x 00090 x DATA AND ORDERING INFORMATIONUR (V)CR 100 Hz( F)NOMINALCASE SIZE D x L(mm)IR 100 Hz 85 C (A)IL5 5 MIN.

7 (mA) Hz (m )Z kHz(m )STANDARD M5 DISCHIGH CURRENT M6 DISCST BCcomponents Revision: 14-Dec-20185 Document Number: 28384 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT (1)Low ESL designs available on requestRIPPLE CURRENT AND USEFUL LIFET able 3 Note Multiplier of useful life code: CCC205-05 Fig. 3 - Multiplier of useful life as a function of ambient temperature and ripple current loadADDITIONAL ELECTRICAL DATAPARAMETERCONDITIONSVALUEV oltageSurge voltageUs = x URReverse voltageUrev 1 VCurrentLeakage currentAfter 1 min at URIL1 CR x UR + 4 FAfter 5 min at URIL5 CR x UR + 4 FInductanceEquivalent series inductance (ESL)Case D = 35 mmTyp.

8 13 nHCase D = 50 mmTyp. 16 nHCase D = 65 mmTyp. 19 nH (1)Case D = 76 mmTyp. 20 nH (1)Case D = 90 mmTyp. 21 nH (1)ENDURANCE TEST DURATION AND USEFUL LIFEENDURANCEAT 85 C(h)USEFUL LIFEAT 85 C(h)800020 (1) multiplier40 CCC205-05 Tamb ( C)IA = actual ripple current at 100 HzIR = actual ripple current at 100 Hz and 85 CWith an absolute maximum of 50 A at 85 C(1) Useful life at 85 C and IR applied: 20 000 h0106 BCcomponents Revision: 14-Dec-20186 Document Number: 28384 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT 4 Table 5 Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations.

9 Also due to external factors, the lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCYFREQUENCY (Hz)501002004001000 2000IR PROCEDURES AND REQUIREMENTSTESTPROCEDURE(quick reference)REQUIREMENTSNAME OF TESTREFERENCEE nduranceIEC 60384-4 / EN 130300 subclause = 85 C; UR applied; 8000 h C/C: 15 %tan x spec. limitZ 2 x spec. limitIL5 spec. limitUseful lifeCECC 30301 subclause = 85 C; UR and IR applied; 20 000 h C/C: 45 %tan 3 x spec. limitZ 3 x spec. limit IL5 spec. limit no short or open circuit, no visible damage total failure percentage 1 %Shelf life (storage at high temperature)IEC 60384-4 / EN 130300 subclause = 85 C; no voltage applied; 500 hafter test: UR to be applied for 30 min, 24 h to 48 h before measurement C/C: 10 %tan x spec.

10 Limit IL5 2 x spec. limitLegal Disclaimer Revision: 08-Feb-171 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.