ANSI / ASME B16.11-2009 Forged Fittings, Socket-Welding ...
2. Threaded (NPT or PT Type), Socket-Weld, Butt-welding Size NPS 1/8”~4” DN 6~100 Rating Pressure Threaded End – 2000 / 3000 / 6000 LBS. Socket-weld End – 3000 / 6000 / 9000 LBS. Butt-weld End – SCH40 / SCH80 / SCH160 / XXS. Specifications 1. Dim. Spec. : ASME B16.11-2009 (Revision of ASME B16.11-2005) MSS – SP – 79, 83, 95, 97 ...
Tags:
Information
Domain:
Source:
Link to this page:
Please notify us if you found a problem with this document:
Documents from same domain
ANSI B16.9 standard is Factory-Made Wrought Steel Butt ...
thepipefitting.comANSI B16.9 standard is Factory-Made Wrought Steel Butt-welding Fittings. The B16.9 standard covers the information of general scope, pressure ratings, sizes, marking requirement, material, pipe fittings dimensions, butt welding ends preparation, design proof test, test and inspection for products, and the tolerance requirements.
Standard Marking System for Valves, Fittings, Flanges, and ...
thepipefitting.comMSS STANDARD PRACTICE SP-25 2 NOTES: (a) CWP (Cold Working Pressure) is the maximum pressure rating allowed under normal "ambient" temperature conditions, which are usually understood to be -20°F to 100°F (-29°C to 38°C), Certain "ambient temperature" standards and practices have a different range or are
ASTM-A403-A403M- Standard-Specification-for- Wrought ...
thepipefitting.com4.2 The steel shall be melted by one of the following ... 4.2.3 One of the former followed by vacuum or electroslag-consumable remelting. 4.3 If secondary melting is employed, the heat shall be defined as all ingots remelted from a primary heat. ... 5.4.1 Shall have all pipe welds made by mill or the fitting
Related documents
Concentric Reducer - Best Choice of Pipe Fittings, Steel ...
www.pipefittingweb.comButt Weld, Stainless Fittings, Steel Fittings, Weld Fittings, Pipe Fittings, Steel Pipe Fittings, Stainless Steel Fittings, Butt Weld Fittings, Carbon Steel Fittings, Stainless Steel Pipe Fittings, Elbow, Tee, Cross, Pipe Reducer, Pipe Cap, …
Fitting, Weld, Weld fittings, Butt, Butt weld, Butt weld fittings
Carbon Steel Butt Weld Fittings - Hayward Pipe
www.haywardpipe.comCarbon Steel Butt Weld Fittings Material: Carbon Steel Seamless ASTM A234 WPB Dimensions: Butt-welding fittings and butt-welding short radius elbows and returns purchased in accordance with this specification shall conform to the dimensions and tolerances given in the latest revision of ANSI B16.9 and B16.28, respectively.
Stainless Steel Pipe, Fittings & Flanges - Atlas Steels
atlassteels.com.auButt welding fittings can be supplied in either seamless or welded construction and are covered by specification ASTM A403M (or ASTM A815M for Duplex grades) and ASME B16.9. Screwed and Socket Weld Fittings Piping systems can be connected using screwed fittings – BSP threaded (“150lb”) low pressure fittings
SPECIFICATIONS FOR SPIRAL PIPE AND FITTINGS
www.smcduct.comSingle-Wall Fittings SMC spiral fittings are manufactured with an elbow lock seam, lap seam (i.e. stitch weld, riveted, tack weld or solid weld), standing seam or butt weld seam. These may be with or without duct sealant. All fittings can be manufactured with: • Complete Seal Spiral Pipe System – 6” to 24” Diameter (even sizes)
Gyrolok Fitting Locator 2 GYROLOK ® Tube Fittings
catalog.hoke.comGROLOK ® Tube Fittings Dimensions for reference only. Subject to change. CW Tube Socket Weld Connector fractional tube Page 31 LW Tube Socket Weld Elbow fractional tube Page 31 CBW Butt Weld Connector fractional or metric tube to pipe Page 32 LBW Butt Weld Elbow fractional or metric tube to pipe Page 32 R Reducer fractional or metric tube ...
Fitting, Weld, Locators, Butt, Gyrolok fitting locator 2 gyrolok, Gyrolok, Butt weld
Forged High Pressure Pipe Fittings
www.pipefittingweb.com2. Threaded (NPT or PT Type), Socket-Weld, Butt-welding Size NPS 1/8”~4” DN 6~100 Rating Pressure Threaded End – 2000 / 3000 / 6000 LBS. Socket-weld End – 3000 / 6000 / 9000 LBS. Butt-weld End – SCH40 / SCH80 / SCH160 / XXS. Specifications 1. Dim. Spec. : ASME B16.11-2009 (Revision of ASME B16.11-2005) MSS – SP – 79, 83, 95, 97 ...
Introduction To TIG Welding - Weldability | Sif
www.weldability-sif.comweld without a crater at the end of the molten pool, an electronic timer gradually reduces the output from welding ... * Improved consistency in the under head of unbacked butt welds. * The ability to overcome differences in heat sink and therefore to join thick to thin material. ... type TIG adaptor if output fittings are dinse type sockets.
SAE HYDRAULIC 4-BOLT AND SPLIT FLANGED FITTINGS
www.hydraquip.comnptf thread quick selection guide sae hydrualic 4 bolt and split flanged fittings o-ring pressure rating flat face w43 code 61 w104 w44 code 62 w45 deep socket weld pipe o-ring pressure rating flat face w31 code 61 w3 w81 code 62 w80 butt weld code 61 o-ring pressure rating flat face w35 sch.40 w34 w24 sch.80 w23 w27 sch.160 w25 sae straight ...
Springless Diaphragm Valves - Swagelok
www.swagelok.comIntegral Male VCR Fittings Tube Butt Weld Ends Pneumatic Actuator Low-Pressure Valves Round Handle Directional Handle DP Series Low-pressure Female VCR with Locking Handle, locked position MS-01-165 N-ELD-0666 4.07 (103) closed and locked Female VCR Fittings DP Series Low-pressure Female VCR with Locking Handle, open position MS-01-165 N-ELD ...
Fitting, Valves, Diaphragm, Weld, Swagelok, Butt, Butt weld, Springless diaphragm valves, Springless
Weld Fittings, Ultrahigh-Purity, Specially Cleaned, and ...
www.swagelok.comWeld Fittings—Ultrahigh-Purity, Specially Cleaned, and Industrial 3 WELD FITTINGS Compact Design damage to other components during Accommodates tubing systems requiring miniaturization Allows close component spacing Provides flow and service ratings equal to larger weld fittings . Ordering Information and Dimensions