ArcGIS Pro shortcuts: Application and map navigation

1 Copyright 2019 Esri. All rights reserved. G526942 For a complete list of ArcGIS Pro shortcuts, see Explore tool activatedZoom in by drawing a rectangleShift + dragCenter and zoom in on pointer locationShift + click Center on pointer locationCtrl + clickRotate clockwiseA; V + Right Arrow keyRotate counterclockwiseD; V + Left Arrow keyIn a scene, look straight down (perpendicular)PIn a scene, tilt camera upWIn a scene, tilt camera downSGeneral applicationOpen ProjectCtrl + ONew ProjectCtrl + NSave ProjectCtrl + SExitAlt + F4 Show/Hide ribbonCtrl + F1 CopyCtrl + CCutCtrl + XPasteCtrl + VUndoCtrl + ZRedoCtrl + YDeleteDeleteEnable access keys and show KeyTips on the ribbonAlt; F10 Move through tabs on the ribbon or in a paneRight and Left Arrow keysMove through commands on the ribbon, pane, view, or dialog boxTab; Shift + TabMove through elements in a listUp and Down Arrow keysExpand a drop-down menu or listAlt + Down Arrow keyCollapse a drop-down menu or listEscExecute a commandEnter; SpacebarOpen a context menuShift + F10; Windows Menu keyMove between the ribbon and an active view or paneF10 Choose a view or pane to activate from a listCtrl + Tab; Alt + F7 Change the active view Ctrl + F6 Close a viewCtrl + F4 Task sRun a stepAlt + XContinue to next stepAlt + CSkip Alt + SMap navigationRegardless of active toolZoom to full extentInsertZoom out incrementallyMinus key (-)Zoom in incrementallyPlus key (+)Navigate with the Explore tool while using another toolHold C Zoom to layer's extentAlt + click layer(s) in Contents paneZoom continuouslyZ + drag; Right-click and dragZoom out incrementallyX + click Rotate about the center of the viewV + dragIn a scene, look aroundB + drag.

2 B + arrow keysGo to the previous extent<Go to the next extent>Roam (pan in the direction of the pointer)Hold QDecrease roam speedQ + ShiftIncrease roam speedQ + CtrlNudge the viewArrow keysIn a map, zoom out incrementally; or in a scene, move camera upUIn a map, zoom in incrementally; or in a scene, move camera downJJump one screen size upPage UpJump one screen size downPage DownJump one screen size to the leftHomeJump one screen size to the rightEndCancel map drawingEscRefresh map viewF5 Using selection toolsToggle Intersect and Within selection modesYSpecify a radius when selecting by circleRArcGIS Pro shortcuts: Application and map navigationTableOpen the table of the layer or table selected in the Contents paneCtrl + T; Ctrl + double-click a layer or table nameClose the active tableCtrl + F4 Select all recordsCtrl + A; Shift + click upper left cellSelect a row or clear the selectionCtrl + SpacebarMove to the next record and select it exclusivelyCtrl + EnterSwitch the selectionCtrl + U; Ctrl + click upper left cellContinuously select recordsShift + Down Arrow key; Shift + Up Arrow keyClear the selectionCtrl + Shift + ASelect the previous row in the same columnShift + EnterZoom the view to selected featuresCtrl + Shift + =Zoom the view to current featureCtrl + =Flash the active feature in the viewCtrl + 8 Zoom to and select the featureDouble-click gray cell to the left of a recordPan to and select the featureCtrl + double-click the gray cell to the left of a recordGo to the next columnTabGo to the previous columnShift + TabGo to the next rowEnterGo to the first cell in a rowHome; Ctrl + Left Arrow keyGo to the first cell in the first rowCtrl + HomeGo to the last cell in a rowEnd.

3 Ctrl + Right Arrow keyGo to the last cell of the last rowCtrl + EndGo to the cell in the direction of the arrow keyArrow keysGo to the first row in the current columnCtrl + Up Arrow keyGo to the last row in the current columnCtrl + Down Arrow keyIncrease or decrease the scale of the tableCtrl + Mouse wheelReset the table scale to 100 percentCtrl + 0 (zero)Scroll the table window horizontallyShift + Mouse wheelRemove field sortingCtrl + Shift + UOpen the Custom Sort dialog boxCtrl + Shift + SHide the fieldCtrl + double-click Open the current feature 's pop-upCtrl + ISwitch between showing field names and aliasesCtrl + Shift + N Contents paneReturn keyboard focus to the map view from the Contents paneEscContract selected itemsMinus key (-); Left Arrow keyExpand selected itemsPlus key (+); Right Arrow keyExpand or contract all items on that hierarchical levelCtrl + click an expansion control; Ctrl + Plus key (+) or Minus key (-); Ctrl + Left or Right Arrow keyExpand or contract all items on all levelsCtrl + Shift + click an expansion control; Ctrl + Shift + Plus key (+) or Minus key (-); Ctrl + Shift + Left or Right Arrow keyTurn selected layers on or offSpacebarTurn on or off all layers when a single layer is selectedCtrl + SpacebarTurn on or off all layers at that hierarchical levelCtrl + click a check boxTurn on or off all layers at all hierarchical levelsCtrl + Shift + click a check boxRename the selected itemF2 Open the Properties dialog box for a selected itemF12; EnterSelect multiple layers in the Contents paneCtrl + click; Shift + click; Ctrl + Up and Down Arrow keys.

4 Shift + Up and Down Arrow keysLock or unlock the item selected in the Contents pane (layout only)Ctrl + LLock or unlock all items on the same hierarchical level in the Contents pane (layout only)Ctrl + Shift + LZoom to the extent of that layerAlt + click a layer nameDelete the item selected in the Contents paneDelete Editing TablesCopy the value in the cellCtrl + C; Ctrl + InsertCopy the selected recordsCtrl + Shift + CEdit the contents of a cellF2 Apply the current editEnterCancel what has been edited in the cell and restore the original valueEscInsert a new line Shift + EnterLayoutNavigate the layout while a map frame is activatedHold 1 Select all the elements on the page and in the Contents paneCtrl + AClear the selection of all the elements on the page and in the Contents paneCtrl + BackspaceContinuously select elementsShift + Down Arrow key; Shift + Up Arrow keyDelete the selected elementsDeleteCopy the selected elementCtrl + CCut the selected elementCtrl + XPaste the contents of the clipboardCtrl + VSwitch the visibility of the selected elementsSpacebarNudge selected elements 1/10 of the current page unitShift + arrow keysNudge selected elements 1/100 of the current page unitCtrl + arrow keysPan in the direction of the arrow keyArrow keysZoom to the full pageInsertLock or unlock the layout item selected in the Contents paneCtrl + LLock or unlock all items on the same hierarchical level in the Contents paneCtrl + Shift + LArcGIS Pro shortcuts.

5 Contents pane, layouts, and tablesCreate a circleSpecify absolute x,y,zF6 Specify radiusRCreate an ellipseSpecify absolute x,y,zF6 Specify directionAConstrain to circleShiftCreate a rectangleSpecify absolute x,y,zF6 Specify directionAConstrain to squareShiftTopology error inspectorMove cursorUp and Down Arrow keysZoom to current errorZ; SpacebarSelect parent features causing errorFShow topology ruleDMark error as exceptionXClear current exceptionEEdit tablesCopy the value in the cellCtrl + C; Ctrl + InsertCopy the selected recordsCtrl + Shift + CEdit the contents of a cellF2 Apply the current editEnterCancel what has been edited in the cell and restore the original valueEscInsert a new line Shift + EnterEdit verticesIn a 3D scene, change elevation of z-enabled vertexH + dragMove Bezier handle that is overlapping a vertexCtrl + dragMove Bezier segmentCtrl + dragCreate a new vertex on a segment A + clickDelete vertexD + clickGeneral editingPanC + dragZoom outX + dragZoom inZ + dragShow vertices of features near the pointerHold TTemporarily toggle snappingHold SpacebarCancel an unfinished editEsc.

6 Ctrl + DeleteFinish current edit to a new or existing featureF2 UndoCtrl + ZRedoCtrl + YDeactivate current toolEscFormat textUnderlineCtrl + UAll capsCtrl + Shift + ALowercaseCtrl + Shift + KSuperscriptCtrl + Shift + Plus key (+)SubscriptCtrl + = Selection toolsAdd to selectionShift + click Remove from selectionCtrl + clickSelect only this featureCtrl + Shift + clickMoveMove anchor; if anchor is offscreen, place anchor at click locationCtrl + click ScaleOpen Scale dialog boxFToggle secondary anchorSMove anchor; if anchor is offscreen, place anchor at click locationCtrl + click RotateOpen Angle dialog boxAToggle secondary anchorSMove anchor; if anchor is offscreen, place anchor at click locationCtrl + click Create annotationFind text (replace text string with label expression or field value)Ctrl + WNext (step through selection when using Find text)NSpecify absolute x,y,zF6 Create point featuresSpecify absolute x,y,zF6 Create polyline and polygon featuresSpecify absolute x,y,zF6 Specify directionASpecify distanceDSpecify direction and distanceGSpecify deflection angleFSpecify segment deflectionF7 Constrain segments parallel to an existing segment you're pointing toPConstrain segments perpendicular to an existing segment you're pointing toECancel an unfinished editEsc; Ctrl + DeleteSquare and finishF3 Finish partF4.

7 Shift + double-clickTemporarily toggle snappingHold SpacebarCreate arc segmentsSpecify radiusRCreate endpoint arc segmentsSpecify radiusRCreate by tracingOpen Options dialog boxOSwitch side of offsetTabTrace only selected featuresCtrlStreamingOpen Options dialog boxOToggle streamingF8 ArcGIS Pro shortcuts: EditingCopyright 2019 Esri. All rights reserved. G526942 For a complete list of ArcGIS Pro shortcuts, see map navigationDecelerated change in x,yCaps Lock + move pointerAccelerated change in x,yShift + move pointerRoam (pan in the direction of the pointer)Hold QZoom inPlus key (+); Ctrl + rotate mouse wheelZoom outMinus (-); Ctrl + rotate mouse wheelChange z-valueZ + move pointer horizontally; Rotate mouse wheelAccelerated change in zShift + Z + move pointer horizontally; Shift + rotate mouse wheelDecelerated change in zCaps Lock + Z + move pointer horizontally; Caps Lock + rotate mouse wheelToggle surface snappingBToggle terrain followingTSwitch between roaming cursor mode and fixed cursor modeF8 Temporarily turn off fixed cursor mode~ Adjust x-parallaxCtrl + Left or Right Arrow keyAdjust y-parallaxCtrl + Up or Down Arrow keyReturn to default parallaxCtrl + F7 Set source as best modelMPan to center of stereo pairEOpen Overview windowOOpen magnifier windowWGeoreferencingToggle visibility of georeferencing layerLToggle visibility of control point ScreenTipHSpecify value for Move, Scale, or RotateACancel creation of a control pointEscTemporarily disable snappingHold SpacebarRefresh Control Point tableF5 Orthomapping (GCP Manager)Refresh GCP list in GCP ManagerF5 Toggle Dynamic Range AdjustmentCtrl + DToggle GCP displayCtrl + GZoom to full extentCtrl + FPixel editorToggle visibility of operational layerLRefresh Edits LogF5 ArcGIS Pro shortcuts.

8 Raster and imagerySelected Line of Sight observer or targetSelected view domeSelected viewshedSelected sliceWN/AN/ATilt observer upRotate plane heading forwardARotate counterclockwiseN/ARotate observer heading leftRotate plane heading leftSN/AN/ATilt observer downRotate plane heading backwardDRotate clockwiseN/ARotate observer heading rightRotate plane heading rightCtrl + Up Arrow keyMove observer away from scene cameraMove view dome away from cameraMove observer forwardMove plane forwardCtrl + Down Arrow keyMove observer toward scene cameraMove view dome toward cameraMove observer backwardMove plane backwardCtrl + Right Arrow keyMove observer right, perpendicular to scene camera headingMove view dome right, perpendicular to scene camera headingMove viewshed right, perpendicular to the observer headingMove slice rightCtrl + Left Arrow keyMove observer left, perpendicular to scene camera headingMove view dome left, perpendicular to scene camera headingMove viewshed left, perpendicular to the observer headingMove slice leftCtrl + Shift + Up Arrow keyMove observer and all its targets away from scene cameraN/AN/AN/ACtrl + Shift + Down Arrow keyMove observer and all its targets toward scene cameraN/AN/AN/ACtrl + Shift + Right Arrow keyMove observer and all its targets right, perpendicular to scene camera headingN/AN/AN/ACtrl + Shift + Left Arrow keyMove observer and all its targets left.

9 Perpendicular to scene camera headingN/AN/AN/ACtrl + UIncrease observer elevationIncrease view dome elevationIncrease observer elevationIncrease plane elevationCtrl + JDecrease observer elevationDecrease view dome elevationDecrease observer elevationDecrease plane elevationCTurn the Explore tool on and off to navigateTurn the Explore tool on and off to navigateTurn the Explore tool on and off to navigateTurn the Explore tool on and off to navigateDeleteDelete the observer and all associated targetsDelete the selected view domeDelete the selected viewshedDelete the selected sliceArcGIS Pro shortcuts: Exploratory analysisToolShortcutCopyright 2019 Esri. All rights reserved. G526942 For a complete list of ArcGIS Pro shortcuts, see Play/PauseSpacebarNext keyframeCtrl + Right Arrow keyPrevious keyframeCtrl + Left Arrow keyAppend: Add a new keyframe using the selected transition type at the current viewCtrl + InsertInsert a keyframe at the current time or update a keyframe if one exists at the current timeShift + InsertDelete the current keyframeCtrl + Shift + DeleteRange slider Play/PauseCtrl + Shift + SpacebarNext stepCtrl + Shift + Up Arrow keyPrevious stepCtrl + Shift + Down Arrow keyTime sliderPlay/PauseCtrl + SpacebarNext stepCtrl + Shift + Right Arrow keyPrevious stepCtrl + Shift + Left Arrow keyArcGIS Pro shortcuts: Animation, time, and rang