Cemented Leaded Wirewound Resistors - Vishay …

1 AC, Draloric Revision: 07-Jun-171 Document Number: 28730 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT Leaded Wirewound ResistorsThe AC series is the perfect choice for general purpose power applications. The AEC-Q200 qualified AC-AT series is best suited for automotive applications. The robust silicon cement coating can handle challenging ambient and operating conditions. Typical applications include but are not limited to energy meters, power supplies and automotive electronics. For a given application, requirements of ohmic value, rated power, peak voltage, pulse shape, pulse duration, lead bending, and environmental conditions may be submitted to recommend the most suitable product.

2 Various lead forms are available such as RT (radial taped), WSZ (Z-form), DK (double kink), EK (single kink) with defined mounting AEC-Q200 qualified AC-AT series High power dissipation in small design Non-flammable coating conforming to UL 94 V-0 Excellent pulse load capability Non-inductive (NI) version available WSZ-form lead bending available for SMD mounting Material categorization: for definitions of compliance please see Automotive electronics Industrial electronics Power supplies White goods Pre-charged applicationsNotes The operating temperature range for these Resistors is from -55 C up to 250 C(1)Resistance value to be selected for 5 % from E24(2)AC03 WSZ: P40 C = W; P70 C = WSTANDARD ELECTRICAL (1)TCR =-10 ppm/K to-80 ppm/KRESISTANCERANGE (1)TCR =+100 ppm/K to+180 ppm/KRESISTANCERANGE (1)TCR = 100 ppm/KRESISTANCETOLERANCEAC01, AC01-AT 1 to 33 36 to k - 5 %AC03, AC03-AT (2)3 to 390 430 to k k to k 5 %AC04, AC04-AT4 to 620 680 to k - 5 %AC05, AC05-AT5 to 910 k to 10 k - 5 %AC07, AC07-AT7 to k k to 15 k - 5 %AC10, AC10-AT10 to 560 620 to 27 k - 5 %P x RP x RP x RP x RP x RP x RAC, Draloric Revision: 07-Jun-172 Document Number: 28730 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

3 THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT (1)For special windings or the non-inductive versions, please contact: NUMBER AND PRODUCT DESCRIPTIONPart Number: AC03000001509 JAC00 AC03AT0001509 JAC00 MODELVARIANTTCR / MATERIALVALUETOLERANCECODEPACKAGINGCODES PECIALAC01000 = AC01AC03000 = AC03AC04000 = AC04AC05000 = AC05AC07000 = AC07AC10000 = AC10AC01AT0 = AC01-ATAC03AT0 = AC03-ATAC04AT0 = AC04-ATAC05AT0 = AC05-ATAC07AT0 = AC07-ATAC10AT0 = AC10-AT0 = neutral1 = RT2 = SWI3 = DK SP 20 mm4 = DK LP 33 mm 5 = DK LP mm6 = NI Non inductive 7 = DK LP mm9 = WSZ 67208 = DK SP mmZ = Value overflowA = EK mmB = EK mmC = EK mmD = Cu wire mmE = EK 33 mmF = EK mmG = DK SP 33 mmH = EK 20 mm0 = standard3 digit value1 digitmultiplierMULTIPLIER7 = *10-38 = *10-29 = *10-10 = *1001 = *1012 = *102J = %(see Packaging table)00 = standard2 digit code = customized version (1) Product Description.

4 AC03 15R 5 % AC AC03AT 15R 5 % ACAC0315R5 %ACAC03-AT15R5 %ACTYPERESISTANCETOLERANCEPACKAGINGAC01 AC01-ATAC03 AC03-ATAC04 AC04-ATAC05 AC05-ATAC07 AC07-ATAC10 AC10-ATR10 = 75R = 75 27K = 27 k 5 % AC LB A1 LC AB LK AE BM3AT00150C09JA00A0C30000150C09JA00A0 CAC, Draloric Revision: 07-Jun-173 Document Number: 28730 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT (1) Manufacturing at different production locations may involve use of differently sized boxPACKAGINGTYPE / SIZECODE DESCRIPTION QUANTITYPACKAGING STYLEWIDTHPITCHDIMENSIONSAC01 AC01-ATA1A11000 Taped acc. to IEC 60286-1fan-folded in a box63 mm10 mm260 mm x 85 mm x 70 mmAC01 DK/EK AC01-AT DK/EKLCLC500 Bulk packaging--260 mm x 80 mm x 55 mmAC01 RT AC01-AT RTAERE2500 Taped acc.

5 To IEC 60286-2fan-folded in a mm200 mm x 46 mm x 334 mmAC03 AC03-ATACAC500 Taped acc. to IEC 60286-1fan-folded in a box 63 mm10 mm260 mm x 85 mm x 58 mmAC03 DK/EK AC03-AT DK/EKLCLC500 Bulk packaging--224 mm x 82 mm x 54 mmAC03 RT AC03-AT RTAQAQ1800 Taped acc. to IEC 60286-2fan-folded in a mm200 mm x 46 mm x 334 mmAC03 WSZ AC03-AT WSZBMBM1250 Blister taped acc. toIEC 60286-3 in a box-8 mm 350 mm x 350 mm x 55 mmAC04 (1) AC04-AT (1)ACAC500 Taped acc. to IEC 60286-1fan-folded in a box63 mm10 mm260 mm x 85 mm x 70 mm260 mm x 85 mm x 58 mmAC04 DK/EK AC04-AT DK/EKLCLC500 Bulk mm224 mm x 82 mm x 54 mmAC05 AC05-ATACAC500 Taped acc. to IEC 60286-1fan-folded in a box63 mm5 mm270 mm x 86 mm x 118 mmAC05 DK/EK AC05-AT DK/EKLCLC500 Bulk packaging--224 mm x 82 mm x 54 mmAC07 AC07-ATACAC500 Taped acc. to IEC 60286-1fan-folded in a box73 mm10 mm26 mm x 90 mm x 118 mmAC07 DK/EK AC07-AT DK/EKLBLB250 Bulk packaging--224 mm x 82 mm x 54 mmAC10 AC10-ATABAB250 Taped acc.

6 To IEC 60286-1fan-folded in a box88 mm10 mm265 mm x 105 mm x 105 mmAC, Draloric Revision: 07-Jun-174 Document Number: 28730 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT Resistors are best suited for use in high power, high current applications. The silicon cement lacquer coating enables AC series to withstand challenging operating and environmental conditions. The coating is resistant to cleaning solvents specified in IEC 60115-1 (1). Production is strictly controlled and follows an extensive set of instructions established for winding is done with a specific material on a specially developed fine ceramic body (Al2O3). The ceramic meets the highest requirements against mechanical resistance, thermal shocks, dielectric strength, and insulation resistance at high temperatures.

7 With different diameters and turn spacings of resistive wire, a large ohmic value range can be Resistors are marked with resistance, rated dissipation (P40) and tolerance. Product quality is verified by testing procedures, performed on all individual Resistors . Resistance is measured on the lead wires at a distance of 6 mm from the resistor body. If a greater length of lead wire is used in the application, the user may need to consider the additional wire resistance, particularly with low resistance acknowledges the following systems for the regulation of hazardous substances: IEC 62474, Material Declaration for Products of and for the Electrotechnical Industry, with the list of declarable substances given therein (2) The Global Automotive Declarable Substance List (GADSL) (3) The REACH regulation (1907/2006/EC) and the related list of substances with very high concern (SVHC) (4) for its supply chainThe products do not contain any of the banned substances as per IEC 62474, GADSL, or the SVHC list, see Hence the products fully comply with the following directives.

8 2000/53/EC End-of-Life Vehicle Directive (ELV) and Annex II (ELV II) 2011/65/EU Restriction of the Use of Hazardous Substances Directive (RoHS) with amendment 2015/863/EU 2012/19/EU Waste Electrical and Electronic Equipment Directive (WEEE) Vishay pursues the elimination of conflict minerals from its supply chain, see the Conflict Minerals Policy at Resistors are axial Leaded for soldering. The terminals of the Resistors are completely lead (Pb)-free, the special tin plating provides compatibility with lead (Pb)-free and lead-containing soldering lead forms may be available on request, please inquire at These components are high dissipation power Resistors , customers are advised to use a high melting point INFORMATIONThe power dissipation of the resistor generates a temperature rise with respect to the ambient.

9 The permissible dissipation is derated for temperatures above 40 C, as shown in the derating diagram, in order to avoid overheating of the resistor. The heat dissipated from the resistor may affect adjacent components, hence proper clearance will be required in order to avoid overheating. The resistive wire is encapsulated by a protective lacquer coating. All materials used are non-flammable and inorganic. These Resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional AC-AT series is AEC-Q200 qualified, specifically for use in automotive PRODUCTSUL approved, special cement coated fusible resistor is also available.

10 For details please see the datasheet: AC01-CS, AC03-CS, AC05-CS - Axial Cemented Fusible Wirewound Safety Resistors high surge Wirewound products, silicon cement coated Z300-Cxx series is available, see the datasheet: Z300-Cxx - High Surge Axial Cemented Wirewound Resistors precision applications, cement coated PAC series is available, see the datasheet: PAC Series - Cemented Wirewound Precision Resistors Notes(1)Other cleaning solvents with aggressive chemicals should be evaluated in actual cleaning process for their suitability(2)The IEC 62474 list of declarable substances is maintained in a dedicated database, which is available at (3)The Global Automotive Declarable Substance List (GADSL) is maintained by the American Chemistry Council and available at (4)The SVHC list is maintained by the European Chemical Agency (ECHA) and available at , Draloric Revision: 07-Jun-175 Document Number: 28730 For technical questions, contact: DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.