DATA SHEET Ruckus ICX 7150 - CommScope

1 Stackability Simplifies Management Class-leading stacking scalability with up to 12 switches per stack Long-distance stacking up to 10 km using standard optics or cables10 GbE ports Optimize Network Performance Up to 8 10 GbE SFP+ ports for stacking or uplinksDual Power Supplies for High Availability Dual load-sharing, hot-swappable power supplies available on the Z-Series switchMultigigabit Support Enables Next Generation Wireless Deployment Up to 16x and 2x GbE ports optimized for Wi-Fi 5 and 6 deployment1 Up to 90W per port, IEEE standard pending ratification. Compatible with leading PoE Budget to Power Advanced Edge Devices PoE+/ budget (up to 1,480 watts)

2 1 Support advanced wireless APs and video surveillance equipment Silent Operation for Deployment in the Work Environment Fanless design or fanless mode enables silent non-disruptive deployment anywhereAdvanced L3 Maximizes Flexibility OSPF, VRRP, PIM, PBR L3 featuresCampus Fabric Reduces Cost of Operations, Increases Flexibility Ruckus Campus Fabric delivers the benefits of a chassis with the flexibility of stackables Scales to over 1800 portsEntry-Level Access switch Series Delivers Unprecedented Performance and Features in Its Class The Ruckus ICX 7150 series of stackable switches delivers the performance, flexibility, and scalability required for enterprise access deployment, raising the bar with non-blocking performance and up to 8x10 GbE ports for uplinks or stacking.

3 It offers seamless interoperability with Ruckus wireless products to deliver unified wired and wireless network access. In addition, Ruckus Multigigabit ethernet technology offers bandwidth speeds needed to optimize performance of the latest generation high performance wireless access points and edge devices, over standard ethernet SHEETRUCKUS ICX 7150 Enterprise-Class Stackable Access Switch2 Ruckus ICX 7150 | Enterprise-Class Stackable Access SwitchThe Ruckus ICX 7150 series of switches are available in three formats:Stacking Across the ICX 7150 Series Ruckus stacking technology makes it possible to stack up to twelve Ruckus ICX 7150 switches into a single logical switch .

4 This allows the Ruckus ICX 7150 to deliver a class-leading 480 Gbps of aggregated stacking bandwidth and offer simple and robust expandability for future growth. Stacking is supported across the ICX 7150 series and all ICX 7150 models including the ICX 7150 compact switches and the ICX 7150-48ZP can be mixed within the same stack. This stacked switch has only a single IP address that simplifies management and offers transparent forwarding across up to 600 1 GbE ports or up to 192 GbE ports , and up to 96 10 GbE ports . When new switches join the stack, they automatically inherit the stack s existing configuration file, enabling a plug-and-play network the ICX 7150-48ZP switch has twice as many uplink ports , when it is added to a stack of other ICX 7150 switch models, the effective bandwidth of all the switches is doubled.

5 By designing the stack this way, all four of the 10 GbE ports on the ICX 7150 switches can be used for stacking (rather than having to split the four ports between stacking and uplinks), and leveraging four of the 10 GbE ports on the ICX 7150-48ZP for stacking and the other four 10 GbE ports can be used for AvailabilityThe Ruckus ICX 7150 Switches help deliver continuous availability to optimize the user experience. Ruckus stacking technology provides high availability by performing real-time state synchronization across the stack and transferring switch management control from the master stack controller to the standby controller if the master stack controller experiences a failure.

6 When hot-inserting or hot-removing a stack member to increase capacity or perform service upgrade, traffic flows will not experience addition to stack-level high availability, Ruckus ICX 7150 Switches also support stack level ISSU (In Service Software Upgrade), a unique capability that allows the user to perform software upgrades to a Ruckus ICX 7150 stack without service interruption. Taking high-availability and reliability even further, the Ruckus ICX 7150 Z-Series switch offers redundant hot swappable load sharing power supplies and up to 2 hot swappable ICX 7150 SwitchesThe standard Ruckus ICX 7150 switches are available in 24-, and 48-port 10/100/1000 Mbps models with four 1/10 GbE dual-purpose uplink/stacking ports .

7 These switches are available with or without PoE+ power. Silent operation is available for out-of-closet ICX 7150 Z-Series SwitchThe Ruckus ICX 7150-48ZP 48-port switch adds higher performance, greater resiliency and increased PoE power. The switch offers Multigigabit technology (IEEE ) to match the highest performing Wave 2 wireless access points available, with dual redundant, hot-swappable power supplies and fans, and up to 8x10 GbE uplink/stacking switch offers 16 Multigigabit (100 Mbps/1 ) ports , each with Power-over-HDBaseT (PoH) up to 90 watts and ready, plus 32 10/100/1000 Mbps ports with PoE+. With a maximum PoE budget of 1480 watts, this switch delivers the power, and performance, to drive PoE+ power to all 48 ICX 7150 Compact SwitchesThe Ruckus ICX 7150 compact switches come in 8, 10 and 12 ports models and feature a fanless design to operate silently in out-of-closet environments such as offices, classrooms, and retail spaces.

8 They offer PoE on all ports . The ICX 7150-C10ZP delivers up to 90W per port of PoE power and multigigabit ethernet at Gbps speeds. With 2x1/10 GbE uplink/stacking ports , the ICX 7150-C12P and C10ZP deliver high performance in a small package. 3 Ruckus ICX 7150 | Enterprise-Class Stackable Access SwitchSilent Operation The Ruckus ICX 7150 compact switches, along with the Ruckus ICX 7150-24 and the ICX 7150-48 switches, feature a fanless design that enables it to operate Ruckus ICX 7150-24P and the ICX 7150-48P offer a silent mode configuration option, enabling these switches to operate with the fan disabled while providing a PoE budget of 150 watts.

9 This Ruckus -exclusive feature enables users in hospitality, education, healthcare, and retail industries to deploy these switches outside of the wiring closet without disrupting the work environment. Multigigabit ethernet SupportThe Ruckus ICX 7150-48ZP switch raises the bar for entry-level switches even further with 16x IEEE compliant GbE ports , up to 8 10 GbE uplink ports , dual redundant load sharing power supplies and class-leading stacking density with up to 12 switches per stack. The ICX 7150-C10ZP delivers multigigabit speeds in a compact form factor with support for and 10 Gbps. Both switches stack with all other members of the ICX 7150 series allowing organizations to buy what they need now and easily scale as the need for Multigigabit support emerges.

10 It is designed to work seamlessly with Ruckus wireless access points to deliver unified wired and wireless network Effective Fiber Switching Solution The Ruckus ICX 7150-24F fiber switch delivers 24 SFP 1 GbE fiber ports for fiber-to-the room deployment scenarios when fiber ports are needed at the edge of the network. It offers 4x10 GbE SFP+ for uplink or stacking with the rest of the ICX 7150 series. With the ICX 7150-24F, Ruckus offers a complete set of fiber switching and routing solutions for every budget from high-end core and aggregation to entry-level access Next-Generation Edge Devices All ICX 7150 series members offer PoE options.