DIN FLANGED BALL VALVES - Documents | Metso

1 B107-4EN 11/2012 DIN FLANGED ball VALVESFULL BORE: DN 15 150 PN 16 PN 40 SERIES 9000 ( 916D, 940D)The jamesbury polymeric-seated FLANGED ball valvesfeature a flexible-lip seat design that provides positivebi-directional shut-off for a variety of applications inindustries ranging from chemical and petrochemical torefining, pulp and paper, and FLANGED ball VALVES are available insizes (DN 15 150) in both full-bore and standard-bore designs that fully conform to ISO 17292 choice of body, trim, and seat materials is availableto suit an extensive range of applications. As anoption, VALVES can be prepared for special services,such as chlorine, oxygen, high-vacuum, hydrogenperoxide or ValvesStandard body and trim materials for Fire-Titevalvesare carbon steel with 316 stainless steel trim and all316 stainless steel.

2 Seat material options includeXtreme (X) for applications involving chemicals,petrochemicals, acids, caustics, and MarkedAll VALVES larger than DN25 are CE marked and docu-mented to meet the European Pressure EquipmentDirective (PED) 97/23/EC. CE marked products alsomeet the requirements of BS 5351, including AND BENEFITS Xtremeseat provides longer life, expanded perform-ance boundaries, and greater value. Polymeric flexible lip-seat design offers tight shut-offin either direction and extended cycle life withminimummaintenance. Fire-Titeversion with non-metallic seats meets API607 and ISO 10497 requirements.

3 Superior control characteristics, coupled with tightshut-off capabilities, make these VALVES ideal for avariety of on-off and control applications. API 608 compliance to serve refineries and relatedchemical and petrochemical industries. NACE MR0103 compliance available. Meets 21 standard and 12 optional industry standardsand specifications. Face to face dimensions according to ISO FEATURES AND BENEFITSFor DN 15 through DN150 Series 9000 New patented stem seal system is live loaded andengineered to assure long sealing life on sizes up toDN40. ISO 5211 Bonnet for global conformity on sizes upto DN40.

4 New stainless steel linkage for VPVL, V-Series andADC-Series actuators has a guided coupling to aligntopworks during assembly and eliminate side loadstress on stem seals for long life, clean environmentand reduced Responsibility VALVES , actuators and accessories may be purchasedcompletely mounted from one BULLETIN 11/122 METSOB107-4 ENFlow DataThe table at right provides flow coefficients for Jamesburyvalves covered in this bulletin. Kvvalues represent the flowof water at 16 C through the valve in cubic meters perhour at a pressure drop of 1 kg/cm2. To convert Kvto Cv,divide by Body RatingsThese are the maximum working pressure ratings of thevalve body only.

5 The seat ratings, shown on the next page,determine the practical pressure limitations according toactual service conditions. Test pressures are recommendedpressures for hydrostatic test with ball half Seat RatingsValve SizeKvDNFull Bore158204325864023050420809901001885150 4370 Maximum Working Pressure, barPN16PN40 Temp CCarbon 316 StainlessCarbon316 Stainlesssteelsteelsteelsteel-29 to Pressure24236056 Seat ratings, indicated by solid lines in the charts on thenext page, are based on differential pressure with the valveball in the fully closed position and refer to seats only. Thedotted lines indicate maximum working pressures for WCBcarbon steelvalve bodies.

6 (Maximum working pressures ofother body materials are shown in the tables above.) Thecombination of dotted and solid lines indicates themaximum valve rating at specific pressure and temperatureconditions. VALVES with Xtremeseats can be used in serviceto -51 C provided that the valve body material is suitablefor such a temperature. Carbon steel VALVES are rated to -29 saturated steam service, stainless steel trim is recom-mended at all pressures and is required above 14 Bulletin B150-1. For more application information onseat materials, refer to Bulletin and ValueXtremeseats provide longer life, expanded performanceboundaries, and the greatest possible aunique material that resulted from a technological break-through in our polymer research lab.

7 The material is a fluoro-polymer-based blend proprietary to Jamesburythat provides superior quarter-turn BULLETIN 11/123 DIN FLANGED ball VALVES CLASS PN16 PN40B107-4 ENLEGENDX = XtremeXDN 15 40 Full BoreDN 50 100 Full BoreDN 150 PN16 Full Bore Non-TrunnionTrunnion ValvesDN 150 PN40 Full BoreMaximum Differential Pressure, barTemperature C50454035302520151050-50 0 50 100 150 200 250 300 350PN16PN40 Maximum Differential Pressure, barTemperature C50454035302520151050-50 0 50 100 150 200 250 300 350 Maximum Differential Pressure, barTemperature C50454035302520151050-50 0 50 100 150 200 250 300 Maximum Differential Pressure, barTemperature C20151050-50 0 50 100 150 200 250 300 350 Low Temperature Limitfor Carbon Steel (WCB)Saturated SteamPN40 XPN16 XPN40PN16 XSaturated SteamPN16 Saturated SteamSaturated SteamTECHNICAL BULLETIN 11/124 METSOB107-4 ENValves combined with Jamesburyactuators offer a totalvalue and performance package.

8 Available with pneumat-ic Valv-Powr VPVL actuators, V-Series, ADC-Series,LCU-Series, and LCR-Series electric actuators and withAutomation Performance and ValueStoneL Quartz , Eclipse , and Hawkeye digital monitorsor VCTs, the packages have a wide range of our website The Ultimate Process Automation Package for VPVL Pneumatic Actuators, V-Series and ADC-Series Electric ActuatorsFor DN 15 40 Full Port Series 9000 Fully guided stem, couplingand precision bracketassures optimum form, fitand performanceCompression plate and discsprings for high cycle thermaland pressure stem seal (#7017915) has3 engineered sealing zones toprovide multiple barriers forlong term for general purposeand hazardous duty serviceDigital valve communication terminalsfor full automation capability13217-4PH SS coupling forstrength and corrosionresistanceCast 300 Series SS bracketsfor corrosion resistanceDIMENSIONSDN 15 40, Series 916D and 940D4 Holes Lon a MBolt CircleSAJ CKHGF R E Port DBolt CircleTyp.

9 Both Ends NThru Both EndsPNo. of HolesHex SizeValve SizeSeries 916D, PN16 Approximate Dimensions - mmHexISOA pproxDNAB CD E F G H J KLMNPR S TSize Bonnet Weight SizeSeries 940D, PN40 Approximate Dimensions - mmHexISOA pproxDNAB CD E F G H J KLMNPR S TSize Bonnet Weight , 29, 3116, 1925, 2687, 1335642 TECHNICAL BULLETIN 11/125 DIN FLANGED ball VALVES CLASS PN16 PN40B107-4 ENTECHNICAL BULLETIN 11/126 METSOB107-4 ENBILLS OF MATERIALS AND PARTS LISTDN 15 40 Full Bore Series 916D and 940D ValvesPartPart Steel (22)316 Stainless Steel (36)1 Body 1 DIN A216 Gr. WCBDIN A351 Gr. CF8M2 Insert 1 DIN A216 Gr. WCBDIN A351 Gr.

10 CF8M3 Ball316 Stainless steel 4 Stem316 Stainless steel 5 SeatXtreme6 Body SealTFM7 Secondary Stem Seal 2 Graphite8 Primary Stem SealTFM13 Stem BearingFilled PTFE16 Hex NutCarbon steel (zinc plated)300 Series Stainless steel17 HandleCarbon steel (zinc plated)300 Series Stainless steel19 LockwasherCarbon steel (zinc plated)300 Series Stainless steel20 Compression Plate316 Stainless steel25 Socket Cap ScrewStainless steel26 Handle Stop SpacerStainless steel29 Hex Cap Screw ISO 3506, A231 Disc SpringsInconelNote 1:When investment castings are used, chemical and physical properties are determined from a master heat in accordance with ANSI Sect.