Entering Program Mode for Vehicle Security and …

1 Page 1 of 9 Kit Part # s:7L2Z-19G364-AAAL2Z-19G364-A9G1Z-19G364 -AAG1Z-19G364-A7L5Z-19G364-AA9L5Z-19G364 -A7W3Z-19G364-AAAW3Z-19G364-A9C3Z-19G364 -AAAC3Z-19G364-AAL1Z-19G364-BAL1Z-19G364 -AAG1J-19G364-FA7L2J-19G364-CD8L5J-19G36 4-ADRev A. 2/10 System 100 Keyless Entry Remote Start System(1 Way and 2-Way Remote Start Systems) Entering Program Mode for Vehicle Security and Remote Start SystemsVehicleYearVehicleYearAviator2007 Focus2007 - 2010 Crown Vic/Grand Marquis2007 - 2010 Freestar/Monterey2007F-1502007 - 2010 Fusion/Milan/HEV2007 - 2010F-250 Super Duty2007 - 2010 Mustang2007 - 2010 Econoline2007 - 2010 MKS (Non-Intelligent Key)2009 - 2010 Edge/MKX2007 - 2010 MKZ2008 - 2010 Escape/Mariner/HEV2007 - 2010 Ranger2007 - 2010 Expedition/Navigator2007 - 2010 Taurus/Sable/Taurus X2008 - 2009 Explorer/Mountaineer/Sport Trac2007 - 2010 Taurus (Non Intelligent Key) 2010 FiveHundred/Freestyle/Montego2007 Town Car2007 - 2010 Flex2009 - 2010 Transit Connect2010 Focus2007 - 2010 Zephyr2007 Refer to Page 4 for: 7L3Z-19G364-AA & AL3Z-19G364-A (System 200)Refer to Page 8 for.

2 AA5Z-19G364-A & AA5Z-19G364-B (PEPS)Page 2 of 9 Step 1. Close all doors and 2. Press and hold the BRAKE 3. Insert the key into the ignition cylinder and turn to the ON/RUN 4. Locate and press the remote start system override button for 10 seconds. After 10 seconds the horn will honk3 times and the lights will flash 3 times, indicating that the system is now in Transmitter Learn 5. Release the brake pedal and the system override 6. Press and release the remote start system override button 1 time. The horn will honk 4 times and the lights willflash 4 times indicating that the system is now in Bank 1 of the programming 7. Press and release the brake pedal 1 time. The horn will honk 1 time and the lights will flash 1 time, indicatingthat the system is now at the first programable option. Refer to the Option Programming Chart on thenext page for available options and 8. To advance to the next option, press and release the brake pedal.

3 The horn will honk 2 times and the lights willflash 2 times indicating that the system is now at the 2nd programmable option. Repeat for additional optionswithin 9. To advance to Bank 2 programming options, press and release the remote start system override button onetime. The horn will honk 5 times and the lights will flash 5 times indicating that the system is now in Bank 2 ofthe programming 10. Refer to the Option Programming Chart and repeat Step 7 and Step 8, if 11. Once programming is complete, turn off : Transmitters can be programmed by pressing the (Lock) button (1-Way) or the (Start)button (2-Way) one time for each transmitter. Up to 8 transmitters may be : Locate the connected to the remote start harness before :Options can be changed by pressing the (Lock) button (1-Way) or the (Start) button (2-Way)one time. The will turn on and off depending on the desired option.

4 Items in BOLD are 100 Keyless Entry Remote Start System(1 Way and 2-Way Remote Start Systems)Page 3 of 9 OptionDescripition Learn2 Door Trigger PolarityPositiveNegative3 Key-In-Sense PolarityPositiveNegative4 Extended Horn HonkONOFF1 Blind CrankONOFF2 Crank Time8 Time10min15min41 Press to Start (2 press if OFF)**ONOFF5 Diesel ModeO NOFF6 Horn Start ConfirmationONOFF7 Not UsedONOFF8 Not UsedONOFFBank 1 Bank 2 Options in Bold are factory Programming ChartONOFF** 1-Way Remote Start Systems are set to factory default of Press and Hold for Remote Start Systems are set to factory default of 2 Presses for 100 Keyless Entry Remote Start System(1 Way and 2-Way Remote Start Systems)Page 4 of 9 System 200 Keyless Entry Security w/ Remote Start SystemEntering Program Mode for Vehicle Security and Remote Start Systems Kit Part # s:7L3Z-19G364-AAAL3Z-19G364-AVehicleYear Aviator2007 Crown Vic/Grand Marquis2007 - 2010F-1502007 - 2010F-250 Super Duty2007 - 2009 Econoline2007 - 2010 Edge/MKX2007 - 2010 Escape/Mariner/HEV2007 - 2010 Expedition/Navigator2007 - 2008 Explorer/Mountaineer/Sport Trac2007 - 2010 FiveHundred/Freestyle/Montego2007 Flex2009 Focus2007 - 2009 Freestar/Monterey2007 Fusion/Milan2007 - 2009 Mustang2007 - 2010 Ranger2007 - 2010 Taurus/Sable/Taurus X2008 - 2009 Town Car2007 - 2010 Page 5 of 9 Step 1.

5 Insert the key into the ignition cylinder and turn to the ON/RUN 2. Locate and press the remote start system override button for 10 seconds. After 10 seconds the horn will honk3 times and the lights will flash 3 times, indicating that the system is now in Transmitter Learn 3. Release the system override 4. Press and release the remote start system override button 1 time. The horn will honk 4 times and the lights willflash 4 times indicating that the system is now in Bank 1 of the programming 5. Press the (Panic) button 1 time. The horn will honk 1 time and the lights will flash 1 time, indicatingthat the system is now at the first programable option. Refer to the Option Programming Chart on thenext page for available options and 6. To advance to the next option, press the (Panic) button. The horn will honk 2 times and the lightswill flash 2 times indicating that the system is now at the 2nd programmable option.

6 Repeat for additionaloptions within 7. To advance to Bank 2 programming options, press and release the remote start system override button onetime. The horn will honk 5 times and the lights will flash 5 times indicating that the system is now in Bank 2 of the programming 8. Refer to the Option Programming Chart and repeat Step 5 and Step 6, if 9. To advance to Bank 3 programming options, press and release the remote start system override button one time. The horn will honk 6 times and the lights will flash 6 times indicating that the system is now in Bank 3 of the programming 10. Refer to the Option Programming Chart and repeat Step 5 and Step 6, if 11. Once programming is complete, turn off : Locate the connected to the remote start harness before 200 Keyless Entry Security w/ Remote Start SystemNote: Transmitters can be programmed by pressing the (Lock) button one time for each to 8 transmitters may be : Options can be changed by pressing the (Lock) button.

7 The will turn on and off dependingon the desired option. Items in BOLD are factory 6 of 9ON OFF1 Lite Touch Adjustment**2 Full Touch Adjustment**3 Tachometer Learn**4 Door Ajar Switch Input InverterPositiveNegative5 Unlock Switch sense Input InverterPositiveNegative6 Key In Sense Input InverterPositiveNegative7 Extended Horn HonkONOFF8 Optional Alarm DisableO NOFF1 Starter InterruptONOFF2 Passive Starter InterruptONOFF3 Passive ArmingO NOFF4 Passive Door LocksONOFF5 Selectable ChirpsONOFF6 Silent Choice (Requires #5 to be ON)ONOFF ON - Confirmation chirp on 2nd press OFF - Confirmation chirp on 1st press7 Door Ajar Input Entry DelayO NOFF8 Use Trunk Relay As Driver Door UnlockONOFF1 Driver s Door Priority UnlockO NOFF2 Ignition Triggered Door LockO NOFF3 Ignition Triggered Door UnlockO NOFF4 Delayed Door Lock For Ignition Triggered LockONOFF5 Illuminated ExitONOFF6 Horn Used For AlarmONOFF7 Noise ControlONOFF8 Factory RKE System Does Not Arm AlarmONOFFO ption Programming ChartSystem 200 Keyless Entry Security w/ Remote Start SystemBank 1 Bank 2 Bank 3 OptionDescripition in Bold are factory default.

8 ** Lock button will increase sensitivity / Unlock button will decrease sensitivity.** Hood must be in the raised position or the brake pedal must be pressed for the entire duration of the learn procedure.** Program button must be pressed after the tach signal has been learned to lock in the 7 of 91 Tachless ModeONOFF2 Tachless TimingONOFFLED On - 8 Second Crank TimeLED Off - 1 Second Crank Time3 Car Start Run TimeONOFFLED On - 15 MinutesLED Off - 10 Minutes4 Press and Hold to Start (Off = 2 Presses)ONOFF5 Diesel timerO NOFF6 Horn Honk Confirmation on StartONOFF1 Headlight Output timeONOFFLED On - 20 SecondsLED Off - Seconds2 Rear Defrost Output TimeO NOFFLED On - 10 MinutesLED Off - Seconds3 Auxiliary Output TimeONOFFLED On - SecondsLED Off - Time Held4 Power Sliding Door Output TimeONOFFLED On - SecondsLED Off - Time Held5 Not UsedONOFFO ption Programming ChartSystem 200 Keyless Entry Security w/ Remote Start SystemBank 4 Bank 5 OptionDescripition in Bold are factory all Options to Factory DefaultsStep 1.

9 Insert the key into the ignition cylinder and turn to the ON/RUN 2. Locate and press the remote start system override button for 10 seconds. After 10 seconds the horn will honk 3 timesand the lights will flash 3 times, indicating that the system is now in Transmitter Learn 3. Release the system override 4. Press and release the remote start system override button 1 time. The horn will honk 4 times and the lights will flash 4times indicating that the system is now in Bank 1 of the programming 5. Press the (Unlock) button on the transmitter to reset all options to the factory default 8 of 9 Step 1. Turn the ignition 2. Open the Vehicle 3. Locate and press the remote start system override button for 10 10 seconds the horn will honk 3 times and the lights will flash 3 times, indicating that thesystem is now in Transmitter Learn 4. Release the system override 5.

10 Press and release the remote start system override button 1 time. The horn will honk 4 times andthe lights will flash 4 times indicating that the system is now in Bank 1 of the 6. Lower and raise the hood 1 time. The horn will honk 1 time and the lights will flash 1 time,indicating that the system is now at the first programable option. Refer to the OptionProgramming Chart on the next page for available options and 7. To advance to the next option, lower and raise the hood. The horn will honk 2 times and thelights will flash 2 times indicating that the system is now at the 2nd programmable option. Repeatfor additional options within 8. To advance to Bank 2 programming options, press and release the remote start systemoverride button one time. The horn will honk 5 times and the lights will flash 5 times indicatingthat the system is now in Bank 2 of the programming 9. Refer to the Option Programming Chart and repeat Step 6 and Step 7, 10.