FINS Commands - myOMRON

1 Cat. No. W227-E1-2 fins CommandsREFERENCE MANUALFINS CommandsReference ManualRevised June 2001!!!iiNotice:OMRON products are manufactured for use according to proper procedures by a qualified operatorand only for the purposes described in this following conventions are used to indicate and classify precautions in this manual. Always heedthe information provided with them. Failure to head precautions can result in injury to people or dam-age to the an imminently hazardous situation which, if not avoided, will result in death orserious a potentially hazardous situation which, if not avoided, could result in death orserious a potentially hazardous situation which, if not avoided, may result in minor ormoderate injury, or property Product ReferencesAll OMRON products are capitalized in this manual.

2 The word Unit is also capitalized when it refersto an OMRON product, regardless of whether or not it appears in the proper name of the abbreviation Ch, which appears in some displays and on some OMRON products, often means word and is abbreviated Wd in documentation in this abbreviation PC means Programmable Controller and is not used as an abbreviation for any-thing AidsThe following headings appear in the left column of the manual to help you locate different types information of particular interest for efficient and convenient operationof the , 2, Indicates lists of one sort or another, such as procedures, checklists, etc.

3 OMRON, 1993 All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in anyform, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permis-sion of patent liability is assumed with respect to the use of the information contained herein. Moreover, because OMRON isconstantly striving to improve its high-quality products, the information contained in this manual is subject to changewithout notice.

4 Every precaution has been taken in the preparation of this manual. Nevertheless, OMRON assumes noresponsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the informa-tion contained in this this Manual:This manual describes the fins Commands used for communications in OMRON networks and includesthe sections described below. These fins Commands can be addressed to CV-Series PCs, C-seriesPCs, SYSMAC NET Link Units, SYSMAC LINK Units, SYSMAC LINK Support Boards, and CPU BusUnits, such as Personal Computer Units and BASIC Units.

5 They can also be sent to host computers, pro-vided the proper programming is provided at the host read this manual carefully and be sure you understand the information provided before attemptingto program communications in OMRON to read and understand the information provided in this manual may result inpersonal injury or death, damage to the product, or product failure. Please read eachsection in its entirety and be sure you understand the information provided in the sectionand related sections before attempting any of the procedures or operations 1 describes the structure and use of fins 2 describes Commands that can be addressed to CV-series 3 describes Commands that can be addressed to C-series 4 describes Commands that can be addressed to SYSMAC NET Link 5 describes Commands that can be addressed to SYSMAC LINK Units and Support 6 describes

6 Commands that can be addressed to Personal Computer 7 describes Commands that can be addressed to BASIC 8 describes response codes, which are returned with responses to fins Commands to indicatethe result of fins command A provides a list of fins Commands and shows the destinations that support each to read and understand the information provided in this manual may result inpersonal injury or death, damage to the product, or product failure. Please read eachsection in its entirety and be sure you understand the information provided in the sectionand related sections before attempting any of the procedures or operations given.

7 !vTABLE OF CONTENTSSECTION 1 Introduction1 .. 1-1 fins Commands2 .. 1-1-1 Communications Range2 .. 1-1-2 Destinations3 .. 1-1-3 Destinations and Commands4 .. 1-1-4 Data Formats4 .. 1-2 Network Differences5 .. 1-3 command /Response Transmission Data6 .. 1-4 Host Link Communications7 .. 1-4-1 command Format8 .. 1-4-2 Response Block Format9 .. 1-4-3 Frame Checksum Calculation10 .. 1-5 SYSMAC NET and SYSMAC LINK Communications11 .. 1-5-1 Parameters11 .. 1-5-2 Data Formats11 .. SECTION 2 Commands for CV-series PCs13.

8 2-1 command List14 .. 2-2 Memory Area Designations15 .. 2-2-1 Word/Bit Addresses17 .. 2-2-2 Data Configuration17 .. 2-3 Volume Labels and File Names18 .. 2-4 MEMORY AREA READ19 .. 2-5 MEMORY AREA WRITE20 .. 2-6 MEMORY AREA FILL21 .. 2-7 MULTIPLE MEMORY AREA READ21 .. 2-8 MEMORY AREA TRANSFER22 .. 2-9 PARAMETER AREA READ23 .. 2-10 PARAMETER AREA WRITE24 .. 2-11 PARAMETER AREA CLEAR26 .. 2-12 PROGRAM AREA PROTECT27 .. 2-13 PROGRAM AREA PROTECT CLEAR28 .. 2-14 PROGRAM AREA READ28 .. 2-15 PROGRAM AREA WRITE29.

9 2-16 PROGRAM AREA CLEAR30 .. 2-17 RUN30 .. 2-18 STOP31 .. 2-19 CONTROLLER DATA READ31 .. 2-20 CONNECTION DATA READ33 .. 2-21 CONTROLLER STATUS READ33 .. 2-22 CYCLE TIME READ35 .. 2-23 CLOCK READ36 .. 2-24 CLOCK WRITE36 .. 2-25 MESSAGE READ37 .. 2-26 MESSAGE CLEAR38 .. 2-27 FAL/FALS READ39 .. 2-28 ACCESS RIGHT ACQUIRE40 .. 2-29 ACCESS RIGHT FORCED ACQUIRE40 .. 2-30 ACCESS RIGHT RELEASE41 .. 2-31 ERROR CLEAR42 .. 2-32 ERROR LOG READ43 .. 2-33 ERROR LOG CLEAR44.

10 Table of contentsvi2-34 FILE NAME READ44 .. 2-35 SINGLE FILE READ46 .. 2-36 SINGLE FILE WRITE46 .. 2-37 MEMORY CARD FORMAT47 .. 2-38 FILE DELETE47 .. 2-39 VOLUME LABEL CREATE/DELETE48 .. 2-40 FILE COPY48 .. 2-41 FILE NAME CHANGE49 .. 2-42 FILE DATA CHECK49 .. 2-43 MEMORY AREA FILE TRANSFER50 .. 2-44 PARAMETER AREA FILE TRANSFER51 .. 2-45 PROGRAM AREA FILE TRANSFER53 .. 2-46 FORCED SET/RESET54 .. 2-47 FORCED SET/RESET CANCEL55 .. 2-48 Aborting Commands55.