Fisher ENVIRO-SEAL and HIGH-SEAL Packing Systems for ...

1 ENVIRO-SEAL and HIGH-SEALP acking Systems for Sliding-Stem Valves(Live-Loaded) Fisher ENVIRO-SEAL and HIGH-SEAL live-loadedpacking Systems offer exceptional stem sealingcapabilities. These Systems easily install in yourexisting valves or can be purchased with new and HIGH-SEAL Packing Systems helpseal your process to conserve valuable process fluidand protect the environment against the emission ofhazardous or polluting fluids. The long life andreliability of these Systems also reduce yourmaintenance costs and process control applications requiring compliancewith mandated environmental protection regulations,the unique ENVIRO-SEAL Packing system and, forhazardous service, the ENVIRO-SEAL bellows sealsystem are offered. These Packing Systems keepfugitive emission concentrations below the 100 ppm(parts per million) requirement set by the federalEnvironmental Protection Agency (EPA).The HIGH-SEAL Packing system (figure 1) providesexcellent sealing at pressure/temperature ratingsbeyond ENVIRO-SEAL ENVIRO-SEAL and HIGH-SEAL Packing systemsfeature live-loading and unique Packing -ringarrangements for consistent, long-term sealingperformance.

2 The ENVIRO-SEAL Packing system isavailable in double ptfe , graphite ULF, and duplexconfigurations. The HIGH-SEAL Packing system isoffered without ptfe washers (graphite composite),for nuclear applications where ptfe is prohibited, andwith ptfe washers (graphite ULF) for all easy-e Valve Bonnet with ENVIRO-SEAL Packing InstalledVALVEBONNETBELLEVILLESPRINGSVAL VESTEMPACKINGFLANGEPACKINGFOLLOWERW5814- 1*Featuresn Compliance with the Clean Air Act-- The excellentstem sealing of the ENVIRO-SEAL Packing system(figure 1) controls emissions to below the EPAminimum of 100 ppm (parts per million). ENVIRO-SEAL Packing Systems provide an excellentstem seal to help prevent the loss of process Improved Service Life-- ENVIRO-SEAL andHIGH- seal Packing Systems , coupled with a verysmooth stem surface and live-loading, give you longservice life with very low maintenance. Thelive-loading provides a constant load over the life ofthe Packing material. This greatly reduces or, inSliding-Stem Live-Loaded PackingD101633X012 Product :061 September 2017 Sliding-Stem Live-Loaded PackingD101633X012 Product :061 September 2017 2many applications, helps to eliminate your need forpacking box adjustment and maintenance.

3 Theinstalled Packing system provides excellent sealing,guiding, and transmission of loading Easy Installation in Existing Valves-- All parts neededto install the Systems in existing valves are availablein a convenient Adaptable to Many Applications-- ENVIRO-SEAL Systems are available with ptfe , Graphite ULF, or Duplex Packing for through mm (3/8through 1-1/4 inch) diameter valve stems on CL125through CL600 valves. HIGH-SEAL Systems withGraphite ULF Packing are available for mm (3/8 through 2 inch) diameter valve stemson CL600 through CL2500 valves. StandardENVIRO- seal ptfe Packing Systems can be used invacuum service with Packing rings in the standardorientation. It is not necessary to reverse the ptfe Packing forENVIRO- seal PackingSystemsDo not lubricate ENVIRO-SEAL Packing components orthe bonnet bore prior to assembly. Lubrication is oftenused as part of standard valve assembly , lubrication is not required for theENVIRO- seal Packing is required for the Packing studs and it is important to properly lubricate the studthreads and internal nut threads, it is also important toproperly lubricate the contacting face of the Duplex andH2 Duplex PackingSystemsENVIRO- seal DuplexENVIRO- seal Duplex Packing Systems (figure 1) areavailable for Fisher sliding-stem valves with valve stemdiameters ranging from to mm (3/8 to 1-1/4inches).

4 See table 2 for a list of applicable producttypes and stem Duplex Packing Systems weredeveloped, utilizing the benefits of both ptfe andgraphite components. These special Packing systemsprovide the capability of graphite Packing along withlow friction advantages of ptfe Packing . Thus, ENVIRO-SEAL Duplex Packing Systems provide a lowfriction, low emission, fire-tested solution forapplications with process temperatures below 232_C(450_F). ENVIRO-SEAL Duplex Packing Systems weretested in accordance with API Standard 589, Fire TestEvaluation of Valve Stem Packing , first H2 DuplexENVIRO- seal H2 Duplex Packing Systems (figure 1)were developed for high pressure applicationsrequiring low emission performance at pressures up to138 bar (2000 psig) and temperatures up to 149_C(300_F). ENVIRO-SEAL H2 Duplex Packing Systems areavailable for Fisher sliding-stem valves with valve stemdiameters ranging from to mm (1/2 to 1-1/4inches). See table 3 for a list of applicable producttypes and stem Live-Loaded PackingD101633X012 Product :061 September 2017 3 ENVIRO-SEAL Packing System SpecificationsApplicable Sliding-Stem Valve Designs and StemDiametersSee tables 1, 2, and 3 Pressures and Temperatures(1)See bulletin :062, Packing Selection Guidelinesfor Sliding-Stem Valves, MaterialsPTFE Packing Systems : Packing Ring and Lower Wiper: ptfe V-ring(2)Male and Female Adaptor Rings: Carbon-filled PTFEV-ringOptional Male and Female Adaptor Rings: Glass-filledPTFE V-ringGraphite ULF Packing Systems : Packing Rings: GraphiteAnti-Extrusion Washer: Filled ptfe (not required forgraphite Packing )Lantern Ring: S31600 (316 stainless steel) (notrequired for graphite Packing ) Packing Box Flange: S31600 Spring: N07718 Packing Follower: S31600 lined with carbon-filledPTFEP acking Box Studs: Strain-hardened 316 stainlesssteelPacking Box Nuts.

5 316 stainless steel SA194 Grade8M1 The pressure/temperature limits in this bulletin, in the valve bulletin, and any applicable code or standard limitation, should not be In vacuum service, it is not necessary to reverse the ENVIRO-SEAL ptfe Packing Packing System SpecificationsApplicable Sliding-Stem Valve DesignsCL600: Jeasy-e(1), JYD, and JYSCL1500: JCAV4, JHPD, JHPS, and JHPTCL2500: JEHD, JEHS, JEHT, JHPD, JHPS, andJHPTA pplicable Stem DiametersMillimeters: , , , , ,and : J3/8, J1/2, J3/4, J1, J1-1/4, and J2 Maximum Pressures and Temperatures(2)See bulletin :062, Packing Selection Guidelinesfor Sliding-Stem Valves, MaterialsPacking Rings: Carbon/graphite composition,graphite, and zincPacking Box Bushing: GraphitePacking Box Flange, Studs, and Nuts: S31600 (316stainless steel) (other materials are available onrequest)Springs: JS17700 (17-7 stainless steel) orJN077181. easy-e includes ED, ES, ET, EW, and EZ The pressure/temperature limits in this bulletin, in the valve bulletin, and any applicable code or standard limitation, should not be Live-Loaded PackingD101633X012 Product :061 September 2017 4 Figure 1.

6 Fisher ENVIRO-SEAL and HIGH-SEAL Packing SystemsTYPICAL ENVIRO-SEAL Packing SYSTEMWITH DUPLEX PACKINGW5803-3 SPRINGSANTI-EXTRUSIONRINGLANTERNRINGPACK INGBOXSTUDPACKINGRINGVALVEBONNETTYPICAL ENVIRO-SEAL Packing SYSTEMWITH GRAPHITE ULF PACKINGTYPICAL ENVIRO-SEAL Packing SYSTEMWITH ptfe PACKINGTYPICAL HIGH-SEAL Packing SYSTEMWITH GRAPHITE ULF PACKINGA7018 FOLLOWERPACKINGPACKINGBOXSTUDSPRINGSW853 2-1W8533-1 FOLLOWERPACKINGBOXSTUDPACKINGBOXSTUDFOLL OWERPACKINGPACKINGSPRINGSSPRINGS liding-Stem Live-Loaded PackingD101633X012 Product :061 September 2017 5 Table 1. Sliding-Stem Product Availability for Fisher ENVIRO-SEAL ptfe and Graphite ULF Packing SystemsVALVETYPESTEM DIAMETER, mm (INCHES)STEM DIAMETER, (3/8) (1/2) (3/4) (1) (1-1/4)10 mm14 mm19 mmAXXXXX- - -- - -- - -CAV4- - -- - -XXX- - -- - -- - -D- - -X- - -- - -- - -- - -- - -- - -DA- - -X- - -- - -- - -- - -- - -- - -DBQ- - -XXXX- - -- - -- - -DBQ-NS- - -X- - -- - -- - -- - -- - -- - -easy-e (ED, ES, ET,EZ, EW)XXXXX- - -- - -- - -E-NS- - -X- - -- - -- - -- - -- - -- - -EH- - -XXXX- - -- - -- - -ENA- - -- - -- - -- - -X- - -- - -- - -ET-C- - -XXX- - -- - -- - -- - -EWT-C- - -XXX- - -- - -- - -- - -EZ-CXXX- - -- - -- - -- - -- - -FB- - -- - -- - -XX- - -- - -- - -GX- - -- - -- - -- - -- - -XXXGX 3-Way- - -- - -- - -- - -- - -XX- - -HP- - -XXXX- - -- - -- - -HS- - -XXX- - -- - -- - -- - -SS-79- - -- - -X- - -- - -- - -- - -- - -SS-83- - -- - -XXX- - -- - -- - -SS-85- - -X- - -- - -- - -- - -- - -- - -SS-95- - -X- - -- - -- - -- - -- - -- - -SS-98- - -- - -- - -X- - -- - -- - -- - -YDXXXXX- - -- - -- - -YSXXXXX- - -- - -- - -Table 2.

7 Sliding-Stem Product Availability for Fisher ENVIRO-SEAL Duplex PackingVALVETYPESTEM DIAMETER, mm (INCHES) (3/8) (1/2) (3/4) (1) (1-1/4)AXXXXXDBQ- - -XXXX easy-e (ED, ES, ET, EZ, EW)XXXXXEH- - -XXXXFB- - -- - -- - -XXHP- - -XXXXHS- - -XXX- - -SS-83- - -- - -XXXYDXXXXXYSXXXXXS liding-Stem Live-Loaded PackingD101633X012 Product :061 September 2017 6 Figure 2. Fisher ENVIRO-SEAL H2 Duplex Packing SystemPACKING NUTPACKING BOX STUDANTI-EXTRUSIONWASHERPACKINGLANTERN RINGPACKING BOX RINGPACKING FLANGEFOLLOWERGRAPHITE BUSHING GUIDEENVIRO- seal H2 DUPLEX PACKINGT able 3. Sliding-Stem Product Availability for Fisher ENVIRO-SEAL H2 Duplex PackingVALVETYPESTEM DIAMETER, mm (INCHES) (1/2) (3/4) (1) (1-1/4)AXXXXDBQXXXX easy-e (ED, ES, ET, EZ, EW)XXXXEHXXXXFB- - -- - -XXHPXXXXHSXXX- - -SS-83- - -XXXYDXXXXYSXXXXS liding-Stem Live-Loaded PackingD101633X012 Product :061 September 2017 70200400600800100012001400160018002000-5 0050100150200250300350400450500550600 Figure 3. Applications Guidelines Chart for 100 PPM ServicePACKING TEMPERATURE, _CPACKING TEMPERATURE, _F-46-1810376593121149176204232260288315 138124110978369554128140 ENVIRO-SEAL H2 DUPLEXENVIRO- seal GRAPHITE ULFHIGH- seal GRAPHITE ULFENVIRO- seal PTFEENVIRO- seal DUPLEX0500100015002000250030003500400045 005000-400 -300 -200 -1000100 200 300 400 500 600 700 800 900 1000 1100 1200 Figure 4.

8 Applications Guidelines Chart for Nonenvironmental ServicePACKING TEMPERATURE, _CPACKING TEMPERATURE, _F-240-184 -129-73-18389420526031637142748353834531 027624120717213810369340 ENVIRO-SEAL H2 DUPLEXHIGH- seal GRAPHITE ULF,GRAPHITE ULFHIGH-SEALGRAPHITE1495946493304800 ENVIRO-SEALGRAPHITE ULFENVIRO- seal ptfe ANDENVIRO- seal DUPLEXS liding-Stem Live-Loaded PackingD101633X012 Product :061 September 2017 8 Ordering InformationWhen ordering, specify:For Existing Valves1. Process fluid2. Process fluid temperature3. Maximum valve inlet pressures4. Maximum valve pressure drops5. Valve design (ED, YD, etc.), size, and pressure rating6. Valve stem diameter and bonnet type (plain,extension, or bellows)7. Refer to the specifications. Review the informationunder each specification. Write down your choicewhenever a selection is to be New Valves1. Refer to the valve bulletin for ordering Also refer to the specifications. Review theinformation under each specification and in thereferenced tables; write down your choice wheneverthere is a selection to be Automation Solutions Marshalltown, Iowa 50158 USAS orocaba, 18087 BrazilCernay, 68700 FranceDubai, United Arab EmiratesSingapore 128461 contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are notto be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability.

9 All sales aregoverned by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of suchproducts at any time without 1991, 2017 Fisher Controls International LLC. All rights , easy-e, and ENVIRO-SEAL are marks owned by one of the companies in the Emerson Automation Solutions business unit of Emerson Electric Automation Solutions, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are the propertyof their respective Emerson, Emerson Automation Solutions, nor any of their affiliated entities assumes responsibility for the selection, use or maintenanceof any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.