Fuji Duo SC-E Series Contactors - AutomationDirect

1 Fuji Duo Series SC-E ContactorsSC-E Series Contactors Specifications - UL and CSAPart NumberPriceNominal Coil VoltageRated Capacity (HP)Rated AC-3 Current (A) [note 1]Rated AC-1 Thermal Current (A) [note 2]SCCR Ratings (KA)Rated Insulation Voltage (V)Frame Width (mm)3-Phase Motor1-Phase Motor200V220 to 240V440 to 480V550 to 600V100 to 120V 220 to 240 VSC-E02P-24 VAC$ 22551/31920569043SC-E02P-110 VAC$ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ CONTINUED NEXT PAGEN otes: 1. AC3 type loads consist of squirrel cage three-phase motors; occasional, limited jogging duty. 2. AC1 non-inductive or slightly inductive loads. Typically resistive loads ( furnaces, ovens, etc.)SC-E2 SSC-E7 Features 5 to 100 hp at 480 VAC cULus and CSA approval, CE mark, meets JIS and IEC standards. Models SC-E02-xxx to SC-E4-xxx have 3-pole main circuits and come in three sizes with widths of 43mm, 54mm, and 67mm.

2 Models SC-E1-xxx to SC-E7-xxx employ a box terminal structure; allowing wires to be connected directly to the main circuit. Has a finger-protection terminal structure that prevents the exposure of live parts. Models SC-E5-xxx to SC-E7-xxx use a SUPERMAGNETTM (AC-input/DC-output operation) for high operating reliability and requires no surge Size SC-E02-xxx to E05-xxx: 43mm wide SC-E1-xxx to E2S-xxx: 54mm wide SC-E3-xxx, E4-xxx: 67mm wide SC-E5-xxx: 88mm wideSafety Terminals with finger-touch protection (DIN 57106/VDE 0106 Teil100)Utility Box lug terminal construction Long electrical life Easy to wireEnvironmental Low power consumption Recycled thermoplastic resin used for plastic parts. The names of materials are indicated on all major parts to facilitate recyclingStandards & Approvals UL listed, file E42419, Standard UL 508 cUL listed, file E42419, Standard CSA C VDE 0660 JIS C 8201-4-1 IEC 60947-4-1 / EN 60947-4-1 CE compliantOptional accessories Auxiliary contact blocks Coil surge suppression ControlstMRC-28 For the latest prices, please check Series Contactors Specifications - UL and CSAM odelPriceNominal Coil VoltageRated Capacity (HP)Rated AC-3 Current (A) [note 1]Rated AC-1 Thermal Current (A) [note 2]SCCR Ratings (KA)Rated Insulation Voltage (V)Frame Width (mm)

3 3-Phase Motor1-Phase Motor200V220 240V440 480V550 600V100 20V 220 240 VSC-E1-24 VAC$ $ $ $ $ $ $ 10153030354060SC-E2-110 VAC$ $ $ $ $ 152030303105065SC-E2S-110 VAC$ $ $ $ $ $ 202550505156510067SC-E3-110 VAC$ $ $ $ $ 2530505051580105SC-E4-110 VAC$ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ : 1. AC3 type loads consist of squirrel cage three-phase motors; occasional, limited jogging duty. 2. AC1 non-inductive or slightly inductive loads. Typically resistive loads ( furnaces, ovens, etc.)Fuji Duo Series SC-E ControlstMRC-29 For the latest prices, please check Series Contactors Specifications - IECC ontactor Type Rated Capacity (kW)Rated Operating Current (A)RatedThermalCurrent (A)Internal Auxilliary Contact Arrangement3-Phase Motor AC-3 / AC-43-Phase Motor AC-3 / AC-4 Resistive Load AC-1200-240V380-440V500-550V600-690V200- 240V380-440V500-550V600-690V200-240V380- 440 VSC-E02(G) / / 44 / NA4 / NA9 / 99 / 97 / NA5 / NA202020-SC-E03(G)-xxx3 / / / NA / NA12 / 1212 / 129 / NA 7 / NA20 20 20 -SC-E04(G)-xxx4 / / / / NA18 / 1818 / 1813 / NA9 / NA25 25 25 -SC-E05(G) / 411 / / / NA25 / 18 25 / 1817 / NA9 / NA32 32 32 -SC-E1(G) / / 1515 / NA11 / NA32 / 3232 / 3224 / NA15 / NA50 50 50 -SC-E2(G)-xxx11 / / / NA15 / NA40 / 4040 / 4029 / NA19 / NA60 60 60 -SC-E2S(G)

4 -xxx15 / 1122 / / NA22 / NA50 / 4050 / 4038 / NA26 / NA65 65 65 -SC-E3(G) / / 3037 / NA30 / NA68 / 6865 / 6560 / NA38 / NA100 100 100 -SC-E4(G)-xxx22 / / 3037 / NA37 / NA80 / 6880 / 6560 / NA44 / NA105 105 105 -SC-E5-xxx30 / 3055 / 555 5/ NA55 / NA105 / 105105 / 10585 / NA64 / NA1501501502NO+2 NCSC-E6-xxx37 / 3760 / 60 6 0 / NA60 / NA125 / 125125 / 12590 / NA72 / NA150 150 150 2NO+2NC SC-E7-xxx45 / 4575 / 7575 / NA90 / NA150 / 150150 / 150120 / NA103 / NA200 200 200 2NO+2NC Internal Auxiliary Contact Ratings - UL and CSAF rame Size ( note 1 )Rated Insulation Voltage (V)NEMA ICS 5-2000 Ratings ( note 2 )AC RatingsDC RatingsDesignationMaking VABreaking VADesignationMaking/Breaking VAE5 to E7-xxx690A6007200720Q30069 Notes: 1. E02(G) to E4(G) do not have internal auxiliary contact. 2. NEMA ICS 5-2000. For more information, refer to Control Circuit Contact Electrical Ratings, see page Auxiliary Contact Ratings - IEC, JISB ased on IEC 60974-4-1, EN 60947-4-1, JIS C 8201-4-1 Frame Size( note 1 )Rated Insulation Voltage (V)Rated Thermal Current (A)Making and Breaking Capacity (A)Rated Operational Current (A)Minimum Operating Voltage and CurrentAC VoltageAmpsAC VoltageAC-15 (Ind.)

5 Load)DC VoltageDC-13 (Ind. load)E5 to E7-xxx69010120V60120V624V35 VDC, 1: E02(G) to E4(G) do not have internal auxiliary Duo Series SC-E ContactorsInternal Auxiliary Contact ControlstMRC-30 For the latest prices, please check Duo Series SC-E ContactorsDC Coil CharacteristicsFrame SizePower Consumption (W)Pick-Up Voltage (V)Drop-Out Voltage (V)Operating Time (ms)InrushSealedCoil ON to Contact ONCoil OFF to Contact OFFE02G to - x rated coil - x rated coil voltage45-4910-26E1G to - x rated coil - x rated coil voltage40-508-17E3G, - x rated coil - x rated coil - x rated coil - x rated coil voltage35-4126-32E6, - x rated coil - x rated coil voltage28-3427-33AC Coil Characteristics Frame SizePower Consumption (VA)Power Loss (W)Pick-Up Voltage (V)Drop-Out Voltage (V)Operating Time (ms)

6 Inrush Sealed 50Hz60 HzCoil ON to Contact ONCoil OFF to Contact OFF50/60Hz50/60 HzE02 to E05-xxx90/959 - x rated coil - x rated coil voltage9-205-16E1 to E2S-xxx120 - x rated coil - x rated coil voltage10-176-13E3, E4-xxx180 - x rated coil - x rated coil voltage10-188-18E5-xxx80/954 - x rated coil - x rated coil voltage39-4527-33E6, E7-xxx190 - x rated coil - x rated coil voltage31-3730-36 Operating CoilAC Coil, SC-E02-xxx to SC-E4-xxxVoltage CodeCoil Operating Voltage / Frequency24 VAC24 VAC 50Hz / 24-26 VAC 60Hz110 VAC100-110 VAC 50Hz / 110-120 VAC 60Hz220 VAC200-220 VAC 50Hz / 220-240 VAC 60Hz440 VAC415-440 VAC 50Hz / 440-480 VAC 60Hz500 VAC480-500 VAC 50Hz / 500-550 VAC 60 HzOperating CoilDC Coil, SC-E02G-xxx to SC-E4G-xxxVoltage CodeCoil Operating Voltage 24 VDC24 VDCO perating CoilAC/DC Coil (SUPERMAGNET), SC-E5-xxx to SC-E7-xxxVoltage CodeCoil Operating Voltage/Frequency24V24-25 VAC 50/60Hz; 24 VDC100V100-127 VAC 50/60Hz; 100-120 VDC200V200-250 VAC 50/60Hz.

7 200-240 VDC400V380-450 VAC 50/60Hz500V460-575 VAC 50/60 HzCoil CharacteristicsFrame sizeMaking current (A)Breaking current (A)Operating cyclesDurability (operations)220V440V220V440 Vper hourElectricalMechanicalSC-E021081089090 18002 million10 million10 million10 million10 million10 million10 million10 million 5 millionSC-E481680068065012001 million 5 millionSC-E5126012601050105012001 million 5 millionSC-E6150015001250125012001 million 5 millionSC-E7180018001500150012001 million 5 millionPerformance ControlstMRC-31 For the latest prices, please check Duo Series SC-E ContactorsStandard operating conditionsThe magnetic Contactors are manufactured for use in the standard operating conditions given in the Sizes, Tightening Torques - Control CircuitSolid or Stranded Wire (mm2) to (1 to mm diameter) to (1 to mm diameter)Stranded WireFlexible Stranded Wire [in] to [ to ]AWG18 to 14 Ring Terminal [SC-E0x(P) only] [in] [ ]AWGOne18 to 14 Two18 to 14 Insulation Stripping Length 10 mm inFork TerminalMax.

8 WideTerminal Screw screwdriver, H-type, No. 2 (ISO 8764); ADC part number TW-SD-VPH-1 or TW-SD-VPH-2 Flat-blade screwdriver, 1 x x L-type, B (ISO 2830); ADC part number TW-SD-VSL-4 Tightening Torque ( ) to 1 Standard Operating ConditionsAmbient TemperatureOperating: -5 to 55 C [23 to 131 F]No sudden temperature changes resulting in condensation or icing (The average temperature over a 24-hour period must not exceed 35 C [95 F) Storage: -40 to 65 C [-40 to 149 F]Humidity45 to 85%RHAltitude2000m or lowerAtmosphereNo excessive dust, smoke, corrosive gases, flammable gases, steam, or saltVibration10 to 55Hz 15m/s2 Shock50m/s2 Mounting35mm IEC DIN rail mounting (SC-E02 to SC-E4), screw mountingMounting Angle30 30 30 30 StandardIEC 947-4-1, EN 60947-4-1, VDE 0660 JIS C 8201-4-1, JEM 1038UL 508, file E42419.]

9 CSA , file 20479 Wire Sizes, Tightening Torques - Main CircuitContactor TypeSC-E02-xxxSC-E03-xxxSC-E04-xxxSC-E05 -xxxSolid Wire (mm2) to to 6 Two1 to to 6 Stranded Wire (mm2)Flexible Stranded Wire [in] to 10 [ to ]AWG18 to 8 Ring Ter inal [SC-E0x(P) only] [in]Maximum mm [ in] wideAWGOne12 maximum10 maximumTwo12 maximum10 maximumInsulation Stripping Length 11 mm inTerminal Screw SizeM4 ToolPhillips screwdriver, H-type, No. 2 (ISO 8764); ADC part number TW-SD-VPH-1 or TW-SD-VPH-2 Flat-blade screwdriver, 1 x x L-type, B (ISO 2830); ADC part number TW-SD-VSL-4 Tightening Torque ( ) to sure to perform wiring correctly with reference to the wiring diagrams. Main terminals for models SC-E02 to SC-E7 are wired using solid wires or stranded wires. Stranded wires or flexible stranded wires can be connected by twisting them together and crimping a sleeve (ferrule) onto them before torqueIf wires are not tightened sufficiently, they may become hot or loosen, resulting in a fire, short-circuit, electric shock, or other potentially dangerous situation.

10 Tighten wires to the torques specified in these tables. ControlstMRC-32 For the latest prices, please check Duo Series SC-E ContactorsWire Sizes, Tightening Torques - Main CircuitContactor TypeSC-E1, E2, E2S-xxxSC-E3, E4-xxxSC-E5, E6-xxxSC-E7-xxxTop-Only ConnectionSolid or stranded wire (mm2) to to 704 to 704 to 120 Flexible stranded wire with sleeve (mm2) to to to to 95 Flexible stranded wire without sleeve (mm2) to to 504 to 504 to 95 AWG18 to 216 to 2/012 to 2/012 to 250 MCMS olid or stripping length (mm) stranded wire (mm 2) to to 504 to 704 to 120 Flexible stranded wire with sleeve (mm2) to to to to 95 Flexible stranded wire without sleeve (mm2) to to 354 to 504 to 95 AWG 18 to 316 to 1/012 to 2/012 to 250 MCMS heath stripping length (mm) ConnectionSolid or stranded wire (mm2)