Hempel Book PC-MC June 2007

1 product DataProduct DataProduct data SheetHEMPELHEMPEL S THINNERS PAINT is produced and supplied in such a way that thinning is normally notnecessary provided the paint is properly , if the paint is to be applied in a low film thickness (for instance as a "sealercoat") or if the paint has become too thick, in cold weather, the HEMPELTHINNER(s) indicated on the product data sheet may be added to obtain a consistencymost suitable for application. As a general rule, thinning should be kept at a minimumas the quality of the paint work will suffer from too liberal thinning. However, ifapplication is to take place at high temperatures (air and/or steel), thinning may evenbeyond the limits mentioned on the data sheets exceptionally be necessary in order toavoid dry-spray and poor film S THINNERS are blended to give the best results with regard to brushability,spray properties, some cases ordinary solvents may substitute.

2 As such products are beyond ourcontrol, we disclaim any responsibility for the each case the respective product data sheet and - when available - the APPLICATIONINSTRUCTIONS should be consulted. As regards the use of THINNERS for cleaning oftools, see REMARKS purpose thinner for quick drying alkydsHEMPEL S ANTIFOULINGSGLOBIC, OCEANIC and OLYMPICHEMPALIN DECK PAINT 53240 HEMPAQUICK qualitiesAll purpose thinner for HEMPATEX qualitiesHEMPATHANE topcoats and enamelsThinner for HEMPALIN qualities (exceptHEMPALIN DECKPAINT 53240) and other alkydbased products (except HEMPAQUICK qualities)General purpose thinner for HEMPADUR qualitiesHEMPEL S ACRYLIC STOVING ENAMEL 567 SASpecial purpose thinner forHEMPATHANE ENAMEL 55100 HEMPATHANE TOPCOAT 5521025 C/77 F25 C/77 F32 C/90 F23 C/73 F44 C/111 F3 C/37 FHIGHLYFLAMMABLE08020080800823008450084S A08510 EXAMPLES OFGENERAL USEFLASH POINTHEMPEL STHINNER : January 2005 Page 1 of 2 product data SheetSpecial purpose thinner forHEMPEL S TRAFFIC & AIRFIELD MARKING PAINT56880 Hempel S ROADMASTER 568 SAHEMPEL S GALVOSILsFor HEMPADURs used as non-popping sealerson GALVOSILsSpecial purpose tool cleanerHEMPADUR 8521014 C/57 FHIGHLYFLAMMABLE24 C/75 F-4 C/25 F36 C/97 F086SA087000896089460 EXAMPLES OFGENERAL USEFLASH POINTHEMPEL STHINNER :THINNER 08230 has a stronger thinning effect than white spirit or can usually be cleaned with the THINNER prescribed for the cleaning of tools which have been used for HEMPADUR products, Hempel S TOOL CLEANER99610 is recommended.

3 Do not use it for thinning, nor for cleaning after use of polyurethaneproducts, HEMPATHANEs. Note: Hempel S THINNERS are for professional use :Handle with care. Before and during use, observe all safety labels on packaging and paintcontainers, consult Hempel Material Safety data Sheets and follow all local or national safetyregulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Takeprecautions against possible risks of fire or explosions as well as protection of the only in well ventilated BY: Hempel PAINTS (SAUDI ARABIA) - 0802000000000020808000000CO0040823000000 CO0050845000000CO009084SA00000SA00108510 00000CO002086SA00000SA0090870000000CO006 08960000000018946000000CR002 Issued: January 2005 Page 2 of 22/2 Hempel S THINNERS product data sheet supersedes those previously issued. For explanations, definitions and scope, see Explanatory Notes in the Hempel , specifications, directions and recommendations given in this data sheet represent only test results orexperience obtained under controlled or specially defined circumstances.

4 Their accuracy, completeness or appro-priateness under the actual conditions of any intended use of the Products herein must be determined exclu-sively by the Buyer and/or User. The Products are supplied and all technical assistance is given subject to Hempel 's GENERAL CONDITIONS OFSALES, DELIVERY AND SERVICE, unless otherwise expressly agreed in writing. The Manufacturer and Sellerdisclaim, and Buyer and/or User waive all claims involving, any liability, including but not limited to negligence,except as expressed in said GENERAL CONDITIONS for all results, injury or direct or consequential losses ordamages arising from the use of the Products as recommended above, on the overleaf or otherwise. product data are subject to change without notice and become void five years from the date of DataProduct DataProduct data SheetHEMPELHEMPEL S BINDER/SEALER 09810 Description: Hempel 'S BINDER/SEALER 09810 is an economic waterborne acrylic binder/sealerwith good penetrating and dust binding use under solvent-borne as well as waterborne coating use: As a sealer for waterborne coating systems on interior and exterior concrete, masonry,plaster, wood and similar substrates like walls, ceilings, partitions, :Not included in Group Assortment.

5 Local availability subject to CONSTANTS:Colours/Shade nos: Transparent/00000 Finish:Semi-flatVolume solids, %:29 1 Theoretical spreading rate:Not relevant (see REMARKS overleaf)Flash point:>66 C/151 FSpecific kg/litre - lbs/US gallonDry to touch:1 (approx.) hour at 20 C/68 FThe physical constants stated are nominal data according to the Hempel Group's approved formulas. They aresubject to normal manufacturing tolerances and where stated, being standard deviation according to ISO DETAILS:Application method:Air sprayBrush/RollerThinner ( ):Fresh water (5%)Fresh water (10%)Cleaning of tools:Fresh waterRecoat interval, min:2 hours (20 C/68 F)Recoat interval, max:NoneSafety:Handle with care. Before and during use, observe all safety labels on packaging andpaint containers, consult Hempel Material Safety data Sheets and follow all local ornational safety regulations. Avoid inhalation, avoid contact with skin and eyes, and donot swallow.

6 Take precautions against possible risks of fire or explosions as well asprotection of the environment. Apply only in well ventilated : January 2005 Page 1 of 2