Intertenancy Barrier Systems for Terrace Homes

The GIB® Intertenancy Barrier Systems for Terrace Homes consist of vertically spanning elements extending from the ground slab or footing up to the roof. Consideration of roof framing is also important to avoid penetrating the barrier with trusses, ties, hip beams, etc. GIB® Intertenancy Barrier Systems for Terrace Homes is ideally

Tags:

  System, Barriers, Caterer, Intertenancy, Intertenancy barrier systems for terrace

Information

Documents from same domain

Noise Control Systems - GIB

www.gib.co.nz

This technical document provides noise control systems for designers, specifiers and builders. This information can be used during the building design process to help select systems to achieve the desired level of acoustic comfort. GIB Noise Control ® Systems have been independently tested and evaluated and can be depended on to perform.

  System, Control, Noise, Noise control, 174 system, Noise control systems

Fire Rated Systems - gib.co.nz

www.gib.co.nz

Fire rated floor/ceiling systems Fire rated floor/ceiling Specification number LB/ NLB STC/ Rw FRR IIC Lining requirements Page Timber joist GBFC 15 LB 38/38 15/15/15 31 1 layer 13mm GIB® Standard 54 GBFC 30 LB 39/40 30/30/30 32 1 layer 13mm GIB Fyreline® 56 GBFC 45 LB 39/40 45/45/45 32 1 layer 13mm GIB Fyreline® 56 GBFC 60 LB 39/40 60/60/60 32 1 layer 16mm GIB Fyreline® 58

  System, Trade, Fire, Fire rated, Fire rated systems, Systems fire rated

EzyBrace Systems - GIB

www.gib.co.nz

design flexibility and further simplification of the bracing design and build process. NEW GIB EZYBRACE® 2016 DESIGN SOFTWARE — Improved user interface with simplified bracing design process. — Increased functionality including exterior line check function, easy insert/deletion of bracing elements and built in software help function.

  System, Design

SyStem and InStallatIon manual - GIB

www.gib.co.nz

• GIB Quiet Clip ® for use in GIB Noise control systems Alternative method • Directly by fastening with pairs of min GIB Grabber® 32mm x 8g wafer head screws through the flange (consult span tables pg 5) • Alternatively pairs of min 45mm x 2.8mm FH nails can be used • For fixing to steel framing a drill tip screw is recommended

  Manual, System, Installation, Quiet, System and installation manual

Deflection Head Details JANUARY 2006 - GIB®

www.gib.co.nz

Fire rated sealant 2 strips of GIB¤ Plasterboard (same as linings) Wall frame top channel Steel studs GIB¤ Plasterboard wall linings (as specified to …

  Details, Deflection, Heads, Deflection head details