N en 1 5 135 PRA 182000 - IMI Precision Engineering

1 N/en policy is one of continued research and development. We therefore reserve the right to amend,without notice, the specifications given in this , PRA/ 182000 /M Profile cylinders conforms to ISO 15552 Non-magnetic and magnetic piston Double acting 32 to 125 mm High performance, stability and reliabilityM/50 switches can be mounted flush with the profileCylinders and mountings conform to ISO 15552 (ISO 6431, VDMA 24562 and NFE 49-003-1)Polyurethane seals ensure efficient low friction operation and long lifeTechnical dataMedium:Compressed air, filtered, lubricated or non-lubricatedStandard:ISO 15552 Operation:PRA/ 182000 : double acting, adjustable cushioningPRA/ 182000 /M: double acting, magnetic piston, adjustable cushioningOperating pressure:1 to 16 barOperating temperature:-20 to +80 C max. (consult our Technical Service for use below +2 C)High temperature version: 150 C diameters:32, 40, 50, 63, 80, 100, 125 mmStrokes:Standard: see page 3 Non-standard strokes available (10 to 3000 mm)Materials:Profile barrel: anodised aluminiumEnd covers: pressure diecast aluminium Piston rod: stainless steel (Martensitic) Piston rod seals: polyurethane Piston seals: polyurethaneO-rings: nitrile rubberOrdering examplesSee page 3 Mountings and switchesSee page 4 and 5 Alternative variantsSingle acting cylinders see page N/en with locking unitSee data sheet N/en and 10 Guide blocks see page N/en pistonNon-magnetic piston 10/09 N/en , PRA/ 182000 /MOur policy is one of continued research and development.

2 We therefore reserve the right to amend,without notice, the specifications given in this the cylinder models style H*1), T, C and S see options selector*1) Cylinder style H: 32 .. 100 mmCylinder variantsHTSymbolModelSymbolModel DescriptionDimensionsNon-magneticmagneti cH T C SpistonH T C SpistonPage PRA/ 182000 PRA/ 182000 /MStandard cylinder6 PRA/ 182000 /W1 PRA/ 182000 /W2 Cylinder with special wiper/seal (suitable for appl. with6cement, plaster (stucco), arizona sand,hoar-frost or ice) PRA/ 182000 /X1 PRA/ 182000 /X2 Low friction cylinders, operating pressure: 1 to 10 bar6 Medium: Compressed air, filtered and non-lubricated recommendedPRA/ 182000 /IILPRA/ 182000 /MILC ylinder barrel turned at 90 for use with guide blocksQA/8000/51 and QA/8000/61 PRA/ 182000 /IU PRA/ 182000 /MUCylinder with extended piston rod6 PRA/ 182000 /W5 PRA/ 182000 /W6 Cylinder with extended piston rod and special wiper/seal(suitable for applications with cement, plaster (stucco),6arizona sand, hoar-frost or ice) PRA/ 182000 /G PRA/ 182000 /MGCylinder with piston rod bellows8 PRA/ 182000 /W PRA/ 182000 /MWCylinder without cushioning6 PRA/ 182000 /X3 PRA/ 182000 /X4 Low friction cylinders without cushioning,6operating pressure: 1 to 10 bar Medium.

3 Compressed air,filtered and non-lubricated recommended PRA/ 182000 /J PRA/ 182000 /JMCylinder with double ended piston rod7 PRA/ 182000 /W3 PRA/ 182000 /W4 Cylinder with double ended piston rod and special wiper/seal (suitable for applications with cement,7plaster (stucco), arizona sand, hoar-frost or ice) PRA/ 182000 /IT PRA/ 182000 /MTFour position cylinders7 PRA/ 182000 /N1 PRA/ 182000 /N2 Cylinder with non-rotating piston rod, 32 to 100 mm7 PRA/ 182000 /L2 PRA/ 182000 /L4 Cylinder with locking unit (passive)8spring force on removal of the signal to the unit. Operating pressure for locking unit: 4 to 10 barWarningThese products are intended for use in industrial compressed air sys-tems only. Do not use these products where pressures and tempera-tures can exceed those listed under Technical Data .Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applica-tions not within published specifications, consult misuse, age, or malfunction, components used in fluid power systems can fail in various modes.

4 The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide ade-quate safeguards to prevent personal injury or damage to equipmentin the event of such designers must provide a warning to end users in the system instructional manual if protection against a failuremode cannot be adequately designers and end users are cautioned to review specificwarnings found in instruction sheets packed and shipped with these 10/09 Our policy is one of continued research and development. We therefore reserve the right to amend,without notice, the specifications given in this , PRA/ 182000 /MOptions selector P A/182 / / Strokes (mm)3000 (non-magnetic piston)SubstituteStandardOhneSpecial wiper/sealW1 Low frictionX1 Piston rod bellowGWithout cushionWWithout cushion, low fictionX3 Double ended piston rodJDouble ended piston rodspecial wiper/sealW3 Four-positon cylinderITNon-rotating piston rod (internal)N1 Locking unit (passive)L2 Barrel turned at 90 (for use withguideblocks QA/8000/51 and.)

5 /61)IILE xtended piston rodIUExtended piston rod, special wiper/sealW5P*A/182**/IU/**/**/W5/Extens ion (mm)Non-standard variantsSubstituteHigh temperature version: 150 C ( 32 to 100 mm)HPiston rod materialSubstituteStainless steel martensiticRHard chromium platedCStainless steel austeniticSCylinder Substitute032, 040, 050, 063, 080, 100, 125 Variants (magnetic piston)SubstituteStandardMSpecial wiper/sealW2 Low fictionX2 Piston rod bellowMGWithout cushionMWWithout cushion, low fictionX4 Double ended piston rodJMDouble ended piston rodspecial wiper/sealW4 Four-positon cylinderMTNon-rotating piston rod (internal)N2 Locking unit (passive)L4 Barrel turned at 90 (for use withguideblocks QA/8000/51 and ../61)MILE xtended piston rodMUExtended piston rod,special wiper/sealW6P*A/182**/MU/**/**/W6/Extens ion (mm)Note: If option is not required, disregard option position withinpart number eg. RA/192100/M/100. For combinations ofcylinder variants consult our technical service.

6 Please notethat heat resistant seals are not available for all options selector explains only the cylinder variants. Additional variants/options are not possible. Standard strokesCylinderStandard strokes (mm) 25508010012516020025032040050032 40 50 63 80 100 125 Ordering exampleCylinderPneumatic cylinder 80 mm, magnetic piston, stroke 50 mm Quote: PRA/182080/M/50 SwitchesMagnetically operated switch, reed, LED, cable length 2 mQuote: M/50/LSU/2 VMountingsFront flange style G, for cylinder 80 mm Quote: QA/8080/22111111214131516171819102345769 810/09 N/en , PRA/ 182000 /MOur policy is one of continued research and development. We therefore reserve the right to amend,without notice, the specifications given in this AAKB, GCDD2 FFHR Page 9 Page 9 Page 9 Page 9 Page 9 Page 9 Page 10 Page 10 Page 1032QM/8032/35QM/8025/38QA/8032/22QA/803 2/21QA/8032/23QA/8032/42QM/8025/25QA/803 2/34QA/8032/2740QM/8032/35QM/8040/38QA/8 040/22QA/8040/21QA/8040/23QA/8040/42QM/8 040/25QA/8040/34QA/8040/2750QM/8050/35QM /8050/38QA/8050/22QA/8050/21QA/8050/23QA /8050/42QM/8050/25QA/8050/34QA/8050/2763 QM/8050/35QM/8050/38QA/8063/22QA/8063/21 QA/8063/23QA/8063/42QM/8050/25QA/8063/34 QA/8063/2780QM/8080/35QM/8080/38QA/8080/ 22QA/8080/21QA/8080/23QA/8080/42QM/8080/ 25QA/8080/34QA/8080/27100QM/8080/35QM/80 80/38QA/8100/22QA/8100/21QA/8100/23QA/81 00/42QM/8080/25QA/8100/34QA/8100/27125QM /8125/35QM/8125/38QM/8125/22QM/8125/21QM /8125/23QA/8125/42QM/8125/25QA/8125/34QM /8125/27 Style SSSSWUFUHURUSG roove keyGroove cover Page 11 Page 11 Page 11 Page 10 Page 10 Page 10 Page 11 Page 14 Page 1232QA/8032/41M/P19931M/P19493QM/8025/32

7 PQA/182032/40QA/8032/33M/P40310M/P72816M /K72725/100040QA/8040/41M/P19932M/P19494 QM/8040/32 PQA/182040/40QA/8040/33M/P40311M/P72816M /K72725/100050QA/8040/41M/P19933M/P19495 QM/8050/32 PQA/182050/40QA/8050/33M/P40312M/P72816M /K72725/100063QA/8063/41M/P19934M/P19496 QM/8050/32 PQA/182063/40QA/8063/33M/P40313M/P72816M /K72725/100080QA/8063/41M/P19935M/P19497 QM/8080/32 PQA/182080/40QA/8080/33M/P40314M/P72816M /K72725/1000100QA/8100/41M/P19936M/P1949 8QM/8080/32 PQA/182100/40QA/8100/33M/P40315M/P72816M /K72725/1000125QA/8100/41M/P19937M/P1949 9QM/8125/32 PQA/182125/40QM/8125/33M/P71355M/P72816M /K72725/1000 Valve mounting kitGuide block Page 11 Data sheet 40 50QA/180050/22/5463QA/180050/22/5480QA/1 80080/22/54100QA/180080/22/54125QA/18008 0/22/5419131484111761612391575211810 MountingsN/en 10/09 Our policy is one of continued research and development. We therefore reserve the right to amend,without notice, the specifications given in this , PRA/ 182000 /MTheoretical forces, cushion, air consumptionTypeCylinderTheoretical forces (N) at 6 barCushion lengthInitial cushionAir consumption (l/cm stroke) at 6 bar outstrokeinstroke(mm) volume (cm3)outstrokeinstrokePRA/182032/.

8 324824141912,30,0560,048 PRA/182040/.407546332220,70,0880,074 PRA/182050/.50117899024360,1370,114 PRA/182063/.631870168024640,2180,195 PRA/182080/.8030162722271160,350,32 PRA/182100/.10047104416342420,550,51 PRA/182125/.12573636882414510,860,79 With cableWith connector (M8x1)Cable/TypeVoltageCurrentTemperatur eLEDF eaturesConnectorCableCable withReedSolid stateV ClengthtypeConnectorDatasheetM/50/LSU/*V 10 to 24010 to 170180 mA-20 to +80 2, 5, 10 mPVC 2 x 0,25 N/en 10 to 24010 to 170180 mA-20 to +80 5 mPUR 2 x 0,25 N/en 10 to 24010 to 170180 mA-20 to +150 2 mSilicone 2 x 0,25 N/en 10 to 24010 to 170180 mA-20 to +80 Changeover5 mPVC 3 x 0,25 N/en 10 to 6010 to 75180 mA-20 to +80 Plug M8x15 mPVC 3 x 0,25M/P73001/5N/en M/50/EAP/*V 10 to 30150 mA-20 to +80 PNP2, 5, 10 mPVC 3 x 0,25 N/en M/50/EAP/CP 10 to 30150 mA-20 to +80 PNP, Plug M8x15 mPVC 3 x 0,25M/P73001/5N/en M/50/EAP/CC 10 to 30150 mA-20 to +80 PNP, Plug M12x15 mPVC 3 x 0,25M/P34614/5N/en M/50/EAN/*V 10 to 30150 mA-20 to +80 NPN2, 5, 10 mPVC 3 x 0,25 N/en M/50/EAN/CP 10 to 30150 mA-20 to +80 NPN, Plug M8x15 mPVC 3 x 0.

9 25M/P73001/5N/en * Please insert cable length Further information (technical data, cable material, dimensions) see + #GGL 2 VDPLEEL 12 KWAMKK B e 11L 9 BGRT BA e 11 BHA B VAMM h 9 80 .. 125 mmWHAPA - BEEPLKVSW1 BGRT210/09 N/en , PRA/ 182000 /MOur policy is one of continued research and development. We therefore reserve the right to amend,without notice, the specifications given in this dimensionsPRA/ 182000 , PRA/ 182000 /M Standard cylinderType AMAP Be 11 BAe 11 BGBH EEEGKKKV KWL2 PRA/182032/.32223,5303016647G 1/827,5M10x1,2517520 PRA/182040/.40244,5353516653G 1/432M12x1,2519622 PRA/182050/.50326404016865G 1/431M16x1,524827 PRA/182063/.633210454516875G 3/833M16x1,524829 PRA/182080/.80408,54545171995G 3/833M20x1,5301033 PRA/182100/.10040955551719115G 1/237M20x1,5301036 PRA/182125/.125541060602024140G 1/246M27x24113,545 Type L8L9L12 MMh 9PL RRTSW VAVDWHat 0 mmper 25 mmPRA/182032/.329446121332,5M 61036260,51 kg0,06 kgPRA/182040/.

10 4010546,5161538M 6133,56300,80 kg0,08 kgPRA/182050/.50106582018,546,5M 8173,56371,33 kg0,12 kgPRA/182063/.6312158201956,5M 81746371,80 kg0,13 kgPRA/182080/.80128 10251972M 102246463,25 kg0,20 kgPRA/182100/.100138 10251889M 102246514,81 kg0,23 kgPRA/182125/.125160 133220110M 1227615,5658,00 kg0,33 kg1#strokecushion screw2M/50 switches can be mounted flush with the profileN/en 10/09 Our policy is one of continued research and development. We therefore reserve the right to amend,without notice, the specifications given in this , PRA/ 182000 /MAlternative variantsPRA/ 182000 /J, PRA/ 182000 /JM Cylinder with double ended piston rodPRA/ 182000 /IT, PRA/ 182000 /MT Four-position cylinderPRA/ 182000 /N1, PRA/ 182000 /N2 Cylinder with non-rotating piston rodType ZML8 PRA/182032 L 8L 10L 11 PRA/182032/.T32942477 PRA/182040/.T401052788 PRA/182050/.T501062948 PRA/182063/.T631213259 PRA/182080/.T801283579 PRA/182100/.T1001383879 PRA/182125/.