NETGEAR LTE Modem LM1200 Quick Start Guide

1 What's in the box Connect to the LTE network Power on your LM1200 Modem Connect the LM1200 LAN port Regulatory and Legal Quick Start USB power adapter To obtain an activated SIM card, contact your mobile 1. Connect the USB cable to the power port on the You can connect a router or a computer (with an For regulatory compliance information including the EU Declaration of broadband service provider. Modem and to the provided power adapter. Ethernet port) to the LM1200 LAN port. Connecting Conformity, visit LM1200 . Modem USB Type C 2. Plug the power adapter into an indoor power a WiFi router lets you use WiFi to access the LTE See the regulatory compliance document before connecting the power cable 1. Ensure that power to the Modem is off. network from a computer or WiFi device.

2 Supply. outlet. For NETGEAR 's Privacy Policy, visit Ethernet 2. Align the nano SIM card with the notch toward the LTE Modem LM1200 cable nano SIM card slot and the chip side facing down. Note: We recommend connecting the USB 1. Connect the Ethernet cable to the LM1200 LAN policy. cable only to the power adapter that came in the port and the WAN or Internet port on your router. By using this device, you are agreeing to NETGEAR 's Terms and Conditions at If you do not agree, package. Connecting the USB cable to a USB port return the device to your place of purchase within your return period. on a computer might not work correctly. Rear panel The Power LED lights solid amber and then NETGEAR , Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR , Inc.

3 Any non NETGEAR trademarks are used for reference purposes only. lights solid green. External antenna (TS9 ports). The Modem searches for the mobile broadband network available from the nano SIM, which might The router now uses the LM1200 Modem 's LTE. take several minutes. network as its main (primary) Internet connection. 3. Check the Signal Strength LED . 2. For Internet access, connect your computer or 3. Gently insert the nano SIM card into the nano SIM Green: The LTE connection is good. WiFi device to the router. NETGEAR , Inc. Reset button card slot. Amber: The LTE connection is weak. Try a 350 East Plumeria Drive San Jose, CA 95134, USA. Nano SIM Power different location, such as near a window. card slot (USB Type C port) July 2021. Red: The nano SIM card isn't inserted correctly, NETGEAR INTERNATIONAL LTD.

4 Gigabit Ethernet ports or the Modem can't automatically connect Floor 1, Building 3. University Technology Centre to the LTE network (see Add and activate a Curraheen Road, Cork, T12EF21, Ireland custom APN profile). Optional: set up WAN failover Manage your LM1200 Modem Add and activate a 6. Enter the settings for the new APN profile. LEDs Support and Community Use the information that your mobile service for a wired Modem custom APN profile provider gave you. If your mobile service provider You can log in to your LM1200 Modem to view and The LEDs on the LM1200 Modem indicate its status Visit to get your questions did not specify some settings, leave the default change its settings from a computer or a device that and activity. answered and access the latest downloads.

5 With this setup, your wired Modem (cable, DSL, or settings. is connected to the Modem with an Ethernet cable or If the LM1200 Modem does not automatically connect You can also check out our NETGEAR Community for fiber) provides the primary Internet access. If the wired WiFi. to your mobile broadband network, contact your 7. Click the Save button. LED Description helpful advice at Internet connection isn't working, the LM1200 Modem mobile service provider for the APN profile that they The new APN profile displays on the page, but is provides a failover Internet connection through the 1. Launch a web browser from the connected Power Solid amber: The Modem is starting up. require. Then log in to the Modem and enter the not yet the active profile. LTE network.

6 Computer or device. Solid green: The Modem is powered on. custom APN profile settings. Blinking amber: Device error. 2. In the address field of the web browser, enter 8. Select the radio button next to the APN profile 1. Connect the Ethernet cable to the LM1200 LAN. 1. Launch a web browser from a computer or mobile that you just added. Ethernet Solid amber: A device is connecting to this port and the WAN or Internet port on your router. device that is connected to the Modem . The Modem now uses the selected APN profile LAN port. 2. Use another Ethernet cable (not included) to 3. In the Sign In field, enter the default password, Green: A device is connected to this port. and click the Sign In button. 2. In the address field of the web browser, enter to establish a connection with your mobile connect your wired Modem (cable, DSL, or fiber) broadband service provider's network.

7 Ethernet Solid amber: A device is connected to this to the LM1200 WAN port. See the Modem label for the default password. The limited Dashboard page displays. WAN port. If you still cannot get an Internet connection, Note: While the password that you enter is unique to Solid green: Full data connectivity. contact your mobile broadband service provider your Modem and is secure, we recommend that you 3. In the Sign In field, enter the password, and click to verify the information for the APN profile. change it to a password that you want to use. the Sign In button. Signal Green: The LTE connection is good. Blinking See the Modem label for the default password. Strength indicates data traffic. Amber: The LTE connection is weak. Blinking 4. Select Settings > Network > APN.

8 Indicates data traffic. 3. Log in to the LM1200 Modem and enable WAN Red: The Modem can't connect to the LTE. The APN page displays. network. failover. 5. Click the Add button. For information about how to set up WAN failover, see the LM1200 user manual. The New APN section opens on the page.