Example: dental hygienist
Noise Control Systems - GIB
SYSTEMS SUMMARY TABLE Noise control systems – intertenancy Central barrier walls Specification number LB/ NLB STC Rw FRR Lining requirements Detail Page Timber frame walls — with GIB Barrierline ® central barrier GBTLAB 60a LB 68 66 60/60/60 2 x 10mm GIB® Standard Plasterboard each side H_BRW01 - GBT(L)AB 60a 16
Tags:
Information
Domain:
Source:
Link to this page:
Documents from same domain
Fire Rated Systems - gib.co.nz
www.gib.co.nzFire rated floor/ceiling systems Fire rated floor/ceiling Specification number LB/ NLB STC/ Rw FRR IIC Lining requirements Page Timber joist GBFC 15 LB 38/38 15/15/15 31 1 layer 13mm GIB® Standard 54 GBFC 30 LB 39/40 30/30/30 32 1 layer 13mm GIB Fyreline® 56 GBFC 45 LB 39/40 45/45/45 32 1 layer 13mm GIB Fyreline® 56 GBFC 60 LB 39/40 60/60/60 32 1 layer 16mm GIB Fyreline® 58
Intertenancy Barrier Systems for Terrace Homes
www.gib.co.nzThe GIB® Wall Clips are intended to melt on the fire side only, allowing collapse without damage to the remaining system. Noise control performance The noise control performance of the GIB® Intertenancy Barrier Systems for Terrace Homes is expressed in terms of Sound Transmission Class (STC) and Weighted Sound Reduction Index (Rw).
EzyBrace Systems - GIB
www.gib.co.nzdesign flexibility and further simplification of the bracing design and build process. NEW GIB EZYBRACE® 2016 DESIGN SOFTWARE — Improved user interface with simplified bracing design process. — Increased functionality including exterior line check function, easy insert/deletion of bracing elements and built in software help function.
SyStem and InStallatIon manual - GIB
www.gib.co.nz• GIB Quiet Clip ® for use in GIB Noise control systems Alternative method • Directly by fastening with pairs of min GIB Grabber® 32mm x 8g wafer head screws through the flange (consult span tables pg 5) • Alternatively pairs of min 45mm x 2.8mm FH nails can be used • For fixing to steel framing a drill tip screw is recommended
Deflection Head Details JANUARY 2006 - GIB®
www.gib.co.nzFire rated sealant 2 strips of GIB¤ Plasterboard (same as linings) Wall frame top channel Steel studs GIB¤ Plasterboard wall linings (as specified to …
Related documents
TECHNICAL DATA SHEET ISSUED BY TIMBER QUEENSLAND ...
www.qbcc.qld.gov.au©TIMBER QUEENSLAND LIMITED TECHNICAL DATA SHEET 4 RESIDENTIAL TIMBER DECKS Revised March 2014 Page 3 TERMITE PROTECTION Physical and/or Chemical termite management systems must be provided to protect the deck and to ensure termites do not bypass protection systems to adjacent structures. Termite management systems
GEOTECHNICAL DESIGN PROCEDURE FOR FLEXIBLE WALL …
www.dot.ny.govtemporary or permanent flexible wall systems, or shoring systems, comprised of sheeting or soldier piles and lagging. ... is made of steel, with timber, vinyl, and concrete used less often. Soldier piles used as part of a shoring system are structural units, or members, which are spaced
01-925 Texas Timber Operations Sales and Use Tax …
comptroller.texas.govTexas Timber Operations Sales and Use Tax Exemption Certificate. Commercial timber producers must use this form to claim exemption from Texas sales and use tax when buying, leasing or renting qualifying timber items they will use exclusively in the production of timber products for sale.
INSTALLATION GUIDE ROOF TRUSS - Pryda
pryda.com.auThe allowable spans for timber planks are given in Table 1 of section 2.2 Appendix B of “Preventing Falls in Housing Construction – Code of Practice – July 2012”. Laminated timber, aluminium and steel planks must be used in accordance with the manufacturer’s directions. When trusses are erected at up to 600 mm centres,
LVL User’s Guide T e ch nialD tf ... - West Fraser Timber
www.westfraser.comWest Fraser Timber Co. Ltd. is committed to responsible stewardship of the environment. A philosophy of continual improvement of our forest practices and manufacturing procedures has been adopted to optimize the use of resources and minimize or eliminate the impact of our operations on the environment.
Timber connections Centre for Offsite Construction ...
www.napier.ac.ukIt is commonly stated that “a structure is a constructed assembly of joints separated by members” (McLain ,1998) and in timber engineering the joint is generally the critical factor in the design of the structure. The strength of the connectors in the joint will normally dictate the strength of the structure; their stiffness will greatly influence its overall behaviour and member sizes