NORSOK STANDARD P-100

1 This NORSOK STANDARD is developed by NTS with broad industry participation. Please note that whilst every efforthas been made to ensure the accuracy of this STANDARD , neither OLF nor TBL or any of their members will assumeliability for any use thereof. NTS is responsible for the administration and publication of this Technology CentreTelephone: + 47 22 59 01 00 Oscarsgt. 20, Postbox 7072 MajorstuenFax: + 47 22 59 01 29N-0306 OsloEmail: reservedNORSOK STANDARDP-100 Rev. 2, November 2001 Process systemsNORSOK STANDARD P-100 Rev.

2 2, November 2001 NORSOK standardPage 1 of 128 ContentsForeword6 Introduction61 Scope72 Normative references73 Definitions and system and maintenance requirements95 General process equipment exchanger launcher/receiver design206 Topside flowlines and manifolds (system 16) and requirements227 Separation and stabilisation (system 20) and requirements258 Crude handling (system 21) and requirements289 Gas compression (system 23, 26 & 27)28 NORSOK STANDARD P-100 Rev.

3 2, November 2001 NORSOK standardPage 2 of and requirements3110 Gas treatment (system 24) and Environmental requirements3511 Gas conditioning (system 25) and Environmental requirements3912 Water injection (system 29) and Environmental4213 Cooling medium (system 40) and Environmental requirements4414 Heating medium (system 41) requirements45 NORSOK STANDARD P-100 Rev. 2, November 2001 NORSOK standardPage 3 of and Environmental4615 Chemical injection (system 42) and Environmental requirements4916 Flare (system 43) and Environmental requirements5417 Oily water treatment (system 44) and Environmental requirements5718 Fuel gas (system 45) and Environmental requirements5919 Methanol injection (system 46) and requirements61 NORSOK STANDARD P-100 Rev.

4 2, November 2001 NORSOK standardPage 4 of Environmental requirements6220 Chlorination (system 47) and Environmental requirements6421 Sea water (system 50) and Environmental6622 Fresh water (system 53) and Environmental requirements6823 Open drain (system 56) and Environmental requirements7124 Closed drain (system 57) and Environmental requirements7325 Diesel oil (system 62) STANDARD P-100 Rev. 2, November 2001 NORSOK standardPage 5 of and Environmental7526 Compressed air (system 63) and Environmental requirements7827 Inert gas (system 64) and Environmental requirements8028 Hydraulic power (system 65) and Environmental83 Annex A (informative) System design data sheets84 Errata as per 2002-04-24 to P-100 Process systems Rev.

5 2, November 2001 ERRATA TO NORSOK STANDARD PROCESS SYSTEM P-100 REV 2, NOV 2001 _____ Updated for misprints as noted per 2002-04-24 Page 10, Section : Gas velocity Typical maximum gas velocity for a horizontal separator: Vs=K x [( l g)/ g] x (L/6) K = (typical) LAH liquid level inside separator Page 14, Section : Last sentence "To " was erroneously included and has been removed. NORSOK STANDARD P-100 Rev. 2, November 2001 NORSOK standardPage 6 of 128 ForewordThe NORSOK standards are developed by the Norwegian petroleum industry to ensure adequate safety,value adding and cost effectiveness for existing and future petroleum industry NORSOK standards are prepared to complement available international standards ato fill the broadneeds of the Norwegian petroleum industry.

6 Where relevant NORSOK standards will be used to provide theNorwegian industry input to the international standardisation process. Subject to development andpublication of international standards , the relevant NORSOK STANDARD will be standards are developed according to the consensus principle generally applicable for moststandards work and according to established procedures defined in NORSOK A-001, which also applies forthis NORSOK preparation and publication of the NORSOK standards is supported by OLF (The Norwegian OilIndustry Association) and TBL (Federation of Norwegian Manufacturing Industries).

7 NORSOK standards areadministered and issued by NTS (Norwegian Technology Centre).Annex A is development of this STANDARD is primarily based on proven technology, but it does not preclude the useof new of this STANDARD are encouraged to give comments in order to improve the STANDARD based following changes have been made to revision 2 of this STANDARD : Included two new systems, Gas Conditioning (system 25) and Chemical injection (system 42). The document has been restructured with normal chapter numbers and the system number reflectedin the heading text.

8 A new chapter has been added, chapter 5, to cover general process equipment design of equipmentbeing used in many of the systems, such as separators, scrubbers and heat exchangers. A lot of minor changes throughout the document based on incoming comments to the previous STANDARD P-100 Rev. 2, November 2001 NORSOK standardPage 7 of 1281 ScopeThis NORSOK STANDARD defines the minimum functional requirements for process systems on an Normative referencesThe following standards include provisions which, through reference in this text, constitute provisions of thisNORSOK STANDARD .

9 Latest issue of the references shall be used unless otherwise agreed. Other recognizedstandards may be used provided it can be shown that they meet or exceed the requirements of thestandards referenced RP 520 design and installation of pressure relieving systems in RP 521 Guide for pressure relieving and depressurising 2000 Venting Atmospheric and low-pressure Storage TanksAPI RP 14 CAnalysis, design , Installation and Testing of Basic Surface Safety Systems onOffshore Production Platforms.

10 (New revision of ISO 10418 to be used, when issuedin 2002).ISO 15663 Petroleum and natural gas industries - Life cycle costing - Part 1: MethodologyNAS 1638 Cleanliness requirements of parts used in hydraulic systems. National AerospaceStandard, P-001 Process designNORSOK S-001 Technical safetyNORSOK S-002 Working environmentNORSOK S-003 Environmental CareNORSOK Z-DP-002 Coding system (Z-002)TEMA standards of Tubular Exchanger Manufacturers Definitions and DefinitionsNormative referencesShall mean normative in the application of NORSOK referencesShall mean informative in the application of NORSOK is an absolute requirement which shall be followed strictly, in order toconform with the is a recommendation.