Transcription of Nozzle Insulator Caps - PPE
1 Nozzle Insulator CAPSSIMPLE BUT EFFECTIVEDEVELOPED BY A PLASTICSMOLDER FOR USE BYPLASTIC MOLDERS!. Nozzle INSULATORS: Reduce heat transfer between Nozzle and spruebushing from 30 to 40 F. Permit lower Nozzle operating temperatures to avoidoverheating. Lower Nozzle temperatures to reduce meltdiscoloration. Lower Nozzle temperatures to stop drooling. Lower Nozzle temperatures to improve molded partquality. Reduce the need to turn up Nozzle heats tocompensate for draw from cool sprue bushing. Shorten cycles due to faster sprue set-up. Improve seal between Nozzle and sprue Insulator CAPS1/2" RADIUS, PART NO.
2 NIC-1210-49 Pcs .. $.68 +..$.61 " RADIUS, PART NO. NIC-3410-49 Pcs .. $.84 +..$.75 ea. PRICES 1173 INSTALLS EASILY 1. Place Insulator cap on clean sprue bushing tab helps center cap. A small spot of greaseon the outside diameter of cap radius will help hold itin Bring the Nozzle in place against the sprue bushingand begin molding. Your first shot will have the taband orifice material embedded in the runnerless systems or hot sprue bushings wesuggest you drill out the Insulator cap center to matchyour orifice size. This eliminates blocking your meltpassages with the high temperature Insulator capmaterial.
3 MADE OF super HI-TEMP VECTRA LCPPLASTICS WITH A MINERAL & GLASSADDITIVE. TENSILE STRENGTH 2400 SOFTENS @ 520 F MELTS @ 635 F .025 WALL THICKNESS AVAILABLE IN 1/2 or 3/4 RADIUS8303 CORPORATE PARK DRIVE, MACEDONIA (Cleveland), OHIO 44056, USA216-367-7000 Toll Free: 800-321-0562 Fax: 216-367-7022 Order Fax: 800-223-83056385 Montessouri Street, Las Vegas, Nevada 89113702-433-6385 800-258-8877 Fax: 702-433-638811218 Challenger Avenue, Odessa, Florida 33556727-834-8888 800-282-6783 Fax: 727-834-8873 Toll Free: USA, Canada & Mexico800-362-0706 PLASTIC PROCESS EQUIPMENT, e-mail: E S TPPESOUTHISO-9002 MANUFACTURED IN AQUALITY SYSTEM USE BETWEEN NOZZLES AND SPRUE BUSHINGSREDUCES HEAT TRANSFER
