performs for you. - Herman Miller

1 HermanMiller Aeron ChairAdjustment Guide1 Seating that performs for ChairTo raise: While taking your weight off chair, lift lever up. To lower: While seated, lift lever the proper height, your feet should rest flat on the Height: Paddle-shaped lever on right sideTo increase tension: While seated, turn knob forward (clockwise, toward + sign). To decrease tension: While seated, turn knob backward (counterclockwise, toward sign).Set the tilt tension to control the resistance you feel when leaning Tilt Tension: Long stem on right side with knobOnly available on some swing arms in or out: While seated, grasp front end of armpad and pivot it to the left or arm angle can help support different types of work and shifts in posture.

2 Swing chair arms inward for support while using keyboard. Swing arm out to support use of computer Angle: Front of each armpadTo raise or lower arm: While seated, lift lever to unlock. Grasp base of arm support and raise or lower to desired height. Lower lever to lock. For maximum comfort, your arms should make contact with the armpad without any lift at your shoulders. Arm Height: Lever on base of arm supportHermanMiller Aeron ChairAdjustment Guide2To position chair forward: Lean back and lift lever all the way up. Lean forward. To resume horizontal position: While seated, push lever all the way down. Lean forward tilt to support the thighs declined posture when performing intensive tasks such as Tilt: Front lever on left sideTo limit tilt range: Recline as far as you like.

3 Move lever up to define the limit of recline. You can still move forward. Readjust as release tilt limiter: Lean forward, press lever the tilt limiter when you want to sit in an upright or partially reclined Limiter: Rear lever on left sideTo adjust depth: Using equal pressure on each end of lumbar support pad, lift it out of its track in back of chair. Flip it over and replace in track. (Notice that one side of support pad is thicker than the other side.)Switch between thick and thin sides of the pad so that it comfortably supports the natural curve of your Depth: Thick pad on back of chairTo change height: Using equal pressure on each end of lumbar support pad, raise or lower it to desired position within adjustment pad height so that it comfortably supports the natural curve of your Height: Thick pad on back of chairTo raise: While seated, lift your feet off the footring, turn knob forward.

4 To lower: While seated, lift your feet off the footring, turn knob the proper height, your feet should rest flat on the Footring Height: Long stem on left side with knobOnly available on some engage: While seated, turn knob forward until it stops. Then turn knob backward until you find the support that feels right for disengage: While seated, turn knob : Set PostureFit with tilt limiter engaged in forward position to achieve the best fit for you. Before making this adjustment , you should be seated with your back in the pocket of the chair back. Then adjust PostureFit so that it comfortably supports the natural alignment of your spine and provides lower back adjustment : Knob on right side of chair