PETAMO GHY 133 N - יאיר ארז בע''מ

1 Print CIElementsprintGrafixPETAMO GHY 133 N, Art-No. 094061, enEdition [replaces edition ] Benefits for your application Reduced maintenance due to lifetime lubrication Wide service temperature range allows a variety of applications Reliable operation and long service life due to excellent protection against wear and corrosion, especially in waterpump bearings and clutch release bearingsDescriptionPETAMO GHY 133 N is a high-performance lubricating grease forrolling bearings subject to high temperatures. It has the followingadvantages: Resistance to high temperatures High resistance to oxidation Efficient wear protection even at high temperatures Good corrosion protection Good water resistance The high performance level of PETAMO GHY 133 N is achievedby means of selected product constituents such as polyureathickener, mineral oil, synthetic hydrocarbon oil and additives, aswell as the production GHY 133 N is suitable for long-term and lifetimelubrication in a variety of applications including.

2 Rolling bearings in electric motors fan heaters drying installations textile machines paper machines Automotive components, belt tensioning rollers (rotating outer ring) couplings water pumps fans wheel bearings In component tests PETAMO GHY 133 N achieves excellentresults in terms of service life. In water pump bearings PETAMO GHY 133 N offers excellentcompatibility with coolants containing notesPETAMO GHY 133 N can be applied by means of appropriateautomatic or conventional lubrication systems in a clean workingenvironment. Material safety data sheetsMaterial safety data sheets can be downloaded or requested viaour website You may also obtain themthrough your contact person at Kl ber GHY 133 NLong-term and high-temperature grease for rolling bearingsProduct informationPack sizes PETAMO GHY 133 NCartridge 400 g+Can 1 kg+Bucket 25 kg+Drum 180 kg+Product dataPETAMO GHY 133 NArticle number094061 Lubricating greases -K, DIN 51825 in connection with DIN 51502 KHC2P-30 Chemical composition, type of oilsynthetic hydrocarbon oil Chemical composition, type of oilmineral oil Chemical composition.

3 Thickenerpolyurea Lower service temperature-40 C / -40 FUpper service temperature160 C / 320 FColour spacebrown Density at 20 Capprox. g/cm Worked penetration, DIN ISO 2137, 25 C, lower limit value 265 x mmWorked penetration, DIN ISO 2137, 25 C, upper limit value 295 x mmKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 Capprox. 165 mm /sKinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 Capprox. 18 mm /sCorrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1week, distilled water<= 1 corrosion degreeDrop point, DIN ISO 2176>= 250 CFlow pressure of lubricating greases, DIN 51805, test temperature: -30 C<= 1 400 mbarTesting of lubricating greases on FAG FE9 rolling bearing tester, DIN 51821 pt.

4 02, speed:6000min-1, axial load:1500 N, temperature: 160 C, service life F50:>= 100 hLow-temperature torque, IP 186, -40 C, running<= 250 mNmLow-temperature torque, IP 186, -40 C, start<= 1 000 mNmSpeed factor (n x dm) approx. 500 000 mm/minMinimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopenedoriginal container, monthsCompatibility with elastomers and plasticsThe following elastomers were tested for resistance to PETAMOGHY 133 N over a period of 168 hours at 100 or 130 listed values are the results of sample testing with PETAMOGHY 133 N, closely related to DIN 53521, and are not subject toregular revision. The stated values serve for orientation only andmay vary according to the material used and the pretreatment ithas undergone.

5 Fixed product data cannot be derived from thetest data. PETAMO GHY 133 NLong-term and high-temperature grease for rolling bearingsProduct informationPETAMO GHY 133 N, Art-No. 094061, enEdition [replaces edition ] Owing to the many different elastomer compositions werecommend checking their compatibility on the completecomponent prior to series temperature75 FKM 585130 C72 NBR 902100 C70 ACM 121433130 CChange in volume (%), approx.+ 1+ 6+ 7 Change in hardness (SHA), 1- 2- 8 Tensile strength (%), 10+ 5- 11 Elongation at tear (%), 4- 11+ 10Kl ber Lubrication your global specialistInnovative tribological solutions are our passion. Throughpersonal contact and consultation, we help our customersto be successful worldwide, in all industries and our ambitious technical concepts and experienced,competent staff we have been fulfilling increasinglydemanding requirements by manufacturing efficient high-performance lubricants for more than 80 ber Lubrication M nchen SE & Co.

6 KG /Geisenhausenerstra e 7 / 81379 M nchen / Germany /phone +49 89 7876-0 / fax +49 89 data in this document is based on our general experience and knowledgeat the time of publication and is intended to give information of possibleapplications to a reader with technical experience. It constitutes neither anassurance of product properties nor does it release the user from theobligation of performing preliminary field tests with the product selected for aspecific application. All data are guide values which depend on the lubricant'scomposition, the intended use and the application method. The technicalvalues of lubricants change depending on the mechanical, dynamical, chemicaland thermal loads, time and pressure.

7 These changes may affect the functionof a component. We recommend contacting us to discuss your specificapplication. If possible we will be pleased to provide a sample for testing onrequest. Kl ber products are continually improved. Therefore, Kl berLubrication reserves the right to change all the technical data in this documentat any time without and Copyright: Kl ber Lubrication M nchen SE & Co. KG. Reprints,total or in part, are permitted only prior consultation with Kl ber LubricationM nchen SE & Co. KG and if source is indicated and voucher copy company of the Freudenberg GroupPETAMO GHY 133 NLong-term and high-temperature grease for rolling bearingsProduct informatio