Example: confidence

PLE‑1MExx0‑xx Plena Mixer Amplifier

Communications Systems | PLE 1 MExx0 xx Plena Mixer AmplifierPLE 1 MExx0 xx Plena Mixer Amplifier u4 microphone / line inputs, plus music source inputuAnnouncement only output, 3 wire volume overrideuWide range of output power (60, 120 and 240 Watts)u2 tone chimeThese Plena Economy Mixer amplifiers areprofessional public address units with modernstate of the art features. They are easy to use, takingthe complexity away from the user and putting itwhere it belongs, inside the equipment. Providing acrisp call or clear music is as easy as turning on theradio.

Max / rated PLE-1ME240‑xx 360 W / 240 W Loudspeaker output 4 ohm Connector Screw terminal, floating PLE-1ME060-xx 15.5 V (60 W) PLE-1ME120-xx 22 V (120 W) PLE-1ME240-xx 31 V (240 W) Mechanical Dimensions (H x W x D) 100 x 430 x 270 mm (19" wide, 2U high) Mounting Stand-alone, 19" rack Color Charcoal Weight PLE-1ME060-xx Approx. 6.5 kg

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Transcription of PLE‑1MExx0‑xx Plena Mixer Amplifier

1 Communications Systems | PLE 1 MExx0 xx Plena Mixer AmplifierPLE 1 MExx0 xx Plena Mixer Amplifier u4 microphone / line inputs, plus music source inputuAnnouncement only output, 3 wire volume overrideuWide range of output power (60, 120 and 240 Watts)u2 tone chimeThese Plena Economy Mixer amplifiers areprofessional public address units with modernstate of the art features. They are easy to use, takingthe complexity away from the user and putting itwhere it belongs, inside the equipment. Providing acrisp call or clear music is as easy as turning on theradio.

2 Offering the essentials of public address in anaffordable and line inputsAll Mic/line inputs can be switched betweenmicrophone level and line level sensitivity. The inputsare balanced but can be used unbalanced. Phantompower can be switched on to provide power tocondenser microphones. Input channel 1 can take priority over all othermicrophone and music inputs: Input 1 can be activated by contact closure on thePTT (push to talk). A 2-tone chime can be configuredto precede an inputA separate music input is available with its settingsMore unique features are available such as adetachable label where the user can write the namesfor inputs.

3 This label can then be mounted on thefront, protected by the clear useful feature is to indicate preferred settingson the front panel by inserting colored pins at thepreset levels of all knobs. You can then instruct a userto set all the controls to the silver pins to configurethe system for their particular use. A second user canset all controls to the red pins for their Mixer amplifiers come in 60, 120 and 240 Wattoutput power. This power is directly available on 100 V(70 V for US versions) constant voltage connectionsand on a low impedance connection for a 4 ohm , the amplifiers have a separate 100 V (70 Vfor US versions) call-only output channel foraddressing areas where only priority announcementsare required.

4 The call-only output can also be used for3-wire remote, volume control statusAn LED VU meter monitors the master output. Aheadphone socket, below the VU meter, provides themixer output. For total reliability and ease of use, alimiter is integrated into the output stage to restrictoutput if the user applies too much and indicatorsFront On/off switch Power on LED LED VU meter for master output (LEDs for -18, -12 -6,-3, 0 dB) Master volume knob Four volume knobs for microphone inputs Volume knob for background music Knob for treble level Knob for bass level Headphone socket Back Dip switchesCertifications and approvalsSafetyacc.

5 To EN 60065 EMC emissionacc. to EN 55103 1 EMC immunityacc. to EN 55103 2 Parts includedQuantityComponents1 PLE-1 MExx0 xx Plena Mixer Amplifier1 Power cord1 Manual1 Plena Easy Line CDTechnical specificationsElectricalMains power supply Voltage -EU versions230 VAC 10%, 50/60 Hz(reduced power at lower mainsvoltage)Voltage -CN versions220 VAC 10%, 50/60 Hz(reduced power at lower mainsvoltage)Voltage -US versions120 VAC 10%, 50/60 Hz(reduced power at lower mainsvoltage)Inrush currentPLE 1ME060 EU or -CN5 AInrush currentPLE 1ME120 EU or -CN10 AInrush currentPLE 1ME240 EU or -CN12 AInrush current PLE 1ME060 US10 AInrush current PLE 1ME120 US20 AInrush current PLE 1ME240 US24 APower consumption PLE 1ME060 xx200 VAPLE 1ME120 xx400 VAPLE 1ME240 xx800 VAPerformance Frequency response (Line)60 Hz to 20 kHz (+1/ 3 dB @ 10 dB ref.)

6 Rated output)Frequency response (Mic.)70 Hz to 20 kHz (+1/ 3 dB @ 10 dB ref. rated output)Distortion<1% @ rated output power, 1 kHzBass ControlMax. 8 dBTreble ControlMax. 8 input4 xInput 1 (push-to-talk contactwith priority)5 pin Euro style, balanced,phantomInput 23 pin Euro style, balanced,phantomInput 3 and 4 TRS Jack (1/4, ) balancedSensitivity1 mV (mic.); 300 mV (line)Impedance>1 kohm (mic.); >5 kohm (line)Dynamic range93 dBS/N (flat at max volume)>63 dB (mic.); >70 dB (line)S/N (flat at min volume/muted)>75 dBCMRR (mic.)>40 dB (50 Hz to 20 kHz)Headroom>25 dBSpeech filter-3 dB @ 315 Hz, high-pass,6 dB/octPhantom power supply16 V via kohm (mic.

7 Music input ConnectorCinch, stereo converted to monoSensitivity200 mVImpedance22 kohmS/N (flat at max volume)>75 dBS/N (flat at min volume/muted)>80 dBHeadroom>25 dB2 | PLE 1 MExx0 xx Plena Mixer AmplifierLoudspeaker outputConnectorScrew terminal, floatingMax / rated PLE-1ME060 xx90 W / 60 WMax / rated PLE-1ME120 xx180 W / 120 WMax / rated PLE-1ME240 xx360 W / 240 WLoudspeaker output 4 ohm ConnectorScrew terminal, V (60 W)PLE-1ME120-xx22 V (120 W)PLE-1ME240-xx31 V (240 W)MechanicalDimensions (H x W x D)100 x 430 x 270 mm(19" wide, 2U high)MountingStand-alone, 19" rackColorCharcoalWeight PLE-1ME060-xxApprox.

8 Kg PLE-1ME120-xxApprox. kg PLE-1ME240-xxApprox. kgEnvironmentalOperating temperature-10 C to +45 CStorage temperature-40 C to +70 CRelative humidity<95%Acoustic noise level of fan(PLE-1ME240-xx)<48 dB SPL @ 1 m Ordering informationPLE 1ME060 EU Plena Mixer AmplifierMixer Amplifier , 60 W, 4 microphones and backgroundmusic (BGM) number PLE-1ME060-EUPLE 1ME120 EU Plena Mixer AmplifierMixer Amplifier , 120 W, 4 microphones andbackground music (BGM) number PLE-1ME120-EUPLE 1ME240 EU Plena Mixer AmplifierMixer Amplifier , 240 W, 4 microphones andbackground music (BGM)

9 Number PLE-1ME240-EUPLE 1ME060 US Plena Mixer AmplifierMixer Amplifier , 60 W, 4 microphones and3 background music (BGM) inputs. US number PLE 1ME060 USPLE 1ME120 US Plena Mixer AmplifierMixer Amplifier , 120 W, 4 microphones and3 background music (BGM) inputs. US number PLE 1ME120 USPLE 1ME240 US Plena Mixer AmplifierMixer Amplifier , 240 W, 4 microphones and3 background music (BGM) inputs. US number PLE 1ME240 USPLE 1ME060 CN Plena Mixer AmplifierMixer Amplifier , 60 W, 4 microphones and 3background music (BGM) inputs. Chinese number PLE 1ME060 CNPLE 1ME120 CN Plena Mixer AmplifierMixer Amplifier , 120 W, 4 microphones and 3background music (BGM) inputs.

10 Chinese number PLE 1ME120 CNPLE 1ME240 CN Plena Mixer AmplifierMixer Amplifier , 240 W, 4 microphones and 3background music (BGM) inputs. Chinese number PLE 1ME240 CN 3 | PLE 1 MExx0 xx Plena Mixer Amplifier4 | PLE 1 MExx0 xx Plena Mixer AmplifierRepresented by:Americas:Europe, Middle East, Africa:Asia-Pacific:China:America Latina:Bosch Security Systems, Portland Avenue SouthBurnsville MN 55337, USAP hone: +1-800-392-3497 Fax: Security Systems Box 800025617 BA Eindhoven, The NetherlandsPhone: + 31 40 2577 284 Fax: +31 40 2577 Bosch (SEA) Pte Ltd, SecuritySystems11 Bishan Street 21 Singapore 573943 Phone: +65 6571 2808 Fax.


Related search queries