PROFESSIONAL AUDIO & SOUND Installation …

1 Copyright Paso SOUND Products, Inc. 2003 Specifications are subject to change without noticeInnovation through technology since 1931 LISTEDCOMMERCIALAUDIOEQUIPMENT30 TJInstallation Manualand Operating Instructions7 Channel - 3 Zone - Dual VOX -Dual Mute - MOH - Vox Relay -Module Port - Phone InterfaceTTOO RREEDDUUCCEE TTHHEE RRIISSKK OOFF FFIIRREE OORR EELLEECCTTRRIICCSSHHOOCCKK DDOO NNOOTT EEXXPPOOSSEE TTHHIISS AAPPPPLLIIAANNCCEE TTOOWWAATTEERR,, RRAAIINN OORR MMOOIISSTTUURREECAUTION !REV. NOTE:THIS OPERATING MANUAL IS PROVIDED AS AN Installation ANDAS AN OPERATING AID.

2 PASO SOUND PRODUCTS, INC. DOES NOT ASSUME ANYRESPONSIBILITY AS TO ITS ACCURACY AND SHALL NOT BE LIABLE IN TORT OR CON-TRACT FOR ANY DIRECT CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE ARISINGFROM THE Installation , USE OR INABILITY TO USE THIS 33004400 -- 4400 WWaatttt RRMMSSDDMMSS 33008800 -- 8800 WWaatttt RRMMSSDDMMSS 33112200 -- 112200 WWaatttt RRMMSSTMDIGITAL MUSIC SERIESPROFESSIONAL AUDIO & SOUND SeriesDMSI ntegrated AmplifiersManualOOMM116633 DDiiggiittaall MMuussiicc AAmmpplliiffiieerrssTMDIGITAL MUSIC SERIESDESCRIPTION AND APPLICATIONSSPECIFICATIONSPAGE 2 copyright Paso SOUND Products, Inc.

3 2002 Specifications are subject to change without noticeDMS3040/3080/3120 power Output:DMS3040 DMS3080 DMS3120 Distortion:Frequency Response:Inputs:Input 1 Input 2 Input 3 Input 4 Input 5 Input 6 Input 7 Sensitivity & Z:Input 1 Input 2 Input 3 Input 4 Input 5 Input 6 Input 7 AUX 1 InputAttenuator:AUX 2 InputAttenuator:Phantom power :Hum & Noise:Telephone Paging Input:Accessory Port:EQ LINK:Line Outputs:Inputs/Outputs:Subwoofer Outputs:Subwoofer Output Level:Music on Hold Output:Zone 2 Output:Zone 3 Output:Main Output Impedance:Controls:Front Panel:Rear Panel:Bass and Treble Controls:Tone By-Pass:Remote Volume Controls:MOH Source Selection:Zone 2/3 Source Selection:DUAL VOX:VOX BUSS 1:VOX BUSS 2:MUTE BUSS 1:MUTE BUSS 2:MUTE 2 DELAY:Unmuting: power Supply Output:Auto VOX Relay:Rack Mounting:Internal Cooling Fan: power Requirement: power Consumption:AC Accessory Outlet:Terminations:Housing Finish:Output power Indicator:Dimensions:Net Weight.

4 DMS3040 DMS3080 DMS3120 UNPACKINGI mmediately upon receipt of the amplifier, inspect the unitand shipping container for indications of improper handlingor in transit damage. The equipment was carefully inspect-ed and tested before leaving the factory. Notify theTransportation Company immediately if any damage isfound. ONLY THE CONSIGNEE CAN FILE A CLAIM WITHTHE CARRIER FOR DAMAGE DURING SHIPMENT. Besure to save the carton and packing material as evidence ofdamage for the shipper inspection. DO NOT SHIP the unitback to the factory unless authorized by the TRANSIT DAMAGES ARE NOT COVERED BY THEPASO Watt RMS80 Watt RMS120 Watt RMSLess than THD20 - 20,000 Hz 1 dbMicrophone 1 BalancedMicrophone 2 BalancedMicrophone 3 BalancedMicrophone 4 Balanced - AUX 1 (Stereo Summing)Microphone 5 Balanced - AUX 2 (Stereo Summing)

5 Telephone Interface - Transformer BalancedModule PortMic 1 = Mv - 250 ohmMic2 = Mv - 250 ohmMic 3 = Mv - 250 ohmMic 4 = Mv - 250 ohm - AUX 1 = 100 Mv - 47 KohmMic 5 = Mv - 250 ohm - AUX 2 = 100 Mv - 47 KohmTe l=100 Mv - 600 ohm - Transformer BalancedModule= 1 V - 47K ohmVariable (rear panel control)Variable (rear panel control)All Microphone Inputs by internal jumper (18 V)Mic-70 db, Aux-75 db 600 ohm Transformer balancedAccepts Standard ModulePreamp out, power Amp in with EQ Link SwitchLine Out 600 ohm - V loadedMIX BUSSPre-EQ and Post-EQ Outputs1 Volt600 ohm-1 Volt Transformer Balanced1 Watt-8 ohm with Control1 Watt-8 ohm with Control8 ohm, 25 Volt and 70 Volt lineInput 1 Level, Input 2 Level, Input 3 Level, Input 4 Level, Input 5 Level, Module Level.

6 Bass and TreblePHONE Level - AUX 1 Attenuator - AUX 2 Attenuator- MOH/ZONE 1 Level Control - ZONE 2 Level Control- VOX 1/VOX 2 Sensitivity - MUTE 2 Delay 10 dB at 100 Hz and 10 KHzOn - Off Switch (rear panel)AUX 1 Input Level and Master Volume (10 K)AUX 1 - AUX 2 - MODULE by internal jumperAUX 1 - AUX 2 - MODULE by internal jumperVoice Activated MutingAvailable on all 7 Inputs by internal jumpersAvailable on all 7 Inputs by internal jumpersAvailable on all 7 Inputs by internal jumpersAvailable on all 7 Inputs by internal jumpersAdjustable from 3 Sec to 30 Sec (rear panel control)

7 MUTES/UNMUTES MIC 1 only24 V DC - 250 mA RegulatedNO/NC Contacts - VOX activated - Contacts Rating =30 VDC - 7 AOptional Model 27/3501 - 19 Rack Kit3 Thermally Controlled - Model DMS3120 only117 Volt, 50-60 HzDMS3040= AC = 630 VA - DMS3080= 750 VA -DMS3120= 850VA W Max. UnswitchedScrew Terminals, RCA JacksBlackMulti-color LED (front panel)19 W., 12 D., 4 H. with feet (482X305X102 mm) H (89 mm). less feet16 Lbs (8 Kg)19 Lbs ( Kg)22 Lbs (11 Kg) High Performance - High Reliability Design Wide Frequency Response - Very Low Distortion 7 Channel Inputs - 3 Zone Outputs 5 Balanced Microphone Inputs Phantom power on all MIC Inputs MIC 4/AUX 1 and MIC 5/AUX 2 InputsWith Stereo Summing AUX1 and AUX2 Inputs Attenuator 600 ohm Transformer BalancedTelephone Paging Input MIX Buss and 600 ohm Line Output Independent Input Controls Rear Panel Port.

8 Accepts Standard Module Independent Module Level Control AUX1 and Master Remote Volume Controls External EQ Link Tone by-pass and EQ Link switches Pre-EQ Subwoofer Output Post-EQ Subwoofer Output Addressable Dual VOX BussVoice Activated Muting VOX Variable Time Delay Function Addressable Dual MUTE Buss Direct Muting and Unmuting 600 ohm and 8 ohm 1 WattMusic on Hold Amplifier MOH Amplifier Source Selector Zone 2 and 3, 1 Watt - 8 ohm Outputwith Separate Control NO/NC VOX Operated Relay 24 V DC 250 mA Regulated power Supply Output 8 ohm, 25 Volt & 70 Volt Output Optional 19 Rack Mounting with Kit Low profile - 2-Unit of Vertical Rack space UL 6500 Listed (US - CANADA) PROFESSIONAL AUDIO & SOUND TMDIGITAL MUSIC SERIESDIGITAL MUSIC AMPLIFIERSPAGE 3 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICEDMS3040/3080/3120 RACK MOUNTINGA) Procure the optional accessory Rack Mount Kit Model 27 ) Turn amplifier up side down and remove the four rubber feet by unscrewing the four holding ) Remove two screws on each side of the amplifier holding the amplifier )

9 Install the rack kit brackets by using the self-tapping screws MUSIC AMPLIFIEROPOWERPROFESSIONAL AUDIO & SOUNDDIGITAL MUSIC SERIESDMSDMSTMOUTPUT LEVELPEAKINPUT 1 INPUT 2 INPUT 3 INPUT 4/AUX 1 INPUT 5/AUX 2 BASSTREBLEMODULE100100100100100100+10-10 +10-10 Fig. 3 - Rack Kit MountingREAD BEFORE OPERATING READ BEFORE OPERATING BEFORE OPERATING THE AMPLIFIER, BE SURE YOUFULLY UNDERSTAND ALL INSTRUCTIONS AND FEA-TURES OF THE )Read these instructions )Keep these )Heed all )Follow all ) DO NOTuse this apparatus near )Clean ONLY with a damp ) DO NOTblock any of the ventilation in accordance with the instructions ) DO NOTinstall near any heat sources such asradiators, stoves, or other apparatus (including ampli-fiers) that produce )

10 DO NOTmount amplifier into a container or aclosed unventilated closet while ) DO NOTplace any object or accessory equipmentsuch as Tuners, Mixers, Cassette Decks, etc. on top ofthe amplifier. Obstructing or closing the cabinet venti-lation openings may cause ) DO NOTdefeat the safety purpose of the polar-ized or grounding type plug. A polarized plug has twoblades with one wider than the other. A grounding typeplug has two blades and a third grounding prong. Thewide blade and or the third prong is provided for yoursafety. When the provided plug does not fit into youroutlet, consult an electrician for replacement of theobsolete )Use only the attachments and accessories speci-fied in this )If a cart is used, use caution when moving thecart/apparatus combination to avoid injury from )Unplug this apparatus during lighting storms orwhen unused for long periods of )