Transcription of Pump Expansion Tanks - A. O. Smith
1 Pump & Expansion TanksPage 1 of 4 AOSEB55100 August 2016 A. O. Smith Corporation. All Rights | 800-527-1953 Toll-Free USA | A. O. Smith Corporation | 500 Tennessee Waltz Parkway | Ashland City, TN 37015 NON-CORROSIVE METAL AIR VALVE100 PSI WORKING PRESSUREMULTIPLE HEAD CONSTRUCTION Provides added structural strength and more capacity within the same POWDER COATING Permanently bonded to the tank shell to provide the ultimate protection on the water side of the BUTYL RUBBER PARABOLIC DIAPHRAGM Ensures long life. Prevents rubbing on tank wall or rolling over on LOCK RETENTION SYSTEM Quality controlled compression in the diaphragm connection eliminates loss of air or water leaks in the APPLIED POWDER COATED EXTERIOR Tough powder coating provides maximum resistance to sunlight (UV) and is undercoated with zinc phosphate for the highest corrosion STEEL BASE5-YEAR LIMITED WARRANTY For complete information, consult written warranty or go to TANK FEATURESPUMP TANKSPump & Expansion TanksPage 2 of 4 AOSEB55100 August 2016 A.
2 O. Smith Corporation. All Rights | 800-527-1953 Toll-Free USA | A. O. Smith Corporation | 500 Tennessee Waltz Parkway | Ashland City, TN 37015 DRAWN STEEL CONSTRUCTIONHEAVY DUTY BUTYL RUBBER DIAPHRAGMMAXIMUM WORKING PRESSURE 150 PSI - POTABLE ONLY100 PSI MAX - HYDRONIC ONLYPOWDER COATED INTERIOR AND FITTINGDRAWN STEEL CONSTRUCTIONPOTABLE & HYDRONIC Expansion TANK FEATURESPOTABLE & HYDRONIC Expansion TANKSAPPLIES TO POTABLE WATER Expansion Tanks ONLYWhen Used in Potable ApplicationsPage 3 of 4 AOSEB55100 Note: M-Male ConnectionF-Female ConnectionAll models 38 psi pre-chargePUMP TANK SPECIFICATIONS Max working pressure 100 psiPump & Expansion TanksModel NumberVolume (Gallons)Connecting NPT SizeDimensions in InchesWeight (lbs.)A-Overall Height To Center of Water Inlet B-Diameter PMI (Inline) and PM (Free-Standing) (M)10-3/16-8-1 (M)14-3 (M)21-1 (M)21-1/16215-3 (F)24-15/16215-3 (F)32-3/8215-3 (F)39-9/16215-3 (F)47-1/4215-3 (F)36-9/162-1 (F)48-5/82-1 (F)60-11/162-1 (F)462-1 (F)61-5/162-1/226161 Horizontal (M)12-7 (M)18-1/4-15-3 (M)18-1/4-15-3/836 August 2016 A.
3 O. Smith Corporation. All Rights | 800-527-1953 Toll-Free USAFor Technical Information, call 800-527-1953. A. O. Smith Corporation reserves the right to make product changes or improvements without prior 4 of 4 AOSEB55100 PMC-10 is 38 psi pre-chargeAll PMET Models are 12 psi pre-chargeModel NumberMaximum (PSIG) Working PressureTank Volume (Gallons)Maximum Accepted Volume (Gallons)Connection NPT SizeDimensions in InchesWeight (lbs)20 PSI40 PSI60 PSIO verall Height Diameter PMC-Series (Potable Expansion Tanks - 5-Year Limited Warranty) 3/415-1/215-3/818 PMET-Series (Hydronic Expansion Tanks - 1-Year Limited Warranty) 1/210-3/168-1 1/214-3 1/221-1 1/223-1/215-3/825 Expansion TANK SPECIFICATIONSPump & Expansion Tanks August 2016 A. O. Smith Corporation. All Rights | 800-527-1953 Toll-Free USAFor Technical Information, call 800-527-1953.
4 A. O. Smith Corporation reserves the right to make product changes or improvements without prior notice.
