1 KDC-152. CD-RECEIVER. instruction manual . AMPLI-TUNER LECTEUR DE CD. MODE D'EMPLOI. REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM. manual DE instrucciones . Take the time to read through this instruction manual . Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model KDC-152 Serial number US Residents Only Register Online Register your Kenwood product at 2011 Kenwood Corporation All Rights Reserved.
2 GET0740-001A (KW/K0). Cover_KDC-152[K] 1 5/30/11 4:06:13 PM. CONTENTS Safety Safety 2 WARNING. Stop the car before operating the unit. Preparation 3. Important to How to attach/detach the faceplate To prevent a short circuit, never put or How to reset your unit leave any metallic objects (such as coins or How to prepare the remote controller metal tools) inside the unit. (RC-405). Caution: Adjust the volume so that you Basic operations 4 can hear sounds outside the car. Driving with the volume too high may cause an Getting started 6 accident. Canceling the display demonstration Condensation: When the car is air- Setting the demonstration mode conditioned, moisture may collect on the Adjusting the clock laser lens. This may cause disc read errors.
3 Initial settings before operations In this case, remove the disc and wait for the moisture to evaporate. Listening to the radio 7 This unit can only play the CDs with: Adjust [SETTINGS] mode settings Listening to a disc 8 The illustrations in this manual are Selecting Repeat Play examples used to explain more clearly Selecting Random Play how the controls are used. Therefore, what Selecting Scan Play appears on the illustrations may differ from Selecting a folder/track/file what appears on the actual equipment. Direct Music Search using the remote If you experience problems during controller (RC-405) installation, consult your Kenwood dealer. When you purchase external components, Listening to the other external check with your Kenwood dealer to make components 9 sure that they work with your model and in your area.
4 Function settings 10 Detailed information and notes about the playable audio files are stated in an online Troubleshooting 11 manual on the following site: Installation/connection 12. Basic procedure Warning Caution Wiring connection Installing the unit Specifications 15. 2. EN02-15_KDC-152[K] 2 5/6/11 3:01:28 PM. Preparation ENGLISH. How to attach/detach the faceplate How to prepare the remote controller (RC-405). When you use the remote controller for the 1 first time, pull out the insulation sheet. 1. 2 Insulation sheet 2. Do not expose the faceplate to direct sunlight, excessive heat, or humidity. Also avoid places with too much dust or the If the effectiveness of the remote possibility of water splashing. controller decreases, replace the battery.
5 The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. 3. 2. To prevent deterioration, do not touch the terminals of the unit and faceplate with 4. your fingers. 1. How to reset your unit CALIFORNIA, USA ONLY. If this unit fails to operate properly, press the This perchlorate WARNING applies only reset button. to the product sold or distributed in California USA Perchlorate Material special The unit returns to factory handling may apply, See settings when the reset hazardouswaste/perchlorate.. button is pressed. Caution: Reset button Do not set the remote control in hot places such as on the dashboard. Lithium battery. Discs that cannot be used Danger of explosion if the battery is Discs that are not round. incorrectly replaced.
6 Replace only with the Discs with coloring on the recording same or equivalent type. surface or discs that are dirty. The battery pack or batteries shall not be You cannot play a Recordable/ReWritable exposed to excessive heat such sunshine, disc that has not been finalized. (For the fire or the like. finalization process refer to your disc Keep battery out of reach of children and in writing software, and your disc recorder original package until ready to use. Dispose instruction manual .) of used batteries promptly. If swallowed 3-inch CD cannot be used. Attempt contact physician immediately. to insert using an adapter can cause malfunction. 3. EN02-15_KDC-152[K] 3 6/8/11 2:35:22 PM. Basic operations Loading slot Ejects the disc Remote sensor Do not expose to bright sunlight.
7 Display window Volume knob Auxiliary input jack Detaches the faceplate The following indicator lights up ST: A stereo broadcast is received (FM). IN: A disc is in the unit. Maintenance Cleaning the unit: Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure to observe this precaution may result in damage to the monitor or unit. Cleaning the connector: The unit may not function properly if the connectors between the unit and faceplate are dirty. Detach the faceplate and clean the connector with a cotton swab gently, being careful not to damage Connector (on the reverse the connector. side of the faceplate). Handling discs Do not touch the recording surface of the disc. Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
8 Do not use any accessories for the disc. Clean from the center of the disc and move outward. Clean the disc with a dry silicon or soft cloth. Do not use any solvents. When removing discs from this unit, pull them out horizontally. Remove the rims from the center hole and disc edge before inserting a disc. 4. EN02-15_KDC-152[K] 4 6/9/11 10:05:44 AM. When you press or hold the following button(s).. ENGLISH. Remote Main unit General operation controller Turns on.. Turns off if pressed and held. Selects the available sources (TUNER, CD, AUX, STANDBY), if the SRC. power is turned on. SRC. If the source is ready, playback also starts. CD is selectable only when a disc is loaded. Volume knob VOL Adjusts the volume level. (turn) 5/ Selects items. Volume knob ENT Confirms selection.
9 (press) Enters [FUNCTION] settings. Selects the FM bands (FM1/ FM2/ FM3) or AM. BAND *AM / Selects the next/previous folder. (Pressing BAND on the main #FM+. unit can only select the next folders.). ENT Pauses/resumes playback of a disc. Mutes the sound while listening to a radio or an external . component connected to the auxiliary input jack. + Searches for a radio station. 4/ 4/ Selects track/file. Fast-forwards/reverses tracks if pressed and held. Changes the display information. Scrolls the display information if pressed and held. SCRL DISP . Enters clock adjustment mode directly (page 6) if pressed and held while in clock display screen. AUD Enters [AUDIO CTRL] settings directly. Attenuates the sound. ATT. To return to the previous level, press the button again.
10 Returns to the previous item. Exit from setting mode. EXIT Press and hold on the main unit will also exit from the setting mode. Muting upon the reception of a phone call To use this feature, connect the MUTE lead to your telephone using a commercial telephone accessory. (page 13). When a call comes in, CALL appears. When a call ends, CALL disappear. The audio system pauses. The audio system resumes. To continue listen to the audio system during a call, press SRC. CALL disappear and the audio system resumes. 5. EN02-15_KDC-152[K] 5 5/6/11 3:01:30 PM. Getting started Canceling the display Adjusting the clock demonstration 1 Press the volume knob to enter The display demonstration is always turned [FUNCTION] mode. on unless you cancel it. 2 Turn the volume knob to select [SETTINGS], then press to enter.