RUGGED TIGER EYE SYSTEMS

1 F-219 (Rev 23 JAN19) SFM 110 02 L D A. SFML 125 T2 L D LC. SFML 115 T2 L D LC. SFM 125 02 L SH. ( mm) .050". SMT & THROUGH-HOLE TIGER EYE SOCKET . Low insertion force SFM Board Mates: TIGER Eye contacts available SPECIFICATIONS TFM. ( mm x mm). For complete specifications and SFM Cable Mates: recommended PCB layouts .050" x .050" micro pitch see or TFSD, TFSS. SFML Board Mates: Insulator Material: TFML. Black Liquid Crystal Polymer Plating: Au or Sn over 50 " ( m) Ni Current Rating (SFM/TFM): A per pin (2 pins powered) Passes 10 Year Voltage Rating: MFG. 250 VAC mated with TFM. Operating Temp Range: Locking option -55 C to +125 C. Locking feature Locking clip option Insertion Depth: 10 YEAR MFG. increases unmating WITH 30 " GOLD Screw Down option ( mm) .120" to force (SFML). ( mm) .160" EXTENDED LIFE. Wiping Distance: PRODUCT. ( mm) .015" HIGH MATING Choice of SMT or HIGH-SPEED CHANNEL PERFORMANCE.

2 Normal Force: 8. CYCLES. Standard= 132 g ( N) avg.; through-hole tails Rating based on Samtec reference LIF= 90 g ( N) avg. channel. For full SI performance data Max Cycles: visit or contact 10,000 with 30 " ( m) Au G b p s (Call Samtec for . plating option). RoHS Compliant: TYPE NO. PINS. Yes STRIP 1 PER ROW LEAD STYLE. PROCESSING. Lead-Free Solderable: Yes (Surface Mount) (Through-hole). SMT Lead Coplanarity: 03, 04, 06, 08. ( mm) .004" max (05-25). ( mm) .006" max (30-50)* SFM (SFM only). 02 01, 03. *(.004" stencil solution = Standard = TIGER Eye Contact = TIGER Eye Contact may be available; contact 05, 07, 10, 15, 20, (BeCu) (BeCu). SFML 25, 30, 35, 40, 45, 50. RECOGNITIONS = Locking (Standard sizes) L2 L1, L3. = Low Insertion Force = Low Insertion Force For complete scope TIGER Eye Contact TIGER Eye Contact of recognitions see (BeCu) (BeCu). ( ) .050 x No.)

3 Of Positions + ( ) .015 ( )..070. ( ). 02. T2 T1. = TIGER Eye LITE Contact = TIGER Eye LITE Contact FILE NO. E111594 .095. (Phosphor Bronze) (Phosphor Bronze). 01 ( )..050 TYPSINGLE ROW ( ). ( ) .050 x No. of Positions + ( ) .155 .070 ( ) .385. except for alignment pin option: ( ) .050 x No. of Positions + ( ) .125 ( ). ( ) .080 ( ) .133. 02 .050. ( ) ( ) ( )..145 .120 .089. SH. 01 ( 02 only). ( ) .050 TYP ( ). ( ) DOUBLE ROW .023 ( ) ( ) .385..095 .145. ( ) ( ). ( ) .005 .120 ( )..185 ( ) TYP .183..110. ( ) ( ) ( )..020 ( ). Note: .125 .165 .089. Some sizes, styles and DH. options are non-standard, ( 02 only). non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.

4 SFM 120 L3 L D. SFM 110 01 L D A SFM 110 02 L D DS. SFM 105 L3 L D. SFML 115 T1 L D LC. SFM 115 02 L DH. SFM, SFML SERIES. Mates with TFM. for coplanar and perpendicular mating Screw down High-reliability option TIGER Eye . contacts Surface mount or Through-hole tails ( mm x mm)..050" x .050" micro pitch ALSO AVAILABLE. (MOQ Required). OTHER SOLUTIONS Solder nail option Lower cost plating options. Other sizes See SFC Series. Other platings ROW OPTION. PLATING OPTION OPTION. L S Specify only A, LC or DS Specify only = 10 " ( m) Gold on contact, Matte Tin on tail = Single Row (Not available with DH, SH) K or P. (Call Samtec for plating option) (SFM only) A (Lead styles 02, L2, T2 only). = Alignment Pin D (Available with all lead styles) K. LEAD STYLE A B = Double Row = Polyimide film 01, L1, T1 ( ) .120 ( ) .020 LC Pick & Place Pad 03, L3 ( ) .075 ( ) .016 SH = Locking Clip (Not available with DH, SH).

5 = Single Horizontal (Available with all lead styles). (05 thru 30 positions only) (Manual placement required). ( ) .050 x No. of Positions + ( ) .015 ( ) (SFM only) P..070 (Lead style 02 only) DS = Plastic Pick &. Place Pad ( ) = Dual Screw Down for .095. 01 ( ). DH ( mm) .062" PCB. (Not available with DH, SH). = Double Horizontal (05 thru 40 positions only)..050 TYP (Lead styles 01, 02 & 03 only). SINGLE ROW (05 thru 30 positions only) Specify TR last (SFM only) (Requires D row option). (Lead styles 02, (Lead style 02 only) (Not available with SFML). ( ) .050 x No. of Positions + ( ) .155 L2, T2 only). except for alignment pin option: (Mates with TFM-DS option). ( ) .050 x No. of Positions + ( ) .125 (Not available with A, TR. ( ) .080 ( ) ( ) LC, K, P, TR) = Tape & Reel 02 .050 .145 (Required callout ( ) ( ) ( ) for DH, SH)..145 .120 .335. ( ) 01 ( )..050 TYP DOUBLE ROW.

6 070. ( ) ( ) DS..095 .145 ( D, 01 02 & 03) ( ) ( )..050 .065. ( )..180 ( )..110. ( ) A ( ) .050 DIA ( ) x ( )..005 ( ) .063 .056 .010. TYP B A LC. Due to technical progress, all designs, specifications and components are subject to change without notice. All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.