SAFETY DATA SHEET - Agilent

1 Section 1. Identification10 percent PEG-20M on Chromosorb W packed GC columnCHEMTREC : 1-800-424-9300 SAFETY data SHEETP roduct nameIn case of emergency::Supplier/Manufacturer: Agilent Technologies, Stevens Creek BlvdSanta Clara, CA 95051, USA800-227-977010 percent PEG-20M on Chromosorb W packed GC columnConforms to US OSHA Hazard Communication , G3591-81119, G3591-82119:Part uses:Reagents and Standards for Analytical Chemistry Laboratory UsePacked GC chromatography columnG3591-80119 2M 1/8 2mm 10percent PEG-20M/W 80/100 SSG3591-81119 2M 1/8 2mm 10percent PEG-20M/W 80/100 UMG3591-82119 2M 1/8 2mm 10percent PEG-20M/W 80/100 NiValidation date:7/25 Relevant identified uses of the substance or mixture and uses advised againstThis product is considered an article.

2 This SAFETY data SHEET is written based on the encapsulated substance or mixture in this Product Details of the supplier of the SAFETY data Emergency telephone numberSection 2. Hazards identificationClassification of the substance or mixtureSignal word:No signal statements:No known significant effects or critical GHS label elementsPercentage of the mixture consisting of ingredient(s) of unknown dermal toxicity: > 60%Percentage of the mixture consisting of ingredient(s) of unknown inhalation toxicity: >60%Percentage of the mixture consisting of ingredient(s) of unknown oral toxicity: > 60%Percentage of the mixture consisting of ingredient(s) of unknown hazards to the aquatic environment: 90%OSHA/HCS status:While this material is not considered hazardous by the OSHA Hazard Communication Standard (29 CFR ), this SDS contains valuable information critical to the safe handling and proper use of the product.

3 This SDS should be retained and available for employees and other users of this article, when used under reasonable conditions and in accordance with the directions for use, should not present a health hazard. The substance or mixture is encapsulated in the article. Only if released due to use or processing of the article in a manner not in accordance with the product s directions for use it may present potential health and SAFETY of unknown toxicity:Not Classification of the substance or mixture1/10 Date of issue :07/25/201810 percent PEG-20M on Chromosorb W packed GC columnSection 2. Hazards identificationPrevention:Not :Not :Not :Not not otherwise classified:None Other hazardsSection 3. Composition/information on ingredientsSubstance/mixture:Occupationa l exposure limits, if available, are listed in Section (encapsulated in article)Any concentration shown as a range is to protect confidentiality or is due to batch are no ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this article, when used under reasonable conditions and in accordance with the directions for use, should not present a health hazard.

4 The substance or mixture is encapsulated in the article. Only if released due to use or processing of the article in a manner not in accordance with the product s directions for use it may present potential health and SAFETY out mouth with water. Remove victim to fresh air and keep at rest in a position comfortable for breathing. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Do not induce vomiting unless directed to do so by medical personnel. Get medical attention if symptoms flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Get medical attention if irritation contaminated skin with plenty of water.

5 Remove contaminated clothing and shoes. Get medical attention if symptoms victim to fresh air and keep at rest in a position comfortable for breathing. Get medical attention if symptoms 4. First aid measuresEye contactSkin contactInhalationIngestion::::Notes to physician:Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested or Description of necessary first aid Most important symptoms/effects, acute and delayedInhalation:No known significant effects or critical known significant effects or critical hazards.:IngestionSkin contact:No known significant effects or critical known significant effects or critical hazards.:Eye contactOver-exposure signs/symptomsSkin contactIngestionInhalationNo specific specific specific data .

6 :::Eye contact:No specific acute health Indication of immediate medical attention and special treatment needed, if necessary2/10 Date of issue :07/25/201810 percent PEG-20M on Chromosorb W packed GC columnSection 4. First aid measuresProtection of first-aiders:No action shall be taken involving any personal risk or without suitable treatments:No specific toxicological information (Section 11)Section 5. Fire-fighting measuresPromptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable thermal decomposition productsSpecific hazards arising from the chemicalDecomposition products may include the following materials:carbon dioxidecarbon monoxidemetal oxide/oxidesNo specific fire or explosion should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure protective equipment for fire-fightersUse an extinguishing agent suitable for the surrounding Extinguishing media:::None extinguishing media:Unsuitable extinguishing media:Special protective actions for fire- Special hazards arising from the substance or Advice for firefightersSection 6.

7 Accidental release Environmental Personal precautions, protective equipment and emergency procedures::No action shall be taken involving any personal risk or without suitable surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. Put on appropriate personal protective dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air).Move containers from spill area. Vacuum or sweep up material and place in a designated, labeled waste container. Dispose of via a licensed waste disposal for cleaning Methods and materials for containment and cleaning upFor non-emergency personnelFor emergency responders:If specialized clothing is required to deal with the spillage, take note of any information in Section 8 on suitable and unsuitable materials.

8 See also the information in "For non-emergency personnel".3/10 Date of issue :07/25/201810 percent PEG-20M on Chromosorb W packed GC columnSection 7. Handling and storageAdvice on general occupational Conditions for safe storage, including any incompatibilitiesEating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating,drinking and smoking. Remove contaminated clothing and protective equipment before entering eating areas. See also Section 8 for additional information on hygiene in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink.

9 Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination. See Section 10 for incompatible materials before handling or use.::Protective measuresPut on appropriate personal protective equipment (see Section 8). Precautions for safe handlingRecommendations::Industrial sector specific solutionsNot applications, Professional Specific end use(s) 8. Exposure controls/personal protectionIngredient nameExposure limitsSafety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists,gases or dusts.

10 If contact is possible, the following protection should be worn, unless the assessment indicates a higher degree of protection: SAFETY glasses with protection:Environmental exposure controls:Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable engineering controls:Good general ventilation should be sufficient to control worker exposure to airborne hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working techniques should be used to remove potentially contaminated contaminated clothing before reusing.