SAFETY DATA SHEET - lidorr.com

1 LUSTRAN / NOVODUR ABS PelletsIDENTIFICATION OF THE SUBSTANCE/PREPARATIONAND OF THE COMPANY/UNDERTAKINGSAFETY data SHEETP roduct nameLUSTRAN / NOVODUR ABS PelletsConforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK)1.:Use of thesubstance/preparation:Production of moulded plastic articlesIdentification of the substance or preparationSupplier/Manufacturer:INEOS ABS (Spain), gono Industrial, Ctra. de Vilaseca - La Tarragona, SpainTelephone: +49 214 30 65109, E-Mail: telephone number:0870 190 6777.

2 National Chemical Emergency CentreHAZARDS IDENTIFICATIONThe preparation is not classified as dangerous according to Directive 1999/45/EC and its section 11 for more detailed information on health effects and ON INGREDIENTSP roduct definition (REACH):acrylonitrile-butadiene-styrene the present knowledge of the supplier, this product does not contain any hazardousingredients in quantities requiring reporting in this section, in accordance with EU or measuresInhalation::FIRST AID MEASURESSee section 11 for more detailed information on health effects and inhaled, remove to fresh air.

3 If breathing is difficult, give not breathing, give artificial respiration. Get medical WITH THE HOT MELT: Cooling immediately with plentyof water. Do not remove product crusts which may have formedneither forcibly nor by applying any solvents to the skin involved. Inorder to obtain medical care for possible burns and for a smoothcleansing of the skin, seek medical advice of issue: 2008-07-16 Page: 1/7 LUSTRAN / NOVODUR ABS Pellets00000005/ 1 FIRE-FIGHTING isolate the scene by removing all persons from the vicinityof the incident if there is a fire.

4 No action shall be taken involvingany personal risk or without suitable combustionproductsSpecial exposure hazardsDecomposition products may include the following materials:carbon oxidesnitrogen oxidesNo specific fire or explosion should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-pieceoperated in positive pressure protectiveequipment for fire-fightersIn case of fire, use water spray (fog), foam, dry chemical or media:::None :Not RELEASE MEASURESE nvironmental precautionsPersonal precautionsTake up mechanically.

5 ::Granular solid. Hazard of slipping on spilt product. Melt: wherethere is a risk of exothermal decomposition as a result of overheating(rise in temperature, formation of fumes or smoke) cool the melt in awater bathNo special measures spill:Take up spill:HANDLING AND materialsUse original container.:RecommendedHandlingStorage:St ore in a dry good ventilation and/or local exhaust systems are used,the Occupational Exposure Limit(s) stated in Chapter 8 should notbe exceeded. Dust must be removed by effective extraction.

6 Duringregranulation avoid formation of inhaling vapours. Avoid inhaling dust. Grease skin. Washhands, forearms and face thoroughly after handling chemicalproducts, before eating, smoking and using the lavatory and at theend of the working period. When using do not eat, drink or smoke. CONTROLS/PERSONAL PROTECTIONThe regulations for the substances listed below must be observed when processing this product,particularly if processing takes place at elevated temperatures. In our experience the provision ofeffective fresh-air and exhaust ventilation equipment at the points where vapors may be generated willensure compliance with the tolerance limits quoted exposure limitsIngredient nameDate of issue: 2008-07-16 Page: 2/7 LUSTRAN / NOVODUR ABS Pellets00000005/ 1 Occupational exposure limitsIngredient nameethylbenzeneEH40-WEL (United Kingdom (UK), 8/2007).

7 SkinWEL 15 min limit: 552 mg/m 15 minute(s). WEL 8 hrs limit: 441 mg/m 8 hour(s).styreneEH40-WEL (United Kingdom (UK), 8/2007).WEL 15 min limit: 1080 mg/m 15 minute(s). WEL 8 hrs limit: 430 mg/m 8 hour(s).acrylonitrileEH40-WEL (United Kingdom (UK), 8/2007). SkinWEL 8 hrs limit: mg/m 8 hour(s).1,3-butadieneEH40-WEL (United Kingdom (UK), 8/2007).WEL 8 hrs limit: 22 mg/m 8 hour(s).Use process enclosures, local exhaust ventilation or otherengineering controls to keep airborne levels below recommendedexposure limits.

8 If user operations generate dust, fumes or mist,use ventilation to keep exposure to airborne contaminants below theexposure limit.:Technical measuresIn case of dust formation use respiratory equipment with filter typeparticle filter P1 according to DIN EN 143.:Respiratory protectionProtective gloves of leather, contaminated or damaged glovesshould be replaced.:Hand protectionProtective goggles with side shield or tightly fitting protectivegoggles:Eye protectionSkin covering working clothes; wear dust-proof overalls if largequantities of dust are generated.

9 :Skin protectionHygiene measures:Wash hands, forearms and face thoroughly after handling chemicalproducts, before eating, smoking and using the lavatory and at theend of the working period. Appropriate techniques should be usedto remove potentially contaminated clothing. Wash contaminatedclothing before reusing. Ensure that eyewash stations and safetyshowers are close to the workstation monitoringprocedures:If this product contains ingredients with exposure limits, personal,workplace atmosphere or biological monitoring may be required todetermine the effectiveness of the ventilation or other controlmeasures and/or the necessity to use respiratory protectiveequipment.

10 Reference should be made to European Standard EN689 for methods for the assessment of exposure by inhalation tochemical agents and national guidance documents for methods forthe determination of hazardous management measuresPersonal protection measuresOccupational exposure controls:Technical measuresEmissions from ventilation or work process equipment should bechecked to ensure they comply with the requirements ofenvironmental protection legislation. In some cases, fumescrubbers, filters or engineering modifications to the processequipment will be necessary to reduce emissions to exposure controlsDate of issue: 2008-07-16 Page: 3/7 LUSTRAN / NOVODUR ABS Pellets00000005/ 1 PHYSICAL AND CHEMICAL PROPERTIESP hysical stateMelting pointSolid.